Operating Instructions

18. Materials
540
Getting started:
0 Turn the camera off, and remove the cover for the battery grip connector.
1
Attach the Battery Grip to the camera.
2
Turn on the camera.
3
Set the battery use priority.
0
¨ [ ] ¨ [ ] ¨ [Battery Use Priority]
Shutter Remote Control (Optional)
You can connect the Shutter Remote Control
(DMW-RS2: optional) to use the camera as
follows:
– Fully pressing the shutter button without camera shake
– Securing the shutter button during bulb recording and
burst recording
– Start/end the video recording
– Using the functions registered in the video rec. button of
the Shutter Remote Control
[BODY] The battery in the camera is used first.
[BG] The battery in the Battery Grip is used first.
0 When the battery in the Battery Grip is used, [ ] is displayed on the
monitor.
0 You can register functions of your choice to the [Fn] button on the Battery
Grip. (l 367)
The [WB] button, [ISO] button, [ ] button, [AF ON] button, and joystick
each work the same as the buttons and joystick on the camera body.
0 Refer to the operating instructions for the Battery Grip for details.