Operating Instructions

17. Materials
DVQX2068 (ENG)
178
0 This is characteristic of CMOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
0 When using the electronic shutter, lowering the shutter speed may reduce the effect
of the horizontal stripes.
0 If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)], or fix the shutter speed with the [ ]/[S&Q]
mode (l 95).
0 When recording under lighting such as fluorescent or LED lighting, increasing the
shutter speed may introduce slight changes to brightness or coloring.
These are a result of the characteristics of the light source and do not indicate a
malfunction.
0 When recording subjects in extremely bright locations or recording under lighting
such as fluorescent, LED, mercury, or sodium lighting, the coloring or screen
brightness may change or horizontal striping may appear on the screen.
0 The flash does not fire when using the following functions:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
– [ELEC.]/[Silent Mode]/[High Resolution Mode]
– [Filter Settings]
0 The sound is caused by the in-body stabilizer. This is not a malfunction.
0 This is the sound of the lens moving and aperture operation. It is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent or
LED lighting.
The brightness or coloring of the recorded image is different from the
actual scene.
The flash does not fire.
When the camera is shaken, a rattling sound is heard from the
camera.
There is rattling noise from the lens when the camera is turned on or
off, or when the camera is swung.
There is a sound from the lens when recording.
DC-S5E-DVQX2068_eng.book 178 ページ ２０２０年７月２８日 火曜日 午後３時２分