Operating Instructions

17. Materials
DVQX2068 (ENG)
177
First, try out the following procedures (l 177 to 178).
0
When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
Set these settings only when recording.
0 When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Power Save Mode] (l 154).
0 In high ambient temperatures or if the camera is used for continuous recording, the
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [ ] is displayed,
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
– Video recording
– [AF-Point Scope]
– HDMI output
– Power supply
0 Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]?
– Is [Focus/Shutter Priority] set to [RELEASE]?
– Is AF Lock set where it is not appropriate?
Troubleshooting
If the problem is not resolved, it may be improved by selecting
[Reset] (l 37) on the [Setup] ([Setting]) menu.
0
Please also refer to the “Operating Instructions” (PDF format), which
describes more detailed information.
The battery becomes flat too quickly.
Recording stops before finishing.
Cannot record.
Cannot use some functions.
The subject is not focused properly.
DC-S5E-DVQX2068_eng.book 177 ページ ２０２０年７月２８日 火曜日 午後３時２分