Operating Instructions

Firmware Ver. 2.0
F-9

Monitor/Viewfinder Display When Outputting RAW Video
Data
Images equivalent to those recorded when recording with V-Log are
displayed on the monitor/viewfinder of the camera for monitoring purposes.
[LUT View Assist (Monitor)] with the [Vlog_709] preset applied can be used
for the [V-Log View Assist].
0
The LUT for the monitor display cannot be change.
0 When you use [LUT View Assist (Monitor)], [709] is displayed on the screen and
[RAW] is displayed on the screen as a [LUT View Assist (HDMI)] item.
0 [Luminance Spot Meter], and [BASE/RANGE] of [Zebra Pattern] are set at “Stop”
units.
(Calculated as “0 Stop”=42 % (IRE))
Notes on displayed images
0
The images displayed on the camera do not affect the RAW Video Data that is
output.
0 The images displayed on the external recorder are images that suit the external
recorder specifications. This means that there may be differences between the
images displayed on the camera and the images displayed on the external recorder.
0 The monitor/viewfinder of the camera shows images with the angle of view of the
RAW Video Data. There may be some difference with the angle of view of the data
recorded on the external recorder.