Operating Instructions

12. Connections with External Devices (Video)
342

Reduction of Wind Noise
This reduces wind noise when an external microphone is connected.
¨ [ ] ¨ [ ] ¨ Select [Wind Cut]
Settings: [HIGH]/[STANDARD]/[LOW]/[OFF]
0 You can register the [MANUAL] sound pickup range setting in an Fn button:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Mic. Directivity
Adjust] (l 367)
0 While the external microphone is connected, [ ] is displayed on the
screen.
0 When an external microphone is connected, [Sound Rec Level Disp.]
automatically turns [ON], and the recording level is displayed on the screen.
0 When [Mute Sound Input] is set to [ON], the audio input from the external
microphone is muted.
0 When the external microphone is attached, do not carry the camera by holding
the external microphone. It may become detached.
0 If noises are recorded when using the AC adaptor, use the battery.
0 When a Stereo Microphone (VW-VMS10: optional) is used, [Special Mic.] is
fixed to [STEREO].
0 Setting [Wind Cut] may alter the usual sound quality.
0 For details, refer to the operating instructions for the external microphone.