Operating Instructions

18. Materials
557
First, try out the following procedures (l 557 to 568).
0
[Power Save Mode] is enabled. (l 46)
0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
Set these settings only when recording.
0 When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Power Save Mode] (l 46).
0 In high ambient temperatures or if the camera is used for continuous recording, the
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [ ] is displayed,
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
– Video recording
– [AF-Point Scope]
Troubleshooting
If the problem is not resolved, it may be improved by selecting
[Reset] (l 80) on the [Setup] ([Setting]) menu.
Power, Battery
The camera turns off automatically.
The battery becomes flat too quickly.
Recording
Recording stops before finishing.
Cannot record.
Cannot use some functions.