Operating Instructions

15. Menu Guide
449
[Setup] menu ¨ [IN/OUT]
[Bluetooth]
[Bluetooth] (l 469)
[Send Image (Smartphone)] (l 496)
[Remote Wakeup] (l 489)
[Returning from Sleep Mode] (l 482)
[Auto Transfer] (l 486)
[Location Logging] (l 488)
[Auto Clock Set] (l 490)
[Wi-Fi network settings]
[Wi-Fi network settings]: Registers the Wi-Fi access point.
Wireless access points used to connect the camera to Wi-Fi
networks will be registered automatically.
[USB]
[USB Mode] `[y][Select on connection]/
[z][PC(Storage)]/
[ ][PC(Tether)]/
[{][PictBridge(PTP)]
This sets the communication method to be used when the
USB connection cable is connected.
[y][Select on connection]: Select this setting to select
the USB communication system when connecting to another
device.
[z][PC(Storage)]: Select this setting to export images to a
connected PC.
[ ][PC(Tether)]: Select this setting to control the camera
from a PC installed with “LUMIX Tether”.
[{][PictBridge(PTP)]: Select this setting when connecting
to a printer that supports PictBridge.
[USB Power Supply] `[ON]/[OFF]
Provides power from the USB connection cable. (l 43)
0 Even if this item is set to [OFF], power will be supplied
when the AC adaptor is connected.