Operating Instructions

17. Connecting to Other Devices
534
Operating the Camera from a PC
Getting started:
0 Turn on the camera and PC.
0 Install “LUMIX Tether” on PC.
1
Connect the camera and PC with the USB connection
cable (C–C or A–C). (l 522)
2
Press 34 to select [PC(Tether)] and then press or
.
≥[ ] is displayed on the camera’s screen.
0
A message about charging may be displayed. Wait for a while until the
message disappears.
3
Use “LUMIX Tether” to operate the camera from the PC.
0 To output via HDMI to an external monitor or TV, connect the camera with an
HDMI cable. (l 524)
0 If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the
camera will be automatically connected to the PC without the [USB Mode]
selection screen being displayed. (l 449)
0 The Wi-Fi/Bluetooth functions are not available while there is a PC connection
with [PC(Tether)].