Operating Instructions

10. Recording Videos
DVQX2068 (ENG)
104
2
Select [Time Code].
≥ ¨ [ ] ¨ [ ] ¨ [Time Code]
[Time Code
Display]
Displays the time code on the recording screen/playback screen.
[Count Up]
[REC RUN] Counts the time code only when recording videos.
[FREE RUN]
Counts the time code also when video recording is
stopped and when the camera is turned off.
[Time Code
Value]
[Reset] Sets to 00:00:00:00 (hour: minute: second: frame)
[Manual
Input]
Manually input hour, minute, second and frame.
[Current
Time]
Sets hour, minute and second to current time and
sets frame to 00.
[Time Code
Mode]
[DF]
Drop Frame. The camera modifies the difference
between recorded time and time code.
0 Seconds and frames are separated by “.”.
(Example: 00:00:00.00)
[NDF]
Non-Drop Frame. Records the time code without
drop frame.
0 Seconds and frames are separated by “:”.
(Example: 00:00:00:00)
0 When the following functions are being used, [Time Code Mode]
is fixed to [NDF]:
– [PAL] ([Switch NTSC/PAL])
– 24p [Rec Quality]
[HDMI Time
Code Output]
Time code information is added to images output via HDMI when
recording with the [ ] mode.
0 The time code can also be output via HDMI by setting the mode
dial to [ ] during playback. In the [Setup] ([IN/OUT]) menu,
set [HDMI Mode (Playback)] in [TV Connection] to [AUTO].
0 The device screen may go dark depending on the connected
device.
DC-S5E-DVQX2068_eng.book 104 ページ ２０２０年７月２８日 火曜日 午後３時２分