Operating Instructions

6. Drive/Shutter/Image Stabiliser
182

[Boost I.S. (Video)]
Increase the effectiveness of the image stabiliser during video recording.
This effect can help provide a stable composition when you want to
perform recording from a fixed perspective.
Settings: [ON]/[OFF]
0
When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen.
0 To change composition while recording, first set this to [OFF] before moving the
camera.
To set this to [OFF] during recording, use the Fn button. (l 367)
0 Longer focal lengths will result in weaker stabilisation.

[Anamorphic (Video)]
You can switch to an image stabiliser that suits anamorphic recording.
0
Make settings to suit the magnification of the anamorphic lens you are using.
0 While [Anamorphic (Video)] is functioning, the set magnification appears on the
image stabiliser icons on the recording screen, as shown by [ ] and [ ].
0 When [Body(B.I.S.) / Lens(O.I.S.)] is set to [ ], [Boost I.S. (Video)] is not
available.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Boost I.S.
(Video)] (l 367)
Settings: [ ]([2.0k])/[ ]([1.8k])/[ ]([1.5k])/[ ]([1.33k])/
[]([1.30k])/[OFF]
0 When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritised.
0 When the following function is being used, [Anamorphic (Video)] is fixed to
[OFF]:
– [ ] ([Body(B.I.S.) / Lens(O.I.S.)])
0 Image stabiliser functions on your lens may not work correctly. Turn off the
image stabiliser function on your lens if this is the case.