Operating Instructions

255
10. Using the Wi-Fi function
1 Connect to a smartphone. (P249)
2 Operate the smartphone.
You can send location information acquired with a smartphone to the camera. After
sending the information, you can also write it on images stored in the camera.
• Once the location information is sent to the camera, you can also write it on images by
performing [Location Logging] (P225) in the [Playback] menu.
• Location information different from that at the time of recording may be written. Keep the
following points in mind:
– Set the camera’s [Home] setting in [World Time] to your region.
– Once you start recording location information with your smartphone, do not change the
camera’s [Home] setting in [World Time].
• Location information cannot be written on images that were recorded when the clock was not
set.
Sending images in the camera to an SNS
1 Select [ ].
• You can switch the images to be
displayed by selecting the icon (
A
)
on the top left of the screen. To
display images stored in the camera,
select [LUMIX].
2 Touch and hold an image, and drag
it to send it to an SNS, etc.
• The image is sent to a web service
such as an SNS.
Adding location information to images stored in the camera from a
smartphone/tablet
A Start recording location
information
B Start recording images
C Finish recording the location
information
D Sending and writing location
information




2
1
4
3
GPS



