Operating Instructions

6. Drive/Shutter/Image Stabiliser
169
Selecting the Focus Point for the Picture to Save
1
Select a Post-Focus image on
the playback screen. (l 347)
≥Select an image with the [ ]
icon and then press 3.
≥You can also perform the same
operation by touching the [ ]
icon.
2
Touch the focus point.
0 When the point is in focus, a green frame
appears.
0 If there is no picture with the selected
point in focus, a red frame appears.
A picture cannot be saved.
0 The edge of the screen cannot be
selected.
3
Save the picture.
≥Touch [ ].
0
The picture is saved in JPEG format.