Operating Instructions

Firmware Ver. 2.0
F-10

[HDMI Time Code Output]/[HDMI Recording Control]
The time code of the camera can be added and output via HDMI to the
external recorder.
In addition, recording can be started and stopped on the external recorder
by using the video rec. button and shutter button of the camera.
1
Set [HDMI Time Code Output] to [ON].
0
¨ [ ] ¨ [ ] ¨ [Time Code] ¨ [HDMI Time Code Output] ¨ [ON]
2
Set [HDMI Recording Control] to [ON].
0
¨ [ ] ¨ [ ] ¨ [HDMI Rec Output] ¨ [HDMI Recording Control] ¨
[ON]
0 [HDMI Recording Control] can be set when [HDMI Time Code Output] is set to
[ON] in [ ] mode.