Operating Instructions

Firmware Ver. 2.0
F-6
Outputting RAW Video Data via HDMI
[HDMI RAW Data Output] has been added to the [Video] menu. The image
quality for the output images is set in [Rec Quality].
Getting started:
1 Turn off the camera and the external recorder.
2 Connect the camera and the external recorder with a commercially available
HDMI cable.
0 Use a “High Speed HDMI cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long)
3 Turn on the camera and the external recorder.
1
Set the mode dial to [ ].
2
Set [HDMI RAW Data Output].
≥ ¨ [ ] ¨ [ ] ¨ [HDMI
RAW Data Output] ¨ [ON]
0
[HDMI RAW] is displayed on the
recording screen.
0 Video cannot be recorded to cards while RAW Video Data is being output via
HDMI.
0 When [System Frequency] is set to [24.00Hz (CINEMA)], RAW Video Data
cannot be output via HDMI.