Operating Instructions

15. Menu Guide
456

How to Select an Image(s) in the [Playback] menu
Follow the steps below when the image selection screen is displayed.
0
When [Single] and [Multi] are not available, select an image in the same way as
when [Single] is selected.
0 Images are displayed separately by card slot.
To switch the card to display, press [ ] and select the card slot.
0 You can only select images on one card at a time.
When [Single] has been selected
1
Press 21 to select the image.
2
Press or .
0
If [Set/Cancel] is displayed at the right
bottom of the screen, the setting is
cancelled when or is pressed
again.
When [Multi] has been selected
1
Press 3421 to select the image and
then press or (repeat).
0
The setting is cancelled when or
is pressed again.
2
Press [DISP.] to execute.
When [Protect] is selected
Press 3421 to select the image, and
then press or to set (repeat).
0
The setting is cancelled when or is
pressed again.
[Playback] Menu
0 Images recorded by another device may not be correctly played back or
edited with the camera.
6HW
321
654
2.
ュリヴヱハ
321
654
6HW&DQFHO