Operating Instructions

5. Focus/Zoom
100

Magnify the AF Area Position ([AF-Point Scope])
This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In
other AF modes, the centre of the screen is magnified.)
You can check focus and observe an enlarged subject as with a telephoto
lens.
1
Register [AF-Point Scope] to the Fn button. (l 367)
2
Enlarge the AF area position by pressing and holding the Fn button.
0
When the screen is enlarged, pressing the
shutter button halfway re-acquires focus in
a small central AF area.
0 When the screen is enlarged, turn or
to adjust the magnification.
Use for more detailed adjustments.
0 When the screen is enlarged, [AFC] changes to [AFS].
0 When the following functions are being used, AF-Point Scope cannot be used:
– Video recording/[Post-Focus]
– [6K/4K Pre-Burst]
– [65:24]/[2:1] ([Aspect Ratio])
– [Miniature Effect] ([Filter Settings])
– [Multiple Exposure]
– [Live Cropping]
– [Video-Priority Display]
0 You can change the display method of the magnified screen:
[] ¨ [ ] ¨ [AF-Point Scope Setting] (l 424)