Operating Instructions

2. Getting Started
40

Removing the Battery
1
Set the camera on/off switch to [OFF].
2
Open the battery door.
0
Check that the card access light A is
turned off and then open the battery door.
3
Push the lever B in the direction of the
arrow and then remove the battery.
0 Ensure that no foreign objects are adhering to the inner side (rubber seal) of
the battery door.
0 Remove the battery after use.
(The battery will drain if left inserted in the camera for a long period of time.)
0 The battery becomes warm after use, during charging, and immediately after
charging.
The camera also becomes warm during use. This is not a malfunction.
0 Be careful when removing the battery as the battery will jump out.
