Operating Instructions Digital Camera DC-S5 A firmware update has been made available to improve camera capabilities and to add functionality. 0 For information about functions that have been added or modified, refer to the pages for “Firmware Update”. Î Click here to move to “Firmware Update”.
Please read these instructions carefully before using this product, and save this manual for future use. Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in this document. Carefully observe copyright laws.
About Operating Instructions Symbols Used in This Document Symbols for recording modes, pictures, and videos that can be used In this document, symbols are placed at the start of functional explanations (recording modes, pictures, and videos) showing conditions in which these functions can be used. Black icons show conditions in which these can be used, and gray icons show conditions in which these cannot be used.
About Operating Instructions Notification classification symbols In this document, notifications are classified and described using the following symbols: To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number 0 Images and illustrations used in this document are for explaining the functions.
Chapters 1. Introduction 19 2. Getting Started 33 3. Basic Operations 57 4. Image Recording 83 5. Focus/Zoom 92 6. Drive/Shutter/Image Stabilizer 128 7. Metering/Exposure/ISO Sensitivity 184 8. White Balance/Image Quality 202 9. Flash 227 10. Recording Videos 240 11. Connections with External Devices (Video) 289 12. Playing Back and Editing of Images 300 13. Camera Customization 320 14. Menu Guide 344 15. Wi-Fi/Bluetooth 416 16. Connecting to Other Devices 473 17.
Contents About Operating Instructions .......................................................3 Chapters ......................................................................................5 Contents by Function.................................................................15 1. Introduction 19 Before Use.................................................................................19 Standard Accessories................................................................22 Lenses That Can Be Used......
Contents 3. Basic Operations 57 Basic Recording Operations ......................................................57 How to Hold the Camera ................................................................... 57 Recording .......................................................................................... 59 Selecting the Recording Mode .......................................................... 60 Camera Setting Operations .......................................................
Contents 5. Focus/Zoom 92 Selecting the Focus Mode .........................................................93 Using AF ....................................................................................94 [AF Custom Setting(Photo)] .............................................................. 98 Selecting the AF Mode ............................................................100 [Face/Eye/Body/Animal Detect.]..................................................... 102 [Tracking]........................
Contents Post-Focus Recording .............................................................166 Selecting the Focus Point for the Picture to Save ........................... 169 Focus Stacking ................................................................................ 171 [Silent Mode]............................................................................174 [Shutter Type] ..........................................................................175 Image Stabilizer ..............................
Contents 9. Flash 227 Using an External Flash (Optional)..........................................227 Removing the Hot Shoe Cover........................................................ 227 Setting Flash............................................................................229 [Flash Mode].................................................................................... 229 [Red-Eye Removal] .........................................................................
Contents [Luminance Spot Meter] .................................................................. 266 [Zebra Pattern] ................................................................................ 267 [Frame Marker] ................................................................................ 268 Slow & Quick Video .................................................................269 [Live Cropping].........................................................................272 Log Recording ............
Contents 13. Camera Customization 320 Fn Buttons ...............................................................................321 Register Functions to the Fn Buttons .............................................. 323 Use the Fn Buttons.......................................................................... 329 [Dial Operation Switch] ............................................................330 Register Functions to the Dials........................................................
Contents [Import images]................................................................................ 435 [Auto Transfer]................................................................................. 437 [Location Logging] ........................................................................... 439 [Remote Wakeup]............................................................................ 440 [Auto Clock Set]...............................................................................
Contents 17. Materials 490 Using Optional Accessories.....................................................490 Battery Grip (Optional) .................................................................... 490 Shutter Remote Control (Optional) .................................................. 491 Tripod Grip (Optional)...................................................................... 492 AC Adaptor (Optional)/DC Coupler (Optional)................................. 492 Monitor/Viewfinder Displays ......
Contents by Function Power Source Viewfinder Charging l 34 Diopter adjustment l 65 Charging error l 36 l 40 Eye sensor l 66 [Eye Sensor AF] l 376 Battery indication l 42 Power supply l 41 Power save function l 44 Display Recording screen l 493 Playback screen l 499 Viewfinder l 32 Control panel l 71 l 497 Switching display l 67 Monitor/viewfinder adjustment l 397 Monitor/viewfinder luminance l 398 Switching the playback card l 302 l 308 Display speed l 396 Level gauge Fol
Contents by Function Enlarged display l 97 l 122 Setting the AF sensitivity l 98 l 258 AF/AE Lock l 198 Touch AF l 80 l 117 [Touch Pad AF] l 118 [AF Assist Light] l 355 MF l 120 [MF Guide] l 374 [MF Assist] l 374 [Focus Peaking] l 356 Image Stabilizer [Picture Size] l 85 [Picture Quality] l 86 RAW l 86 JPEG l 86 Aspect ratio l 83 [White Balance] l 202 [Photo Style] l 208 [Filter Settings] l 215 [Color Space] l 371 [Reduce Rolling Shutter] l 140 [6K/4K PHOTO Noise Re
Contents by Function Exposure Display (Video) [Exposure Comp.] l 196 [Waveform Monitor] l 264 Program Shift l 186 [Luminance Spot Meter] l 266 Preview mode [Zebra Pattern] l 267 [Frame Marker] l 268 AE Lock l 195 l 184 l 198 [One Push AE] l 325 [Touch AE] l 81 [Sensitivity] l 199 [Extended ISO] l 371 [Metering Mode] Flash External flash l 227 [Firing Mode] l 232 [Flash Mode] l 229 [Flash Adjust.] l 233 [Flash Synchro] [Wireless Flash Setup] Image Quality (Video) [Rec.
Contents by Function Playback Connecting with Other Devices [Auto Review] l 382 Sending images (PC) l 478 Playing back pictures l 300 Printing l 486 Playing back videos l 303 Viewing on a TV l 475 Thumbnail display l 308 HDMI output Calendar display l 309 l 289 l 476 Enlarged display l 306 Tethered recording l 484 Group images l 310 Saving 6K/4K photos l 139 Bluetooth connection l 420 Viewing on a TV l 475 [Wi-Fi connection] Deleting l 311 l 424 l 460 Screen display l 4
1. Introduction Before Use Firmware of Your Camera/Lens Firmware updates may be provided in order to improve camera capabilities or to add functionality. For smoother recording, we recommend updating the firmware of the camera/lens to the latest version. 0 For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.
1. Introduction Splash Resistant Splash Resistant is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Resistant does not guarantee that damage will not occur if this camera is subjected to direct contact with water.
1. Introduction Be Sure to Perform Trial Recording in Advance Perform trial recording in advance of an important event (wedding, etc.) to check that recording can be performed normally. No Compensation Regarding Recording Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card.
1. Introduction Standard Accessories Check that all the accessories are supplied before using the camera. 0 The accessories and their shape will differ depending on the country or area where 0 0 0 0 the camera was purchased. For details on the accessories, refer to “Operating Instructions ” (supplied). Digital camera body is referred to as camera in this document. Battery pack is referred to as battery pack or battery in this document.
1. Introduction Lenses That Can Be Used The lens mount of this camera is compliant with the L-Mount standard of Leica Camera AG. It can be used with 35 mm full-frame interchangeable lenses and APS-C size interchangeable lenses of this standard. 0 The interchangeable lenses used in the explanations are designated as follows in this document.
1. Introduction Memory Cards That Can Be Used You can use the following memory cards with this camera. 0 SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. SD memory card (512 MB to 2 GB) SDHC memory card (4 GB to 32 GB) SDXC memory card (48 GB to 128 GB) 24 The SDHC/SDXC cards supported by card slot 1 and 2 on this camera are different.
1. Introduction Cards That Can Be Used Stably with This Camera When using the following functions, use cards that have the correct SD Speed Class, UHS Speed Class, and Video Speed Class. 0 Speed classes are standards to guarantee the minimum speed necessary for continuous writing.
1. Introduction 0 You can prevent the writing and deleting of data by setting the write-protect switch A on the card to “LOCK”. 0 The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card. We recommend backing up important data. 0 Keep the memory card out of reach of children to prevent swallowing.
1. Introduction Names of Parts Camera 5 6 7 8 9 10 11 12 1 2 3 13 4 14 15 1 Stereo microphone (l 263) 0 Do not block the microphone with a finger. Audio will be difficult to record. 2 Drive mode dial (l 128) 3 Hot shoe (hot shoe cover) (l 227) 0 Keep the hot shoe cover out of reach of children to prevent swallowing.
1.
1. Introduction 1 2 3 6 7 9 10 4 8 11 5 12 13 1 Eye cup (l 518) 6 [REMOTE] socket (l 491) 2 Viewfinder (l 32, 66, 493) 7 Card slot 1 (l 46) 3 Eye sensor (l 66) 8 Card slot 2 (l 46) 9 Card door (l 46) 4 Tripod mount (l 523) 0 If you attempt to attach a tripod with a screw length of 5.5 mm (0.22 inches) or more, you may not be able to securely fix it in place or it may damage the camera.
1. Introduction 5 1 6 2 7 3 8 9 4 10 11 12 13 14 15 16 1 1 Shoulder strap eyelet (l 33) 9 2 Preview button (l 195)/ Fn button (Fn2) (l 321) 10 USB port (l 39, 474) 3 Grip 12 Lens lock pin 4 Lens release button (l 49) 13 Sensor 5 Self-timer light (l 154)/ AF assist light (l 355) 14 Contact points 6 Diopter adjustment dial (l 65) 7 [MIC] socket (l 293) 8 Headphone socket (l 298) 0 Excessive sound pressure from earphones and headphones can cause hearing loss.
1. Introduction Supplied Lens S-R2060 1 2 3 4 5 6 7 1 Lens surface 5 Contact points 2 Focus ring (l 121) 6 Lens mount rubber (l 519) 3 Zoom ring (l 124) 7 Lens fitting mark (l 49) 4 [AF/MF] switch (l 94, 120) 0 You can switch between AF and MF. If [MF] is set on either the lens or camera, operation will be with MF. 0 Recording at or near the closest focusing distance at wide angle will degrade image quality around the edges of the image.
1. Introduction Viewfinder/Monitor Displays At the time of purchase, the viewfinder/monitor displays the following icons. 0 For information about the icons other than those described here, refer to page 493. Viewfinder 1 2 Monitor 3 4 5 FINE L 6 7 AFS FINE L 60 60 F3.5 8 9 1011 12 ISO100 13 AFS F3.
2. Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. 1 2 3 4 0 Pull the shoulder strap and check that it will not come out. 0 Attach the opposite end of the shoulder strap with the same procedure. 0 Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. It may result in injury or accident. 0 Do not leave the shoulder strap where an infant can reach it.
2. Getting Started Charging the Battery You can charge the battery either using the supplied charger, or in the camera body. You can also turn on the camera and supply power from an electrical outlet. 0 The battery that can be used with the camera is DMW-BLK22. (As of September 2020) 0 The battery is not charged at the time of purchase. Charge the battery before use. Charging with the Charger Charging time Approx. 230 min 0 Use the supplied charger and AC adaptor.
2. Getting Started 3 2 1 1 Connect the charger and the AC adaptor with the USB connection cable. 0 Check the direction of the terminals and plug in/out straight holding onto the 2 3 plug. (Inserting these at an angle may cause deformation or malfunction) Connect the AC adaptor to an electrical outlet. Insert the battery. 0 The charging lights ([CHARGE]) A blink and charging begins. 0 Do not use any other USB connection cables except the supplied one. This may cause malfunction.
2. Getting Started Charging Lights Indications Charging status 0 % to 49 % 50 % to 79 % 80 % to 99 % 100 % Charging lights A Blinking B On C Off 0 When the battery is inserted while the charger is not connected to the power source, the charging lights turn on for a certain period to allow you to confirm the battery level. 0 After charging, disconnect the power source connection and remove the battery. 0 If the [50%] light is blinking quickly, then charging is not occurring.
2. Getting Started Battery Insertion 0 Always use genuine Panasonic batteries (DMW-BLK22). 0 If you use other batteries, we cannot guarantee the quality of this product. 0 Check that the camera on/off switch is set to [OFF]. 1 3 2 0 Check that the lever A is holding the battery in place. Removing the Battery 1 Set the camera on/off switch to [OFF]. 2 Open the battery door. 0 Check that the card access light B is turned off and then open the battery door.
2. Getting Started 0 Ensure that no foreign objects are adhering to the inner side (cushion) of the battery door. 0 Remove the battery after use. (The battery will drain if left inserted in the camera for a long period of time.) 0 The battery becomes warm after use, during charging, and immediately after charging. The camera also becomes warm during use. This is not a malfunction. 0 Be careful when removing the battery as the battery will jump out.
2. Getting Started Inserting a Battery into the Camera for Charging Charging time Approx. 240 min 0 Using the camera body and the supplied AC adaptor. 0 The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal. 0 Use the products supplied with the camera for charging.
2. Getting Started Charging Light Indications Charging light (red) On: Charging. Off: Charging has completed. Blinking: Charging error. 0 You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable. Charging may take longer in this case. 0 The battery in the Battery Grip (DMW-BGS5: optional) cannot be charged. 0 Do not use any other USB connection cables except the supplied one. This may cause malfunction.
2. Getting Started Power Supply When the battery is inserted into the camera for charging and the camera is turned on, you can record while the camera is being supplied with power. 0 [ ] is displayed in the screen while power is being supplied. 0 You can also supply power by using a USB connection cable to connect the camera and a USB device (PC, etc.). 0 The battery cannot be charged while power is being supplied. 0 Turn off the camera before connecting or disconnecting the AC adaptor.
2. Getting Started Notifications Regarding Charging/Power Supply Power Indications Indication on monitor A USB connection cable supplying power B Battery indication C Using the battery in the Battery Grip 80 % or higher 60 % to 79 % 40 % to 59 % 20 % to 39 % 19 % or below Low battery Blinking 0 Charge or replace the battery. 0 The battery level indicated on the screen is approximate. The exact level varies depending on the environment and the operating conditions.
2. Getting Started 0 We recommend that genuine Panasonic batteries are used. There is a possibility that the use of non-genuine batteries can cause accidents or malfunctions that may lead to fire or explosion. Please be advised that we are not liable for any accident or failure resulting from the use of non-genuine batteries. 0 Do not leave any metal items (such as clips) near the contact areas of the power plug.
2. Getting Started [Power Save Mode] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. ¨[ ]¨[ ] ¨ Select [Power Save Mode] [Sleep Mode] Sets the amount of time until the camera is put to sleep. [Sleep Mode(Wi-Fi)] Sets the camera to sleep 15 minutes after being disconnected from Wi-Fi.
2.
2. Getting Started Inserting Cards (Optional) This camera supports the double card slot function. When two cards are used, relay recording, backup recording, and allocation recording are available. 2 1 3 A Card slot 1 (compatible with UHS-I/UHS-II) B Card slot 2 (compatible with UHS-I) 0 Match the orientation of the cards as shown in the figure and then insert them firmly until they click.
2. Getting Started Removing a Card 1 Open the card door. 0 Check that the card access light A is turned off and then open the card door. 2 Push the card until it clicks and then pull the card out straight. 0 The card may be warm just after the camera has been used. 0 Do not perform the following operations during access. The camera may operate incorrectly or the card and recorded images may be damaged. – Turn off the camera. – Remove the battery or card or disconnect the power plug.
2. Getting Started Formatting Cards (Initialization) Format the cards with the camera before use. 0 When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. ¨[ ]¨[ ] ¨ Select [Card Format] Settings: [Card Slot 1]/[Card Slot 2] 0 Do not turn off the camera or perform another operation during formatting. 0 Take care not to turn off the camera while formatting is in progress.
2. Getting Started Attaching a Lens You can attach the Leica Camera AG L-Mount standard lens to this camera. For information about the lenses that can be used, refer to page 23. 0 Check that the camera on/off switch is set to [OFF]. 0 Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 517. 0 Change the lens while the lens cap is attached.
2. Getting Started 0 When you have attached a lens that does not have a communication function with this camera, after turning on the camera, a message asking for confirmation of the focal length setting is displayed. You can register the focal length of the lens when you select [Yes]. (l 183) 0 Insert the lens straight in. Inserting this at an angle to attach it may damage the camera lens mount. 0 After removing the lens, be sure to attach the body cap and the lens rear cap.
2. Getting Started Attaching a Lens Hood For recording against strong backlight, a lens hood can reduce the inclusion of unwanted light in images and drop in contrast resulting from the irregular reflection of light that occurs within the lens. It allows you take more beautiful pictures by cutting out excess light. When attaching the lens hood (flower shape) supplied with the interchangeable lens (S-R2060) Hold the lens hood by placing your fingers as shown in the figure.
2. Getting Started Removing the Lens Hood While pressing the lens hood button A, rotate the lens hood in the direction of the arrow and then remove it. 0 The lens hood can be attached in the reverse direction when carrying the 1 2 camera. Align mark B ( ) on the lens hood with the mark on the tip of the lens. Attach the lens hood by rotating it in the direction of the arrow until it clicks.
2. Getting Started Adjusting the Monitor Direction and Angle At the time of purchase, the monitor is stowed in the camera body. 1 3 2 180° 90° 180° 0 The angles of adjustment are guides only. 0 Do not apply an excessive force to the monitor. This may cause damage or malfunction. 0 When not using the camera, close the monitor with the monitor surface facing in.
2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the time zone and clock appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information. 1 Set the camera on/off switch to [ON]. ≥If the language select screen is not displayed, proceed to Step . 4 2 3 4 5 When [Please set the language] appears, press . Set the language.
2. Getting Started 6 7 When [Please set the clock] appears, press or . Set the clock. 21: Select an item (year, month, day, hour, minute, or second). 34: Select a value. To set the display order B and time display format C ≥Press 21 to select [Style] and then press or to display the screen for setting the display order and time display format. 8 9 Confirm your selection. ≥Press or . When [The clock setting has been completed.] appears, press or .
2. Getting Started 0 If the camera is used without setting the clock, it will be set to 0:00:00, 1st January 2020. 0 Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx. 24 hours to charge the built-in battery.
3. Basic Operations Basic Recording Operations How to Hold the Camera To minimize camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ≥ Hold the camera firmly by wrapping your right hand around the camera grip. ≥ Support the lens from below with your left hand. 0 Do not cover the AF assist light A or microphone B with your fingers or other objects.
3. Basic Operations Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. 0 If you set [Rotate Disp.] to [OFF], pictures will be played back without being rotated. (l 407) 0 When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly.
3. Basic Operations Recording 1 Adjust the focus. ≥Press the shutter button halfway (press it gently). ≥The aperture value A and shutter speed B are displayed. (When the correct exposure cannot be obtained, the indications blink in red.) ≥Once the subject is in focus, the focus icon C lights. (When the subject is not in focus, the icon blinks.) 60 F3.5 0 You can also perform the same operation by pressing [AF ON]. 2 Start recording. ≥Press the shutter button fully (press it further).
3. Basic Operations 0 Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the picture display duration to your preferred setting. (l 382) 0 With the default settings, you cannot take a picture until the subject is brought into focus. If you set [Focus/Shutter Priority] in the [Custom] ([Focus/Shutter]) menu to [BALANCE] or [RELEASE], you will be able to take a picture even when the subject is not in focus.
3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. Front Dial ( )/Rear Dial ( A Front dial (l 61) B Rear dial (l 61) C Control dial (l 62) D Cursor buttons (l 62) E [MENU/SET] button (l 62) F Joystick (l 63) G Touch screen (l 64) ) Rotate: Selects an item or numeric value.
3. Basic Operations Control Dial ( ) Rotate: Selects an item or numeric value. Cursor Buttons (3421) Press: Selects an item or numeric value. [MENU/SET] Button ( ) Press: Confirms a setting. 0 Displays the menu during recording and playback.
3. Basic Operations Joystick (3421/ ) The joystick can be operated in 4 directions by tilting it up, down, left and right and by pressing the center part. A Tilt: Selects an item or numeric value, or moves a position. 0 Place your finger on the center of the joystick before tilting. The joystick may not work as expected when the sides are pressed. B Press: Confirms a setting.
3. Basic Operations Touch Screen Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen. A Touch Operation of touching and then lifting your finger from the touch screen. B Drag Operation of moving a finger while it touches the touch screen. C Pinch (widen/narrow) Operations of widening the distance between two fingers (pinch out) and narrowing the distance between two fingers (pinch in) while they are touching the touch screen.
3. Basic Operations Monitor/Viewfinder Display Settings Setting the Viewfinder Adjusting the Viewfinder Diopter Rotate the diopter adjustment dial while looking through the viewfinder. 0 Adjust until you can clearly see the text on the viewfinder.
3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor A works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] button B. Press [LVF].
3. Basic Operations Switching the Display Information Press [DISP.]. ≥ The display information is switched.
3. Basic Operations 0 Press [ ] to switch between display/hide of the level gauge. This can also be set by using [Level Gauge]. (l 391) 0 Control panel operation (l 71) 0 You can hide the control panel and black screen: [ ]¨[ ] ¨ [Show/Hide Monitor Layout] (l 391) 0 The display can be changed so that live view and display information do not overlap: [ ]¨[ ] ¨ [LVF/Monitor Disp. Set] (l 387) Playback Screen Detailed information display¢1 With information 2020.12.
3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. 1 Display the Quick menu. 2 Select a menu item. 3 4 ≥Press [Q]. ≥Press 3421. ≥Selection is also possible by rotating . ≥Selection is also possible by touching a menu item. ISO AWB AUTO 0 0 0 0 0 0 3:2 Select a setting item. ≥Rotate or .
3. Basic Operations 0 Some items cannot be set depending on the recording mode or camera settings. 0 The Quick menu can be customized: [ 70 ]¨[ ] ¨ [Q.
3. Basic Operations Control Panel This screen allows you to view the current recording settings on the monitor. You can also touch the screen to change the settings. 1 Display the control panel. ≥Press [DISP.] several times. ISO AUTO AFS AWB 2 Touch the items. 3 Change the setting. 0 0 0 FINE 3:2 Fn 999 999 ≥The setting screens for each of the items are displayed. Example) Changing the AF mode ≥Touch the setting item.
3. Basic Operations Changing Directly Using the Dial 2 4 Steps to can also be changed using the following operations. 1 Press one of 3421 to enable selection of items. 0 Selected items are displayed in yellow. 2 Press 3421 to select an item. 0 Selection is also possible by rotating or . 3 Rotate values. to change the settings ISO AUTO AFS 0 0 FINE AWB ISO AUTO AFS 0 0 FINE AWB 0 Some items cannot be set depending on the recording mode or camera settings.
3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customizations. Menu operations can be performed using the cursors, joystick, dial, or by touch. Configuration and operation parts of the menu The menu can be operated by pressing 21 to move between menu screens.
3. Basic Operations 2 Select a main tab. 3 Select a sub tab. ≥Press 34 to select a main tab and then press 1. ≥You can also perform the same operation by rotating to select the main tab and then pressing or . ≥Press 34 to select a sub tab and then press 1. ≥You can also perform the same operation by rotating to select the sub tab and then pressing or . 0 If there are page tabs A, then after the page tabs have finished switching, the next sub tab is switched to. 4 74 Select a menu item.
3. Basic Operations 5 6 Select a setting item and then confirm your selection. ≥Press 34 to select a setting item and then press or . ≥You can also perform the same operation by rotating to select the setting item and then pressing or . Close the menu. ≥Press the shutter button halfway. ≥You can also close the menu by pressing [ ] several times. 0 For details about menu items, refer to Menu Guide. (l 344) Displaying Descriptions About Menu Items and Settings If you press [DISP.
3. Basic Operations Grayed Out Menu Items Menu items that cannot be set are displayed grayed out. If you press or while a grayed out menu item is selected, the reason why it cannot be set is displayed. 0 The reason why a menu item cannot be set may not be displayed depending on the menu item.
3. Basic Operations Intelligent Auto Mode The [iA] mode (Intelligent Auto mode) can record images using settings automatically selected by the camera. The camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions. 1 Set the mode dial to [iA]. 2 Aim the camera at the subject. 3 Adjust the focus. ≥When the camera detects the scene, the recording mode icon changes. (Automatic Scene Detection) ≥Press the shutter button halfway.
3. Basic Operations 4 Start recording. ≥Press the shutter button fully. 0 Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight. Types of Automatic Scene Detection : Scenes detected during picture taking : Scenes detected during video recording : i-Portrait : i-Portrait & Animal¢1 : i-Scenery : i-Macro : i-Night Portrait¢2 : i-Night Scenery : i-Food : i-Sunset : i-Low Light : ¢1 Detected when animal detection is enabled.
3. Basic Operations 0 If none of the scenes are applicable, recording is with [ ] (standard setting). 0 Different scene types may be selected for the same subject depending on the recording conditions. AF Mode Changing the AF mode. 0 Each press of [ ] changes the AF mode. [ ]/[ ] ([Face/Eye/ Body/Animal Detect.]) [ ] ([Tracking]) The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and the body of animals, and adjusts the focus.
3. Basic Operations Recording Using Touch Functions Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377) 1 2 Touch [ ]. Touch the icon. ≥The icon switches each time you touch it. (Touch AF) (Touch Shutter) Focus on the touched position. Record with focus on the point touched.
3. Basic Operations 0 When the Touch Shutter fails, the AF area first turns red and then disappears. 0 Refer to “Operations on the AF area movement screen” on page 104 for information about operations to move the AF area. 0 It is also possible to optimize the focus and brightness on the touched position: [ ]¨[ ] ¨ [Touch Settings] ¨ [Touch AF] ¨ [AF+AE] (l 116) Touch AE This function adjusts the brightness according to a touched position.
3. Basic Operations 3 Touch the subject to which you wish to adjust the brightness. 0 To return the position to which to adjust 4 the brightness to the center, touch [Reset]. ュリヴヱハ 5HVHW 6HW Touch [Set]. How to Disable Touch AE Touch [ ]. 0 When the following function is being used, Touch AE is not available: – [Live Cropping] 0 You can also adjust both the focus and brightness to those of the position you touch.
4. Image Recording [Aspect Ratio] You can select the image aspect ratio.
4.
4. Image Recording [Picture Size] Sets the picture’s image size. The image size varies depending on the [Aspect Ratio] or the lens used. When an APS-C lens is used, the image area switches to the one for APS-C, thereby narrowing the angle of view. ¨[ ]¨[ [Aspect Ratio] [4:3] [3:2] [16:9] ] ¨ Select [Picture Size] [Picture Size] When using full-frame lenses When using APS-C lenses [L] (21.5M) 5328k4000 [L] (9.5M) 3536k2656 [M] (10.5M) 3792k2848 [M] (5M) 2560k1920 1840k1376 [S] (5.
4. Image Recording [Picture Quality] Set the compression rate used for storing pictures. ¨[ ]¨[ Setting ] ¨ Select [Picture Quality] File format [FINE] [STD.] [RAWiFINE] [RAWiSTD.] [RAW] 86 Settings details JPEG images that give priority to image quality. JPEG RAWiJPEG RAW JPEG images of standard image quality. This is useful for increasing the number of recordable pictures without changing the picture size. This records RAW and JPEG images ([FINE] or [STD.]) simultaneously.
4. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. 0 You can process RAW images on the camera. (l 312) 0 Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to process and edit RAW files on a PC. (l 482) 0 Pictures taken with [RAW] cannot be displayed enlarged to the maximum magnification during playback.
4. Image Recording [Double Card Slot Function] This sets the way recording to the card slots 1 and 2 is performed. ¨[ [Recording Method] ]¨[ ] ¨ Select [Double Card Slot Function] [Relay Rec] Selects the priority of card slots for recording. [Destination Card Slot]: [ ]/[ ] Relays recording to the card in the other card slot after the first card runs out of free space. [Backup Rec] Records the same images to both cards simultaneously.
4. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.
4. Image Recording 0 Each folder can store up to 1000 files. 0 File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned. 0 In the following cases, a new folder with an incremented folder number will be created automatically when the next file is saved: – The number of files in the current folder reaches 1000. – The file number reaches 9999.
4. Image Recording [File Number Reset] Refresh the folder number to reset the file number to 0001. ¨[ ]¨[ ] ¨ Select [File Number Reset] Settings: [Card Slot 1]/[Card Slot 2] 0 When the folder number reaches 999, the file number cannot be reset. We recommend backing up your data and formatting the card. 0 To reset the folder number to 100: 1 Perform [Card Format] to format the card. (l 48) 2 Perform [File Number Reset] to reset the file number. 3 Select [Yes] on the folder number reset screen.
5. Focus/Zoom Smoother focusing is possible by selecting the focus mode and AF mode most suited to the recording conditions and the subject. It is also possible to customize the AF tracking features with [AFC]. Select the focus mode. [AFS] 0 [AF Custom Setting(Photo)] (l 98) [AFC] [MF] l 93 l 120 Select the AF mode. AFS AFC These focus on the subject the camera automatically selected. AFS ヤヒ ヤビ AFC These focus on the specified AF area.
5. Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the focus mode lever. [S] ([AFS]) This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses once. The focus stays locked while the shutter button is pressed halfway. [C] ([AFC]) This is suitable for recording moving subjects.
5. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. 1 Set the focus mode to [S] or [C]. ≥Set the focus mode lever. (l 93) 2 Select the AF mode. ≥Press [ ] to display the AF mode selection screen, and set using or . (l 100) ≥Selection is also possible by pressing [ ]. 0 In [iA] mode, each press of [ 3 Press the shutter button halfway. ≥The AF operates. 94 ] switches between [ ] and [ ].
5. Focus/Zoom Focus In focus Not in focus Focus icon A Lights Blinking AF area B Green Red AF beep Two beeps — Low illumination AF 0 In dark environments, low illumination AF automatically operates, and the focus icon is indicated as [ LOW ]. 0 Achieving focus may take more time than usual. Starlight AF 0 If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated.
5. Focus/Zoom Subjects and recording conditions that make focusing difficult with AF mode – Fast-moving subjects – Extremely bright subjects – Subjects without contrast – Subjects recorded through windows – Subjects near shiny objects – Subjects in very dark locations – When recording subjects both distant and near 0 You can change the operation of AF-ON so that AF prioritizes subjects close by.
5. Focus/Zoom Magnify the AF Area Position ([AF-Point Scope]) This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In other AF modes, the center of the screen is magnified.) You can check focus and observe an enlarged subject as with a telephoto lens. 1 Register [AF-Point Scope] to the Fn button. (l 321) 2 Enlarge the AF area position by pressing and holding the Fn button. 0 When the screen is enlarged, pressing the shutter button halfway re-acquires focus in a small central AF area.
5. Focus/Zoom [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene. Each of these features can be further customized. 1 2 Set the focus mode to [AFC]. (l 93) Set [AF Custom Setting(Photo)]. ≥ ¨[ ]¨[ Setting(Photo)] ] ¨ [AF Custom [Set 1] Basic general-purpose setting. [Set 2] Suggested for situations where the subject moves at a constant speed in one direction.
5. Focus/Zoom Adjusting AF Custom Settings 1 Press 21 to select the AF Custom setting type. 2 Press 34 to select items and press 21 to adjust. 0 To reset settings to the default, press [DISP.]. or . 3 Press Sets the tracking sensitivity for the movement of subjects. [i] When the distance to the subject changes drastically, the camera re-adjusts the focus immediately. You can bring different subjects into focus one after another.
5. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. 1 Press [ 2 Select the AF mode. ]. ≥The AF mode selection screen appears. ≥Press 21 to select an item and then press or . ≥Selection is also possible by pressing [ ]. ヤヒ ヤビ ヤピ [Face/Eye/Body/ Animal Detect.] l 102 [Tracking] l 105 [225-Area] l 107 [Zone (Vert./ Horz.
5. Focus/Zoom 0 When the following functions are being used, [ ] is not available: – [Time Lapse Shot] – [Live View Composite] 0 When the focus mode is set to [AFC], [ ] is not available. 0 When the following function is being used, the AF mode is fixed to [ ] (face detection): – [Live Cropping] 0 When the following functions are being used, the AF mode is fixed to [ ]: – [65:24]/[2:1] ([Aspect Ratio]) – [Miniature Effect] ([Filter Settings]) 0 The AF mode cannot be set when using Post-Focus.
5. Focus/Zoom [Face/Eye/Body/Animal Detect.] The camera detects a person’s face, eyes, and body (entire body or upper half of the body) and adjusts the focus. When animal detection is enabled, animals, such as birds, canines (including wolves), and felines (including lions) will also be detected. When the camera detects a person’s face A/B or body or an animal’s body C, an AF area is displayed. Yellow AF area to be brought into focus. The camera selects this automatically.
5. Focus/Zoom Enable/Disable Animal Detection 1 Press [ 2 Select [ ] to display the AF mode selection screen. ] and then press 3. 0 This enables animal detection, and the icon changes to [ 0 Press 3 again to disable animal detection. ]. Specify the Person, Animal, or Eye to Bring into Focus When the person or animal to be brought into focus is shown using the white AF area, you can change this to a yellow AF area.
5. Focus/Zoom Move and Change the Size of the Yellow AF Area You can move the yellow AF area to the position of the white AF area and replace the white AF area with the yellow AF area. If moving to a position outside an AF area, then the [ ] AF area will be set. 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. , or to change the size of the AF area. 5 Press .
5. Focus/Zoom [Tracking] When the focus mode is set to [AFC], the AF area follows the movement of the subject, maintaining focusing. Start tracking. ≥ Aim the AF area over the subject, and press the shutter button halfway. The camera will track the subject while the shutter button is pressed halfway or pressed fully. 0 If tracking fails, the AF area blinks red. 0 When set to [AFS], the focus will be on the AF area position. Tracking will not work.
5. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 You can also move the AF area by touching. 0 To return the position back to the center, press [DISP.]. 4 Press .
5. Focus/Zoom [225-Area] The camera selects the most optimal AF area to focus from 225 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. When the focus mode is set to [AFC], ensuring that the subject stays within the 225 areas during recording will ensure the subject stays in focus. Specify the [AFC] Start Point When the focus mode is set to [AFC], you can specify at which area to start [AFC]. 1 Set the focus mode to [AFC].
5. Focus/Zoom [Zone (Vert./ Horz.)]/ (Oval)] [Zone (Square)]/ [Zone [Zone (Vert./ Horz.)] Within the 225 AF areas, vertical and horizontal zones can be focused. Horizontal pattern Vertical pattern [Zone (Square)] Within the 225 AF areas, a central square zone can be focused. [Zone (Oval)] Within the 225 AF areas, a central oval zone can be focused. 0[ ] is not displayed with default settings. Set [Zone (Square)] to [ON] in [Show/Hide AF Mode] in the [Custom] ([Focus/Shutter]) menu.
5. Focus/Zoom Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ], [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. 0 You can also move the AF area by touching. ≥When [ ] is selected – Press 34 to switch to a horizontal pattern AF area. – Press 21 to switch to a vertical pattern AF area. 4 Rotate , or to change the size of the AF area. 0 You can also pinch out/pinch in the AF area to change the size.
5. Focus/Zoom [1-Area+]/ [1-Area] [1-Area+] Emphasis within a single AF area can be focused. Even when the subject moves out of the single AF area, the subject remains focused in a supplementary AF area (A). 0 Effective when recording moving subjects that are difficult to track with [ ]. [1-Area] Specify the point to be brought into focus.
5. Focus/Zoom Move and Change the Size of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] or [ ] and then press 4. 3 Press 3421 to move the position of the AF area. , or size of the AF area. 5 Press . 4 Rotate to change the 0 Refer to “Operations on the AF area movement screen” on page 104 for information about detailed operations to move the AF area.
5. Focus/Zoom Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen. 2 Select [ ] and then press 4. 3 Press 3421 to set the position of [i] and then press or 0 The selected position on the screen will be enlarged. 0 The AF area cannot be moved to the edge of the screen. 4 Press 3421 to fine-adjust the position of [i]. 5 Press or .
5. Focus/Zoom 0 When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3k to 6k; when the picture is displayed in full screen, you can enlarge the picture by approx. 3k to 10k. 0 You can also take a picture by touching [ ].
5. Focus/Zoom 3 Select the AF area. ≥Touch operation Touch the area to make the AF area. 0 To select consecutive points, drag the screen. 0 To cancel selection of the selected AF area, touch it again. ≥Button operation Press 3421 to select the AF area and then set with (Repeat this) or 0 To cancel selection of the selected AF area, press 0 To cancel all selections, press [DISP.]. 4 Press [Q]. or . again. Move the Position of the AF Area 1 Press [ ] to display the AF mode selection screen.
5. Focus/Zoom AF Area Movement Operation In default settings, you can use the joystick to directly move and change the size of the AF area when recording. 1 Move the position of the AF area. ≥On the recording screen, tilt the joystick. 0 Pressing 2 enables switching between the default and set AF area positions. In [ ]/[ ], this operation switches the person, animal or eye to be brought into focus. In [ ], this operation displays the enlarged screen. Change the size of the AF area. ≥Rotate , or .
5. Focus/Zoom 3 Confirm your selection. ≥Press the shutter button halfway. ≥This will return you to the recording screen. 0 When [Metering Mode] is [ ], the metering target also moves together with the AF area. 0 In [ ], [ ], [ ], and [ ヤヒ ] to [ ヤピ ], the size of the AF area cannot be changed. 0 In [ ], it is not possible to move the AF area or change its size. 0 In the [iA] mode, the [ ]/[ ] AF area cannot be moved.
5. Focus/Zoom Focus on the Touched Position ([AF]) 1 Touch the subject. 0 The AF area moves to the touched position. 2 Pinch out/pinch in to change the AF area size. 0 The first touch of [Reset] returns the AF area position to the center. The second touch returns the size of the AF area to the default. 3 Touch [Set]. ], touch [Exit]. 0 In [ 0 For [ ]/[ ], the AF area setting is canceled if you touch [ ] on the recording screen.
5. Focus/Zoom Moving the AF Area Position with the Touch Pad During viewfinder display, you can touch the monitor to change the position and size of the AF area. 1 2 Set [Touch Pad AF]. ≥ ¨[ ]¨[ ] ¨ [Touch Settings] ¨ [Touch Pad AF] ¨ [EXACT]/[OFFSET1] to [OFFSET7] Move the position of the AF area. ≥During viewfinder display, touch the monitor. 3 Change the size of the AF area. ≥Rotate , or . 0 Use for more detailed adjustments. 0 The first press of [DISP.
5. Focus/Zoom Setting Items ([Touch Pad AF]) [EXACT] Moves the AF area of the viewfinder by touching a desired position on the touch pad. Moves the AF area of the viewfinder according to the distance you drag [OFFSET1] your finger on the to touch pad. [OFFSET7] Select the range to be detected with the drag operation.
5. Focus/Zoom Record Using MF MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF. 1 2 Set the focus mode lever to [MF]. Select the focus point. ≥Tilt the joystick to select the focus point. 0 To return the point to be brought into focus to the center, press [DISP.]. 3 120 Confirm your selection. ≥Press .
5. Focus/Zoom 4 Adjust the focus. ≥Rotate the focus ring. A MF Assist (enlarged screen) 0 This will display the in-focus portion highlighted with color. (Focus Peaking B) 0 A recording distance guideline is displayed. (MF Guide C) D Indicator for ¶ (infinity) (m)∞10 5 3 2 1.5 1 0.5 0.1 AF 5 Close the MF Assist screen. 6 Start recording. ≥Press the shutter button halfway. ≥This operation can also be performed by pressing . ≥Press the shutter button fully.
5. Focus/Zoom Operations on the MF Assist Screen Button operation 3421 Touch operation Drag Pinch out/ pinch in s Description of operation Moves the enlarged display position. Enlarges/reduces the screen in small steps. Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). [DISP.] [Reset] [AF ON] AF First time: Returns the MF Assist position to the center. Second time: Returns the MF Assist magnification to the default setting. The AF operates.
5. Focus/Zoom 0 On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a short time after you cease the operation. 0 You can also display the MF Assist screen by pressing the [ ]. 0 During MF, pressing [AF ON] will activate AF. 0 The recording distance reference mark indicates the position of the imaging surface. This becomes the reference when measuring the recording distance.
5. Focus/Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. When taking pictures, use [Ex. Tele Conv.] to increase a telescopic effect without image deterioration. When recording videos, use [Image Area of Video] to obtain the same telescopic effect as [Ex. Tele Conv.]. 0 For details about [Image Area of Video], refer to page 249. Rotate the zoom ring. T: Telephoto W: Wide-angle ≥ Rotating the zoom ring displays the focal length on the recording screen.
5. Focus/Zoom Extended Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. 0 The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] set in the [Photo] ([Image Quality]) menu. – Set to [ M]: 1.4k – Set to [ S]: 2.0k (1.9k when using APS-C lenses) 1 Set [Picture Size] to [M] or [S]. 2 Set [Ex. Tele Conv.].
5. Focus/Zoom Changing the Zoom Magnification Button operation 1 Set [Ex. Tele Conv.] to [ZOOM]. ¨[ 0 ]¨[ ] ¨ [Ex. Tele Conv.] ¨ [ZOOM] 2 Set the Fn button to [Zoom Control]. (l 321) 3 Press the Fn button. 4 Press the cursor buttons to operate the zoom. EXS 31: T (telephoto) 24: W (wide-angle) 0 Press the Fn button again, or wait a EX1.8x specified time to end zoom operation. A Zoom magnification Touch operation 0 With the default settings, the Touch Tab is not displayed.
5. Focus/Zoom 4 Drag the slide bar to operate the zoom. T: Telephoto W: Wide-angle 0 To end Touch Zoom operations, touch [ ] again. 0 When displaying the [Ex. Tele Conv.] setting screen using the Fn button, pressing [DISP.] allows you to change the [Picture Size] setting. 0 When the following functions are being used, [Ex. Tele Conv.
6. Drive/Shutter/Image Stabilizer Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Rotating the drive mode dial. [ [ ] ]/[ ] Single Takes one picture each time the shutter button is pressed. Burst (l 129, 133) Takes pictures continuously while the shutter button is pressed and held. 6K/4K photo recording is also possible. Takes pictures with Time Lapse Shot or Stop Motion Animation.
6. Drive/Shutter/Image Stabilizer Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. You can choose a burst setting which enables burst recording in high image quality, [H], [M] or [L], or one which enables high-speed burst recording, [ ] (6K/4K photo), to suit the recording conditions. 1 Set the drive mode dial to [ ] (Burst Shot 1) or [ ] (Burst Shot 2). 0 Configure the burst settings for each of [ 2 ] and [ ]. Select the burst rate.
6.
6. Drive/Shutter/Image Stabilizer Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen. ISO100 r20 Example) When 20 frames: [r20] 0 Once recording starts, the number of pictures that can be taken continuously will decrease. When [r0] appears, the burst rate decreases. 0 When [r99i] is displayed on the recording screen, you can take 100 or more burst pictures.
6. Drive/Shutter/Image Stabilizer Exposure when Taking Burst Pictures Focus mode [H] [AFS] Fixed to the exposure of the first frame [AFC] The exposure is adjusted for each frame [MF] Fixed to the exposure of the first frame [M]/[L] The exposure is adjusted for each frame 0 It may take a while to save burst pictures. If you continue to take burst pictures while saving is in progress, the maximum number of frames recordable will be reduced.
6. Drive/Shutter/Image Stabilizer 6K/4K Photo Recording With 6K Photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 18 million pixels, extracted from their burst file. With 4K photo, you can take high-speed burst pictures at 60 frames/ second and save the desired pictures, each made up of approx. 8 million pixels.
6. Drive/Shutter/Image Stabilizer 3 Select [Picture Size / Burst Speed]. ≥ ¨[ ]¨[ ] ¨ [6K/4K PHOTO] ¨ [Picture Size / Burst Speed] Picture size [6K 18M] [4K H 8M] [4K 8M] 4 Burst rate [Rec Quality]¢ [4:3]: [3:2]: 4992k3744 5184k3456 30 frames/ second [6K/200M/30p] [4:3]: [3:2]: [16:9]: [1:1]: 3328k2496 3504k2336 3840k2160 2880k2880 60 frames/ second [4K/150M/60p] 30 frames/ second [4K/100M/30p] ¢ Saved as 6K/4K burst files whose [Rec. File Format] is [MP4]. Select [Rec Method].
6. Drive/Shutter/Image Stabilizer [ ][ ][ ] ([6K/4K Burst(S/S)]) “S/S” is an abbreviation for start/stop. When you wish to capture an unpredictable photo opportunity Starts taking burst pictures when the shutter button is pressed. Pressing the button again stops taking burst pictures. The start tone and stop tone are output. Audio recording: Available¢ [ ][ ][ ] ([6K/4K Pre-Burst]) When you wish to capture at the moment of a photo opportunity Takes burst pictures for approx.
6. Drive/Shutter/Image Stabilizer [6K/4K Burst(S/S)] 1 2 Press the shutter button fully to start recording. Press the shutter button fully again to stop recording. C Start (First) D Stop (Second) E Recording is performed 0 You can add markers by pressing [Q] during recording. (Up to 40 markers per recording) This allows you to skip to the positions where you added markers when selecting pictures from a 6K/4K burst file. [6K/4K Pre-Burst] Press the shutter button fully. F Approx.
6. Drive/Shutter/Image Stabilizer [Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)]) The camera starts recording approx. 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity. ¨[ ]¨[ ] ¨ [6K/4K PHOTO] ¨ Select [Pre-Burst Recording] Settings: [ON]/[OFF] 0 When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording screen.
6. Drive/Shutter/Image Stabilizer 0 With 6K/4K photo recording, the following functions are not available: – Flash – [Bracketing] – Program Shift – AF mode ( ) – [MF Assist] ([6K/4K Pre-Burst] only) 0 When you record in an extremely bright location or under lighting such as fluorescent or LED lighting, the coloring or brightness of the image may change or horizontal stripes may appear on the screen. Lowering the shutter speed may reduce the effect of horizontal stripes.
6. Drive/Shutter/Image Stabilizer Selecting Pictures from a 6K/4K Burst File You can select pictures from the 6K/4K burst files and save them. 0 When continuing to select pictures from the Auto Review after recording 6K/4K photos, start the operation from either Step or . 2 3 1 Select a 6K/4K burst file on the playback screen. (l 300) ≥Select an image with the [ ] or [ ] icon and then press 3. ≥You can also perform the same operation by touching [ ] or [ ].
6. Drive/Shutter/Image Stabilizer 4 Save the picture. ≥Touch [ ] or [ ]. ≥A confirmation screen appears. 0 The picture is saved in JPEG format ([FINE] picture quality). 0 The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
6. Drive/Shutter/Image Stabilizer Reducing Noise Caused by High Sensitivity ([6K/4K PHOTO Noise Reduction]) When saving pictures, reduce the noise that occurs due to high ISO sensitivity. ¨[ ]¨[ ] ¨ Select [6K/4K PHOTO Noise Reduction] Settings: [AUTO]/[OFF] 0 This is not applied to pictures saved with [6K/4K PHOTO Bulk Saving].
6. Drive/Shutter/Image Stabilizer Button operation Touch operation Description of operation Selects a frame. / 21/ Drag/ 0 To change the frames displayed in the picture selection slide view, select the frame at the left/ right end and then touch [ ] or [ ]. 21 Press and hold s Continuously rewinds or forwards Touch and hold frame-by-frame. Touch/drag Pinch out/ pinch in / s 3421 Drag [ Enlarges or reduces the display.
6. Drive/Shutter/Image Stabilizer 6K/4K Burst Playback Screen Operations While paused During continuous playback Button operation Touch operation Description of operation 3 s Performs continuous playback or pauses (during continuous playback). 4 s Performs continuous rewind playback or pauses (during continuous rewind playback). 1/ / s Performs fast-forward playback or performs frame-by-frame forwarding (while paused).
6. Drive/Shutter/Image Stabilizer Displays the in-focus portion highlighted with color ([Focus Peaking]). 0 [ON]/[OFF] switches. s / / Saves the picture (while paused). 0 During marker operation, you can skip to set markers or the beginning or end of the 6K/4K burst file. Touch [ ] to return to the previous operation. Button operation Touch operation 1 s Moves to the next marker. 2 s Moves to the previous marker.
6. Drive/Shutter/Image Stabilizer Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video. 0 Check that the clock is set correctly. (l 54) 0 For long recording intervals, we recommend setting [Lens Focus Resume] to [ON] in the [Custom] ([Lens / Others]) menu.
6. Drive/Shutter/Image Stabilizer 3 Set the recording settings. [Mode] Switches between Time Lapse Shot and Stop Motion Animation. [Shooting Interval Setting] [Start Time] [ON] Sets the interval before the next recording takes place. [OFF] Takes pictures without leaving recording intervals. [Now] Starts recording when the shutter button is pressed fully. [Start Time Set] [Image Count]/ [Shooting Interval] [Exposure Leveling] Starts recording at the set time.
6. Drive/Shutter/Image Stabilizer 6 Create a video. (l 152) 0 After the recording has stopped, select [Yes] on the confirmation screen to proceed to create a video. Even if you select [No], you can still create a video with [Time Lapse Video] in the [Playback] ([Process Image]) menu. (l 410) Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera.
6. Drive/Shutter/Image Stabilizer 0 Pictures recorded to more than one card cannot be combined into a single video. 0 Pictures taken with [HLG Photo] cannot be converted to videos. 0 The camera gives priority to achieving the standard exposure, so it may not take pictures at the set interval or take the set number of pictures. Furthermore, it may not end at the end time displayed on the screen. 0 Time Lapse Shot is paused in the following cases.
6. Drive/Shutter/Image Stabilizer Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. 1 2 Set the drive mode dial to [ ]. Set [Mode] to [Stop Motion Animation]. ≥ 3 ¨[ ]¨[ ] ¨ [Time Lapse/Animation] ¨ [Mode] ¨ [Stop Motion Animation] Set the recording settings. [Mode] [Add to Picture Group] Switches between Time Lapse Shot and Stop Motion Animation.
6. Drive/Shutter/Image Stabilizer 4 Close the menu. 5 Start recording. ≥Press the shutter button halfway. ≥Press the shutter button fully. ≥Take pictures repeatedly while moving the subject little by little. 0 The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. 0 You can play back the recorded stop motion images by pressing [(] during recording. Press [ ] to delete unnecessary images. To return to the recording screen, press [(] again.
6. Drive/Shutter/Image Stabilizer 0 Pictures taken with [HLG Photo] cannot be converted to videos. 0 Up to 9999 frames can be recorded. 0 If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on. Selecting [Yes] allows you to continue the recording from the interruption point. 0 The camera gives priority to achieving the standard exposure, so it may not take pictures at the set interval when the flash, etc. is used for recording.
6. Drive/Shutter/Image Stabilizer Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or stop motion recording, you can proceed to create a video. 0 Refer to the sections below about these recording functions. – Time Lapse Shot recording: l 145 – Stop motion recording: l 149 0 You can also create videos with [Time Lapse Video] (l 410) or [Stop Motion Video] (l 410) in the [Playback] menu. 1 Select [Yes] on the confirmation screen that appears after recording.
6. Drive/Shutter/Image Stabilizer 0 The [Rec Quality] setting returns to the default setting when the [Switch NTSC/PAL] setting is changed. 0 Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds.
6. Drive/Shutter/Image Stabilizer Recording Using the Self-timer 1 2 Set the drive mode dial to [ ]. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. 0 The focus and exposure are fixed when the shutter button is pressed halfway. 3 154 Start recording. ≥Press the shutter button fully. ≥The self-timer light blinks and then the shutter is released.
6. Drive/Shutter/Image Stabilizer Setting the Self-timer Time ¨[ ]¨[ ] ¨ Select [Self Timer] [ ] Takes a picture after 10 seconds. [ ] Takes 3 pictures at approx. 2 second intervals after 10 seconds. [ ] 0 This setting is a convenient way to avoid camera shake Takes a picture after 2 seconds. caused by pressing the shutter button. 0 We recommend using a tripod when recording with the self-timer.
6. Drive/Shutter/Image Stabilizer Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance (adjustment value or color temperature). 0 Aperture Bracket can be selected in the following modes: – [A] mode – [M] mode (when ISO sensitivity is set to [AUTO]) 0 White Balance Bracket (Color Temperature) can be selected when the white balance is set to [ 1 ], [ 2 ], [ 3 ], or [ 4 ].
6. Drive/Shutter/Image Stabilizer Setting Items ([Bracketing Type]) [ ] Exposure Bracket When the shutter button is pressed, the camera records while changing the exposure. (l 159) [ ] Aperture Bracket When the shutter button is pressed, the camera records while changing the aperture value. (l 159) [ ] Focus Bracket When the shutter button is pressed, the camera records while changing the focus point.
6. Drive/Shutter/Image Stabilizer 0 When [Aspect Ratio] is set to [65:24]/[2:1], only the Exposure Bracket can be used. 0 White Balance Bracket and White Balance Bracket (Color Temperature) are not available when using the following functions: – [iA] mode – Taking burst pictures – [RAWiFINE]/[RAWiSTD.
6. Drive/Shutter/Image Stabilizer [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Step] [Sequence] Sets the order in which images are recorded. [Single Shot Setting] [ ]: Takes only one image each time the shutter button is pressed. [ ]: Takes all of the set number of images when the shutter button is pressed once.
6. Drive/Shutter/Image Stabilizer [More Settings] (Focus Bracket) [Step] [Image Count] [Sequence] Sets the focus adjustment step. 0 The distance that the focus point is moved becomes shorter if the initial focus point is close, and longer if it is far away. Sets the image count. 0 This cannot be set when taking burst pictures. Burst pictures are taken while the shutter button is pressed.
6. Drive/Shutter/Image Stabilizer [More Settings] (White Balance Bracket) Rotate , or to set the correction step and then press G or . Rotate to the right: Horizontal direction ([A] - [B]) Rotate to the left: Vertical direction ([G] - [M]) 0 The correction step can also be set by touching [ ]/[ ]/[ ]/[ ]. A M [More Settings] (White Balance Bracket (Color Temperature)) Rotate , or to set the correction step and then press or .
6. Drive/Shutter/Image Stabilizer [Live View Composite] Images are recorded over several times and only the parts that change to become brighter form part of the composition. The images composed by recording at a set exposure time (shutter speed) are displayed, allowing the images to be confirmed as recording proceeds. This allows you to reduce the overall brightness for recording, so it is convenient for recording the light trails of stars or fireworks against a bright nightscape.
6. Drive/Shutter/Image Stabilizer 4 5 Decide on the composition and then fix the camera in place. Set the shutter speed and ISO sensitivity. ≥Rotate to set the shutter speed. ≥Press [ISO], then rotate , or to set the ISO sensitivity. 5” , 100 200 400 80 0 The shutter speed can be set in the range between 60 seconds and 1/1.6 of a second. 0 The ISO sensitivity can be set in the range between [100] and [3200] ([50] and [3200] when [Extended ISO] is set). 6 Get the image to use for noise reduction.
6. Drive/Shutter/Image Stabilizer 8 Stop recording. ≥Press the shutter button fully. 0 A maximum of 3 hours can be recorded with one Live View Composite recording. (Recording automatically ends when the time exceeds 3 hours.) 9 End [Live View Composite]. ≥Press [Q]. Setting Items ([Live View Composite]) [Start] [Shutter Delay] 164 Starts Live View Composite recording. Sets the delay time from when the shutter button is pressed until the shutter is released.
6. Drive/Shutter/Image Stabilizer 0 [Long Exposure NR] will be [ON]. 0 When recording with the flash, the flash fires only in the first frame. 0 Some menus are not displayed after getting the noise reduction image. 0 The image for noise reduction is discarded when you do the following. Do 6 Step again. – Modify the shutter speed/ISO sensitivity – Switch the playback mode 0 When pressing the shutter button fully to end recording, the last image may not be merged.
6. Drive/Shutter/Image Stabilizer Post-Focus Recording Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you merge images with multiple focus points. This function is suitable for subjects that do not move. Perform burst 6K/4K photo recording while automatically shifting the focus. Touch the desired focus point.
6. Drive/Shutter/Image Stabilizer 2 3 Close the menu. ≥Press the shutter button halfway. Decide on the composition and then adjust the focus. ≥Press the shutter button halfway. ≥AF detects the focus point on the screen. (Excluding the edges of the screen) 60 F3.5 ±0 ISO10 0 If no areas on the screen can be brought into focus, the focus icon A blinks and recording is not possible. 0 Maintain the same distance to the subject and the same composition until recording finishes. 4 Start recording.
6. Drive/Shutter/Image Stabilizer 0 Since recording is performed with the same image quality as 6K/4K photos, limitations apply to recording functions and menus. 0 Focus settings cannot be changed during Post-Focus recording. 0 When using APS-C lenses, [6K 18M] is not available.
6. Drive/Shutter/Image Stabilizer Selecting the Focus Point for the Picture to Save 1 Select a Post-Focus image on the playback screen. (l 300) ≥Select an image with the [ ] icon and then press 3. ≥You can also perform the same operation by touching the [ ] icon. 2 Touch the focus point. 0 When the point is in focus, a green frame appears. 0 If there is no picture with the selected 3 point in focus, a red frame appears. A picture cannot be saved. 0 The edge of the screen cannot be selected.
6. Drive/Shutter/Image Stabilizer Focus Point Selection Operations Button operation Touch operation 3421/ / Touch Description of operation Selects a focus position. 0 Selection is not possible during enlarged display. Enlarges the display. 0 During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing 21.) Reduces the display (during enlarged display). [ ] Switches to Focus Stacking operation.
6. Drive/Shutter/Image Stabilizer Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. A Focus: closer B Focus: more distant 1 On the screen for selecting the focus point in Step 2 on page 169, touch [ ]. ≥You can also perform the same operation by pressing [ ]. 2 Select the merging method. [Auto Merging] Automatically selects pictures suitable for merging and then merges them into a single picture.
6. Drive/Shutter/Image Stabilizer 3 (When [Range Merging] is selected) Touch the focus points. 6HW &DQFHO 0 Select at least two points. 4 172 Selected points are indicated with a green frame. 0 The in-focus range between the two selected points is displayed in green. 0 Ranges that cannot be selected are displayed in gray. 0 To cancel the selection, touch a point with a green frame again. 0 To select consecutive points, drag the screen. Save the picture. ≥Touch [ ].
6. Drive/Shutter/Image Stabilizer Operations when [Range Merging] Is Selected Button operation Touch operation 3421 / / / Touch [ ] Selects a point. [Set/Cancel] Sets or cancels a point. [All] Selects all points. (Before selecting points) [DISP.] [Reset] / Description of operation Cancels all selections. (After selecting points) Merges the pictures and saves the resulting picture.
6. Drive/Shutter/Image Stabilizer [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. 0 The following settings are fixed: – – – – – – [Flash Mode]: [Œ] (Forced Flash Off) [AF Assist Light]: [OFF] [Shutter Type]: [ELEC.
6. Drive/Shutter/Image Stabilizer [Shutter Type] Selects the shutter type to use for taking pictures. ¨[ ]¨[ [AUTO] [MECH.] [EFC] [ELEC.] [ELEC.+NR] Mechanism ] ¨ Select [Shutter Type] Switches the shutter type automatically depending on the recording conditions and shutter speed. Records with the mechanical shutter type. Records with the electronic front curtain type. Records with the electronic shutter type. Records with the electronic shutter type.
6. Drive/Shutter/Image Stabilizer 0 The electronic front curtain type reduces blur caused by the shutter because the amount of vibration from the shutter is small compared to the mechanical shutter type. 0 The electronic shutter type allows you to record without vibration from the shutter.
6. Drive/Shutter/Image Stabilizer Image Stabilizer This camera can use both the in-body image stabilizer and the in-lens image stabilizer. It is compatible with the Dual I.S.2 system that is an effective combination of the 2 image stabilizers. Furthermore, during video recording, you can use the 5-Axis Hybrid Image Stabilizer that incorporates electronic stabilization.
6. Drive/Shutter/Image Stabilizer Using the Image Stabilizer 0 When using a lens with an O.I.S. switch, set the switch on the lens to [ON]. 0 When using lenses without a function for communicating with this camera, a message asking you to check the focal length setting is displayed after you turn on the camera. Correctly operating the image stabilization function requires that the focal length be set to match the attached lens. Set the focal length in accordance as prompted by the message.
6. Drive/Shutter/Image Stabilizer Image Stabilizer Settings Set the image stabilizer operation to match the recording situation. ¨[ ]¨[ [Operation Mode] ] ¨ Select [Image Stabilizer] Sets the stabilization movement (blur) to match the recording method (normal, panning). (l 181) [ [Body(B.I.S.) / Lens(O.I.S.)] ] ([Body]) [ ] ([Lens + Body (Roll)]) The in-body image stabilizer corrects for vertical, horizontal, and rotational shake.
6. Drive/Shutter/Image Stabilizer [Anamorphic (Video)] You can switch to an image stabilizer that suits anamorphic recording. (l 182) [Focal Length Set] When using lenses without a function for communicating with this camera, manually set the focal length. (l 183) 0 When the following functions are being used, [When to Activate] is fixed to [ALWAYS]: –[ ] ([Body(B.I.S.) / Lens(O.I.S.
6. Drive/Shutter/Image Stabilizer [Operation Mode] Set the stabilization movement (blur) to match the recording method (normal, panning). [Normal] Corrects vertical, horizontal, and rotational camera shake. This function is suitable for normal recording. Automatically detects the panning direction, and corrects [Panning (Auto)] vertical and horizontal camera shake. This function is suitable for panning. [OFF] [Panning (Left/ Right)] Corrects vertical camera shake.
6. Drive/Shutter/Image Stabilizer [Boost I.S. (Video)] Increase the effectiveness of the image stabilizer during video recording. This effect can help provide a stable composition when you want to perform recording from a fixed perspective. Settings: [ON]/[OFF] 0 When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen. 0 To change composition while recording, first set this to [OFF] before moving the camera. To set this to [OFF] during recording, use the Fn button.
6. Drive/Shutter/Image Stabilizer [Focal Length Set] When using lenses without a function for communicating with this camera, manually set the focal length inscribed on the lens. Up to three focal length settings can be registered. Registered focal length settings can be called. Entering focal length input A Enter the focal length. 21: Select 34: Select a numeric value. or : Confirm 0 0.1 mm to 1000.0 mm can be set. Register the entered focal length. Call the registered focal length.
7. Metering/Exposure/ISO Sensitivity [Metering Mode] Type of optical measurement to measure brightness can be changed. ¨[ ]¨[ ] ¨ Select [Metering Mode] [ ] (Multi-metering) Method in which the most suitable exposure is measured by judging the allocation of brightness on the whole screen. [ ] (Center-weighted) Method used to perform measuring which focuses on the center of the screen. (Spot) Method used to measure the extremely small part around the spot-metering target A.
7. Metering/Exposure/ISO Sensitivity Program AE Mode In [P] mode (Program AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Program Shift to change combinations of shutter speed and aperture values while keeping the same exposure. 1 2 Set the mode dial to [P]. Press the shutter button halfway. ≥This displays the aperture value A and shutter speed value B on the recording screen.
7. Metering/Exposure/ISO Sensitivity Program Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed. 1 Press the shutter button halfway. 0 This displays the aperture value and shutter speed value on the recording screen. (Approx.
7. Metering/Exposure/ISO Sensitivity Aperture-Priority AE Mode In [A] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the background. It becomes easier to bring everything into focus including the background. 1 Set the mode dial to [A].
7. Metering/Exposure/ISO Sensitivity 2 Set the aperture value. 3 Start recording. ≥Rotate or . 0 If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. F8.
7. Metering/Exposure/ISO Sensitivity 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 195) You can set the preview of the aperture effect to constantly operate in [A] mode to check the depth of field while recording: [ ]¨[ ] ¨ [Constant Preview] (l 383) 0 The brightness of the recording screen and of actual recorded images may differ. Check the images on the playback screen.
7. Metering/Exposure/ISO Sensitivity Shutter-Priority AE Mode In [S] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion 1 190 Set the mode dial to [S].
7. Metering/Exposure/ISO Sensitivity 2 Set the shutter speed. 3 Start recording. ≥Rotate or . 0 If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. 250 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (l 195) 0 The brightness of the recording screen and of actual recorded images may differ.
7. Metering/Exposure/ISO Sensitivity Manual Exposure Mode In [M] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed. Exposure compensation can also be used when ISO sensitivity is set to [AUTO]. 1 2 3 Set the mode dial to [M]. Set the aperture value and shutter speed.
7. Metering/Exposure/ISO Sensitivity Available Shutter Speeds (Sec.) [MECH.] [B] (Bulb, max. approx. 30 minutes), 60 to 1/8000 [EFC] [B] (Bulb, max. approx. 30 minutes), 60 to 1/2000 [ELEC.] [B] (Bulb, max. approx. 60 seconds), 60 to 1/8000 0 The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview].
7. Metering/Exposure/ISO Sensitivity [B] (Bulb) If you set the shutter speed to [B] (Bulb), the shutter stays open while the shutter button is pressed fully. (up to approx. 30 minutes) The shutter closes when the shutter button is released. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky. 0 We recommend using a tripod or the Shutter Remote Control (DMW-RS2: optional) during bulb recording.
7. Metering/Exposure/ISO Sensitivity Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time. 0 You can also perform the same operation by pressing the Fn button registered with [Preview]. For information about the Fn button, refer to page 321. Press the preview button.
7. Metering/Exposure/ISO Sensitivity Exposure Compensation You can compensate the exposure when the standard exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of n5 EV. When recording videos or recording with 6K/4K photo or Post-Focus, the range changes to n3 EV. 1 2 Press [ ]. Compensate the exposure. ≥Rotate , , or 2 1 . 2 2 +1 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 3 196 Confirm your selection. ≥Press the shutter button halfway.
7. Metering/Exposure/ISO Sensitivity 0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. 0 When the exposure compensation value falls below or exceeds n3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen. 0 The set exposure compensation value is stored even if you turn off the camera.
7. Metering/Exposure/ISO Sensitivity Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example. 1 Register [AE LOCK], [AF LOCK], or [AF/AE LOCK] to the Fn button. (l 321) 0 These cannot be registered to [Fn3] to [Fn7]. 2 3 [AE LOCK] The exposure is locked.
7. Metering/Exposure/ISO Sensitivity ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 100 to 51200 in 1/3 EV increments. This camera supports Dual Native ISO which enables recording at high sensitivity and with reduced noise by switching the base sensitivity. The base sensitivity is automatically switched according to the brightness. 1 2 Press [ISO]. Select ISO sensitivity. 1 2 ≥Rotate , , or . ≥Selection is also possible by pressing [ISO].
7. Metering/Exposure/ISO Sensitivity Characteristics of the ISO Sensitivity By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur. However, higher ISO sensitivities also increase the amount of noise in the recorded images. Setting Items (ISO Sensitivity) [AUTO] The ISO sensitivity is automatically adjusted according to the brightness.
7. Metering/Exposure/ISO Sensitivity 0 When the following functions are being used, the ISO sensitivity that can be set is restricted.
8. White Balance/Image Quality White Balance (WB) White balance (WB) is a function that corrects the color cast produced by the light illuminating the subject. It corrects the colors so that white objects appear in white to make the overall color closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
8. White Balance/Image Quality 3 Confirm your selection. ≥Press the shutter button halfway.
8. White Balance/Image Quality 1 [AWB] will work within this range. 2 Blue sky 3 Cloudy sky (Rain) 4 Shade 5 Sunlight 6 White fluorescent light 7 Incandescent light bulb 8 Sunrise and sunset 9 Candlelight KlKelvin Color Temperature 0 Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type. Use [AWB], [AWBc], [AWBw] or [ 1 ] to [ 4 ]. 0 The white balance is fixed to [AWB] while [Filter Settings] is being used.
8. White Balance/Image Quality Registering the White Set ([ 1 ] to [ 4 ]) Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. 1 Press [WB] and then select any value from [ 1 ] to [ 4 ]. 2 Press 3. 3 Aim the camera at a white object so that it appears inside the frame at the center of the screen and then press or . 0 This will set the white balance and return you to the recording screen.
8. White Balance/Image Quality Adjusting the White Balance You can adjust the coloring even when the coloring you want to apply is not produced by the selected white balance. 1 2 3 Press [WB]. Select the white balance and then press 4. ≥The adjustment screen is displayed. Adjust the coloring. 2: 3: 1: 4: G [A] (AMBER: ORANGE) [G] (GREEN: GREENISH) [B] (BLUE: BLUISH) [M] (MAGENTA: REDDISH) A B M 0 You can also touch the graph to make adjustments. 0 Press [DISP.
8. White Balance/Image Quality 4 Confirm your selection. ≥Press the shutter button halfway. 0 When the white balance is adjusted, the color of its recording screen icon changes to the adjusted color. Adjusting toward the [G] side will display [i], while adjusting toward the [M] side will display [j].
8. White Balance/Image Quality [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. ¨[ 208 ]¨[ ] ¨ Select [Photo Style] [Standard] The standard setting. [Vivid] A setting that produces a more vivid quality with higher saturation and contrast. [Natural] A setting that produces a softer quality with lower contrast.
8. White Balance/Image Quality [Like709] A setting that minimizes overexposure by applying a gamma curve correction equivalent to Rec.709 to perform compression (knee adjustment) of high-luminance areas. 0 Rec.709 is an abbreviation of “ITU-R Recommendation BT.709”, a standard for high-definition broadcasting. [V-Log] Gamma curve setting intended for post-production processing. 0 It allows you to add rich gradation to images during post-production editing.
8. White Balance/Image Quality 0 In [iA] mode, operation differs from that in other recording modes. – [Standard] or [Monochrome] can be set. – The setting will be reset to [Standard] when the camera is switched to another recording mode or it is turned off. – Image quality cannot be adjusted.
8. White Balance/Image Quality Adjusting Image Quality 1 Press 21 to select the type of Photo Style. 2 Press 34 to select an item and then 6WDQGDUG press 21 to adjust. 0 Adjusted items are indicated with [¢]. 3 Press or . 0 When the image quality is adjusted, the Photo Style icon on the recording screen is indicated with [¢]. -5 0 +5 ±0 ±0 ±0 ±0 ±0 Settings Items (Image Quality Adjustment) [Contrast] Adjusts the contrast in the image. [Highlight] Adjusts the brightness of bright areas.
8. White Balance/Image Quality [Grain Effect] [Low]/ [Standard]/ [High] Sets the grain effect level. [Off] S s [Sharpness] Adjusts the outlines in the image. [Noise Reduction] 0 Increasing the effect may cause a slight drop in picture [Sensitivity]¢ Sets the ISO sensitivity. (l 199) [White Balance]¢ Sets the white balance. (l 202) 0 While [WB] is selected, press [ ] to display the white balance setting screen. Press [ ] again to return to the original screen.
8. White Balance/Image Quality 0 The items that you can adjust the image quality for depend on the Photo Style type. ([Saturation]) ([Color Tone]) S 3 3 s s 3 3 3 s s 3 3 3 s s 3 3 s 3 s s s 3 s s 3 3 s 3 s s s 3 s s 3 s 3 s s s 3 3 3 3 3 3 3 3 3 3 0 The effects of [Grain Effect] cannot be checked on the recording screen.
8. White Balance/Image Quality Registering Settings in My Photo Style 1 Press 21 to select the type of Photo Style. 2 Adjust the image quality. 0 My Photo Style displays the types of Photo Style at the top of image quality adjustment. Select the base Photo Style. 3 Press [DISP.]. 4 (When [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] is selected) Press 34 to select [Save Current Setting] and then press . or 5 Press 34 to select the registration destination number and then press or .
8. White Balance/Image Quality [Filter Settings] This mode records with additional image effects (filters). You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. 1 Set the [Filter Effect]. 2 Select the filter. ≥ ¨[ ]¨[ ] ¨ [Filter Settings] ¨ [Filter Effect] ¨ [SET] 1/8 ≥Press 34 to select, and then press or . ≥You can also select the image effect (filter) by touching the sample picture. 0 Press [DISP.
8.
8. White Balance/Image Quality Setting a Filter with Touch Operation 0 The default settings are for the Touch Tab to not be displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377) 1 Touch [ ]. EXPS 2 Touch the item to set. [ ]: Filter on/off [ ]: Filter [ ]: Filter effect adjustment EXPS 0 White balance will be fixed to [AWB] and the flash will be fixed to [Œ] (Forced Flash Off). 0 The upper limit to ISO sensitivity is [6400].
8. White Balance/Image Quality Setting the Type of Defocus ([Miniature Effect]) 1 Set [Filter Effect] to [Miniature Effect]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ]. 3 Press 34 or 21 to move the in-focus portion. 0 You can also move the in-focus portion by touching the screen. 0 You can also switch the defocus orientation by touching [ ]. 4 Rotate , or to change the size of in-focus portion.
8. White Balance/Image Quality Setting the Color to Be Left ([One Point Color]) 1 Set [Filter Effect] to [One Point Color]. 2 Press 3 to display the setting screen. 0 The setting screen can also be displayed by touching [ ] then [ ]. 3 Press 3421 to move the frame and select the color you want to leave. 0 You can also select the color you want to leave by touching the screen. 0 To return the frame back to the center, press [DISP.]. 4 Press or to set.
8. White Balance/Image Quality [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. ¨[ ]¨[ ] ¨ [Filter Settings] ¨ Select [Simultaneous Record w/ o Filter] Settings: [ON]/[OFF] 0 [Simultaneous Record w/o Filter] is not available when using the following functions: – Burst recording – [6K/4K PHOTO]/[Post-Focus] – [Time Lapse Shot] – [Stop Motion Animation] – [RAWiFINE]/[RAWiSTD.
8. White Balance/Image Quality [High Resolution Mode] This merges pictures with a high resolution from multiple recorded images. This function is suitable for recording subjects that do not move. The picture after merging can be saved in RAW or JPEG format. 0 Use a tripod to minimize camera shake. 0 The image stabilization function is automatically turned off. 1 Set [High Resolution Mode]. 2 Set the recording settings.
8. White Balance/Image Quality Set the compression rate at which the pictures are to be stored. [COMBINED]/[FINE]/[RAWiFINE]/[RAW] [Picture Quality] 0 When set to [COMBINED], recording is with the same settings as [Picture Quality] in the [Photo] ([Image Quality]) menu. (However, [STD.] changes to [FINE].) [Simul Record Normal Shot] Simultaneously takes pictures that are not merged when [ON] is set. The first picture will be saved with [Picture Size] set to [L].
8. White Balance/Image Quality 4 Decide on the composition and then fix the camera in place. 0 If blurring is detected, the High Resolution mode icon A blinks. 5 Start recording. ≥Press the shutter button fully. 0 With the default settings, [Shutter Delay] is activated, so there will be a gap in time from when the shutter button is pressed until the shutter is released. 0 The screen goes dark during recording. 0 The recording state indication (red) B blinks. Do not move the camera while it is blinking.
8. White Balance/Image Quality 0 In [High Resolution Mode], recording will be performed using the following settings: – [Shutter Type]: [ELEC.] (When [Long Exposure NR] is set to [OFF])/ [ELEC.
8. White Balance/Image Quality [HLG Photo] Records an HLG format picture with a wide dynamic range. Bright lights that are easily overexposed, and dark areas that are easily underexposed can be recorded showing fine quality and rich colors just as seen with the human eyes. Recorded pictures can be output over HDMI to devices (TV, etc.) that support HLG format pictures for viewing. Additionally, devices that support the HSP format can directly play back images.
8. White Balance/Image Quality 0 The monitor and viewfinder on this camera do not support display of HLG format images. In the [Custom] ([Monitor / Display (Video)]) menu, you can display the images converted for monitoring on the monitor/viewfinder of this camera with [Monitor] in [HLG View Assist]. (l 282) 0 HLG images appear darker on devices that do not support the HLG format.
9. Flash Using an External Flash (Optional) If you attach the Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to the hot shoe, you can record using the flash. Furthermore, by attaching an external flash that supports wireless flash recording, you can wirelessly control an external flash that is in a position separate from the camera. 0 Remove the lens hood to prevent vignetting. 0 Flash recording is not possible when the following functions are being used: – [6K/4K PHOTO]/[Post-Focus] – [ELEC.
9. Flash Notes on Flash Recording 0 Do not bring any object near the flash. Heat or light may cause the object to deform or discolor. 0 If you record repeatedly, time may be needed to charge the flash. While the flash is charging, images will be recorded without the flash firing. 0 When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached.
9. Flash Setting Flash You can set the flash function to control flash firing from the camera. [Flash Mode] Sets the flash mode. ¨[ Mode] (Forced Flash On) [‰] [ ] [ ]¨[ ] [ (Slow Sync.) ] [Œ] (Forced On/ Red-Eye) (Slow Sync./ Red-Eye) (Forced Flash Off) ] ¨ Select [Flash The flash fires every time regardless of the recording conditions. This is suitable for recording when there is backlighting or under lighting such as fluorescent lighting.
9. Flash 0 The flash fires twice. The interval between the first and second firings is longer when [ ] or [ ] is set. The subject should not move until the second firing has finished. 0[ ] and [ ] cannot be used when the following are set: – [Firing Mode]: [MANUAL] – [Flash Synchro]: [2ND] – [Wireless]: [ON] 0 Some flash modes may not be available depending on the settings on the external flash. 0 The effectiveness of red-eye reduction varies from person to person.
9. Flash Shutter Speeds for Flash Modes [Flash Mode] Shutter speed (sec.) [‰] [ [ [ 1/60¢1 to 1/250¢2 ] ] 1 to 1/200 ] ¢1 In [S] mode, this will be 60 seconds and in [M] mode it will be [B] (Bulb). ¢2 The maximum setting changes to 1/200 of a second in [P]/[A] modes. 0 The guide number decreases when the shutter speed is set to 1/250 of a second. [Red-Eye Removal] When [Flash Mode] is set to [ ] or [ ], the camera automatically detects red-eye and corrects image data.
9. Flash [Firing Mode]/[Manual Flash Adjust.] You can select whether to set the flash output automatically or manually. 0 The settings made here are enabled when some flashes from other manufacturers are attached. Set on the flash when a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) is attached. 1 2 232 Set the [Firing Mode]. ≥ ¨[ ]¨[ [Firing Mode] ]¨ [TTL] Sets flash output to be set automatically by the camera. [MANUAL] Sets the flash output manually.
9. Flash 3 Press 21 to set the flash output and then press or . 0 It can be set within the range of [1/1] (full flash output) to [1/128] in 1/3 steps. [Flash Adjust.] You can adjust the flash output when taking pictures with the flash in TTL output mode. 1 Select [Flash Adjust.]. ≥ 2 ¨[ ]¨[ [Flash Adjust.] ]¨ Press 21 to adjust the flash output and then press or . 0 It can be adjusted within the range of [j3 EV] to [i3 EV] in 1/3 EV steps. 0 [ ] is displayed on the recording screen.
9. Flash [Flash Synchro] When a moving subject is recorded at night using a slow shutter and flash, a trail of light may appear in front of the subject. If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light appearing behind the subject by firing the flash immediately before the shutter closes. ¨[ ]¨[ Synchro] [1ST] [2ND] ] ¨ Select [Flash This is the normal method for recording with the Flash.
9. Flash [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value. (l 196) ¨[ ]¨[ ] ¨ Select [Auto Exposure Comp.
9. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. Placing a Wireless Flash Place the wireless flash with its wireless sensor facing the camera.
9. Flash 1 2 Attach an external flash to the camera. (l 227) Set the wireless flashes to [RC] mode and then place them. 0 Set the channel and group for the wireless flashes. 3 Enable the wireless flash function of the camera. ≥ 4 ¨[ ¨ [ON] ]¨[ ] ¨ [Wireless] Set [Wireless Channel]. 0 Select the same channel as on the wireless flash side. 5 Set [Wireless Setup]. 0 Set the firing mode and flash output.
9. Flash Setting Items ([Wireless Setup]) 0 To fire a test flash, press [DISP.]. [External Flash]¢1 [A Group]/ [B Group]/ [C Group] [Firing Mode] [TTL]: The camera automatically sets the flash output. [AUTO]¢2: Sets the flash output on the external flash side. [MANUAL]: Sets the flash output of the external flash manually. [OFF]: The external flash outputs only communication light. [Flash Adjust.] Adjusts the flash output of the external flash manually when [Firing Mode] is set to [TTL].
9. Flash [Wireless FP] The external flash performs FP firing (repeated high-speed firing of the flash) during wireless recording, enabling recording using the Flash even at fast shutter speeds. ¨[ ]¨[ ] ¨ Select [Wireless FP] Settings: [ON]/[OFF] [Communication Light] Set the strength of communication light.
10. Recording Videos Recording Videos It is possible with this camera to record video in 2 recording file formats, MP4 and MOV, to a maximum resolution of 4K. It is also compatible with both the NTSC and PAL TV broadcast systems. [ ] mode (Creative Video mode) and [S&Q] mode (Slow & Quick mode) are recording modes specifically for video. In the [S&Q] mode, you can record smooth slow motion video and quick motion video by changing the frame rate. 1 Start recording. ≥Press the video rec. button.
10. Recording Videos Screen Displays While Video Recording The live view angle of view changes to the angle of view for video recording, and video recording time A and elapsed recording time B are displayed. 0 “h” is an abbreviation for hour, “m” for minute and “s” for second. 3s 0 The recording state indication C and card access indication D turn red while videos are 24m59s being recorded.
10. Recording Videos Size Interval for Dividing Files [Rec. File Format] [Rec Quality] Size interval for dividing files [FHD] A new file will be created to continue recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB. [4K] When using an SDHC memory card: A new file will be created to continue recording if the continuous recording time exceeds 30 minutes or the file size exceeds 4 GB.
10. Recording Videos 0 If an operation such as a zoom or button operation is performed during video recording, that operation sound may be recorded. 0 The lens operation sound (AF and image stabilizer) may be recorded to video. 0 If the operation sound of pressing the video rec. button to end recording bothers you, try the following: – Record the video about 3 seconds longer, and then divide the last part of the video using [Video Divide] in the [Playback] ([Edit Image]) menu.
10. Recording Videos Recording Modes Specifically for Video (Creative Video/S&Q) [ ] mode (Creative Video mode) and [S&Q] mode (Slow & Quick mode) are recording modes specifically for video. In the [S&Q] mode, you can record smooth slow motion video and quick motion video by changing the frame rate. In the recording modes specifically for video, you can start and stop video recording with the shutter button.
10. Recording Videos Setting the Exposure for Recording Videos 1 2 Set the mode dial to [ [S&Q]. ] or Set the exposure mode. ≥ ¨[ ]¨[ ] ¨ [Exposure Mode] ¨ [P]/[A]/[S]/[M] 0 You can perform the same exposure operations as the [P]/[A]/[S]/[M] modes. 3 Close the menu. 4 Start recording. 5 ≥Press the shutter button halfway. ≥Press the shutter button A or video rec. button B. Stop recording. ≥Press the shutter button or video rec. button again.
10. Recording Videos Operations During Video Recording You can change the exposure and other settings with touch operations to prevent operation sounds from being recorded. 0 With the default settings, the Touch Tab is not displayed. Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation]) menu. (l 377) 1 Touch [ ] or [ ]. 2 Touch an icon.
10. Recording Videos Separating Settings for Recording Video and Pictures In default settings, settings such as exposure and white balance changed in [ ]/[S&Q] mode are also reflected in picture recording in [P]/[A]/[S]/ [M] modes. From the [CreativeVideo Combined Set.] menu, you can separate settings for video recording and for picture recording. ¨[ ]¨[ ] ¨ Select [CreativeVideo Combined Set.] [F/SS/ISO/Exposure Comp.] [ ]: The recording settings are linked across recording modes.
10. Recording Videos Video Recording Settings This section describes the settings used when video recording. 0 In “4. Image Recording”, the functions described work with both pictures and video. Please also refer to that section. – [Double Card Slot Function]: l 88 – [Folder / File Settings]: l 89 – [File Number Reset]: l 91 [Switch NTSC/PAL] The image qualities you can select in [Rec Quality] are switched to the image qualities with the frame rate to suit the NTSC/PAL TV broadcast system.
10. Recording Videos [Rec. File Format] Sets the recording file format of videos to be recorded. ¨[ ]¨[ ] ¨ Select [Rec. File Format] [MP4] This file format is suitable for playback on PCs. [MOV] This file format is suitable for image editing. [Image Area of Video] Set the image area during video recording. The angle of view differs depending on the image area. Narrowing the image area allows you to achieve a telescopic effect without image deterioration.
10. Recording Videos 0 To check the image area in recording modes other than [ ]/[S&Q] mode, set [Photo/Video Preview] to [ ]. (l 388) 0 It is not possible to set to [FULL] in the following cases. – When a 4K/60p or 4K/50p [Rec Quality] is set – When set to [Anamorphic(4:3)] – When using APS-C lenses 0 When set to [Live Cropping], the setting is fixed to [FULL]. However, the setting is fixed to [APS-C] in the following case: – When a 60p or 50p [Rec Quality] is set Image area (Ex.
10. Recording Videos [Rec. File Format]: [MP4] 0 Audio format: AAC (2ch) A Recording frame rate B Bit rate (Mbps) C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [Switch NTSC/PAL]: [NTSC] [Rec Quality] Resolution YUV/bit A B C [4K/10bit/100M/60p]¢ 3840k2160 4:2:0/10 bit 59.94p 100 HEVC [4K/8bit/100M/30p] 3840k2160 4:2:0/8 bit 29.97p 100 AVC [4K/10bit/72M/30p]¢ 3840k2160 4:2:0/10 bit 29.97p 72 HEVC [4K/8bit/100M/24p] 3840k2160 4:2:0/8 bit 23.
10. Recording Videos [Rec. File Format]: [MOV] 0 Audio format: LPCM (2ch) A Recording frame rate B Bit rate (Mbps) C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [Switch NTSC/PAL]: [NTSC] [Rec Quality] Resolution YUV/bit A B C [4K/60p/420/10-L]¢ 3840k2160 4:2:0/10 bit 59.94p 200 HEVC [4K/60p/420/8-L]¢ 3840k2160 4:2:0/8 bit 59.94p 150 AVC [4K/30p/422/10-L]¢ 3840k2160 4:2:2/10 bit 29.97p 150 AVC [4K/30p/420/8-L] 3840k2160 4:2:0/8 bit 29.
10. Recording Videos 0 In this document, videos are indicated as follows according to their resolution: – 4K (3840k2160) video: 4K video – Full High Definition (1920k1080) video: FHD video 0 All videos will be recorded using Long GOP to compress the images. 0 Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, video recording time is shortened when a fast-moving subject is recorded.
10. Recording Videos Time Code When video is recorded in the MOV format, the hour, minute, seconds, and number of frames information (time code) is recorded automatically. The time code is used to synchronize multiple image and audio sources. 0 The time code is not recorded with video in the MP4 format. Setting the Time Code Sets the recording, display, and output of the time code. 1 Set [Rec. File Format] to [MOV]. ≥ 2 ¨[ ]¨[ Format] ¨ [MOV] Select [Time Code].
10. Recording Videos [Time Code Value] [Time Code Mode] [Reset] Sets to 00:00:00:00 (hour: minute: second: frame) [Manual Input] Manually input hour, minute, second and frame. [Current Time] Sets hour, minute and second to current time and sets frame to 00. [DF] Drop Frame. The camera modifies the difference between recorded time and time code. 0 Seconds and frames are separated by “.”. (Example: 00:00:00.00) [NDF] Non-Drop Frame. Records the time code without drop frame.
10. Recording Videos Using AF (Video) This section describes the use of AF when video recording. 0 In “5. Focus/Zoom”, the functions described work with both pictures and video. Please also refer to that section. – Selecting the Focus Mode: l 93 – Selecting the AF Mode: l 100 – AF Area Movement Operation: l 115 – Record Using MF: l 120 – Recording with Zoom: l 124 [Continuous AF] You can select how to set the focus in AF when recording videos.
10. Recording Videos 0 In the [iA] mode, the camera automatically keeps focusing during recording standby, irrespective of the [Continuous AF] setting. 0 Depending on the recording conditions or lens used, the AF operation sound may be recorded during video recording. If the operation sound bothers you, we recommend recording with [Continuous AF] set to [OFF]. 0 If the zoom is operated while recording videos, the subject may take a while to come into focus.
10. Recording Videos [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. ¨[ ]¨[ ] ¨ Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [AF Speed] [SET] [AF Sensitivity] 258 [r] side: Focus moves at a faster speed. [s] side: Focus moves at a slower speed. [r] side: When the distance to the subject changes significantly, the camera immediately readjusts the focus.
10. Recording Videos Video Brightness and Coloring This section describes the brightness and coloring settings used during video recording. 0 In “7. Metering/Exposure/ISO Sensitivity” and “8. White Balance/Image Quality”, the functions described work with both pictures and video. Please also refer to those sections.
10. Recording Videos Recording While Controlling Overexposure (Knee) When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure. 1 Set [Photo Style] to [Like709]. ≥ ¨[ ]¨[ Style] ¨ [Like709] /LNH ] ¨ [Photo ±0 ±0 2 260 Press [Q].
10. Recording Videos 3 Select a knee setting. $872 ≥Press 21 to select a setting item. Adjusts the compression levels of high-luminance areas automatically. [AUTO] You can set the luminance where compression starts (knee master point) and the intensity of compression (knee master slope). [MANUAL] Press 34 to select an item and then press 21 to adjust. [POINT]: Knee master point [SLOPE]: Knee master slope 0 Rotate to adjust the knee master point, and to adjust the knee master slope.
10. Recording Videos [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. 1 Set the mode dial to [ [S&Q]. 2 ] or Set [ISO Sensitivity (video)]. ≥ ¨[ ]¨[ ]¨ [ISO Sensitivity (video)] Setting Items ([ISO Sensitivity (video)]) [ISO Auto Lower Limit Setting] Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO]. 0 Set in the range between [100] and [25600].
10. Recording Videos Audio Settings This section describes the audio settings used when video recording. Displaying the [Audio] menu. ≥ ¨[ [Sound Rec Level Disp.] [Sound Rec Level Adj.] [Sound Rec Level Limiter] ] [Video] menu ¨ [ ] [Audio] The sound recording level is displayed on the recording screen. 0 When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON]. Manually adjust the sound recording level.
10. Recording Videos Main Assist Functions This section describes the main assist functions that are convenient when recording. 0 The [Custom] ([Monitor / Display (Video)]) menu has display assist functions such as the center marker. For details, refer to page 392. [Waveform Monitor] You can display in the recording screen a waveform. You can check detailed information about the brightness. 1 2 264 Set the mode dial to [ [S&Q]. ] or Set [Waveform Monitor].
10. Recording Videos 3 Select the position to display. ≥Press 3421 to select and then press or . 0 You can also move using touch operations. 0 To return the waveform or vector scope position back to the center, press [DISP.]. Screen Displays (%, IRE (Institute of Radio Engineers)) 109 100 50 0 4 The range between 0 and 100 shows dotted lines at intervals of 10.
10. Recording Videos [Luminance Spot Meter] Specify any spot on the subject to measure the luminance over a small area. 1 Set [Luminance Spot Meter]. ≥ 2 ¨[ ]¨[ ] ¨ [Luminance Spot Meter] ¨ [ON] Select the position where you want to measure the luminance. ≥Press 3421 to select and then press or . 65% A Luminance value 0 You can also change the position by dragging the frame on the recording screen. 0 To return the position back to the center, press [DISP.].
10. Recording Videos [Zebra Pattern] Parts that are brighter than the base value are displayed with stripes. You can also set the base value and the breadth of the range so that the stripes are displayed on parts that are within the range of brightness you specify. [ZEBRA1] ¨[ [ZEBRA2] ]¨[ [ZEBRA1+2] ] ¨ Select [Zebra Pattern] [ZEBRA1] Parts that are brighter than the base value are displayed with [ZEBRA1] stripes.
10. Recording Videos When [BASE/RANGE] Was Selected with [SET] Centerd on the brightness set with [Base Level], parts with the brightness in the range set in [Range] are displayed with the stripes. ≥ [Base Level] can be set in the range between 0 % and 109 % (IRE). ≥ [Range] can be set in the range between n1 % and n10 % (IRE). 0 When [Photo Style] is set to [V-Log], these are set at “Stop” units. (Calculated as “0 Stop”=42 % (IRE)) 0 [ZEBRA1+2] cannot be selected while you are setting [BASE/RANGE].
10. Recording Videos Slow & Quick Video In the [S&Q] mode, the camera records at a different frame rate to the recording frame rate, enabling the creation of slow motion video and quick motion video in the MP4 format. Slow Motion Video (Overcrank Recording) Set a number of frames that is higher than the recording frame rate of the [Rec Quality]. For example: When recording at 60 fps when set to a 30p [Rec Quality], the speed is halved.
10. Recording Videos 3 Set the frame rate. ¨[ ]¨[ ] ¨ [Slow & Quick Setting] ≥Rotate , or to select a numeric value, then press or . ≥ 0 You can set a frame rate in the following ranges: – 4K video: 1 fps to 60 fps – FHD video: 1 fps to 180 fps Frame Rate Combinations and Playback Speeds [Switch NTSC/PAL]: [NTSC] Frame rate 4K/30p 4K/24p FHD/60p FHD/30p FHD/24p 180 fps s s 3k Slow 6k Slow 7.5k Slow 150 fps s s 2.5k Slow 5k Slow 6.
10. Recording Videos [Switch NTSC/PAL]: [PAL] Frame rate 4K/25p FHD/50p FHD/25p 180 fps s 3.6k Slow 7.2k Slow 150 fps s 3k Slow 6k Slow 120 fps s 2.4k Slow 4.8k Slow 100 fps s 2k Slow 4k Slow 60 fps 2.4k Slow 1.2k Slow 2.4k Slow 30 fps 1.2k Slow 1.67k Quick 1.2k Slow 15 fps 1.67k Quick 3.33k Quick 1.67k Quick 10 fps 2.5k Quick 5k Quick 2.5k Quick 5 fps 5k Quick 10k Quick 5k Quick 2 fps 12.5k Quick 25k Quick 12.
10. Recording Videos [Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. Pan Zoom in 0 Use a tripod to minimize camera shake. 1 2 Set the mode dial to [ Set [Rec. File Format] to [MP4] or [MOV]. ≥ 272 ]. ¨[ ]¨[ ] ¨ [Rec.
10. Recording Videos 3 Select a recording quality with which you can record [Live Cropping] video. ≥ ¨[ Quality] ]¨[ ] ¨ [Rec 0 A recording quality with which you can 4 record [Live Cropping] video: l 287 Set the time for panning or zooming. ≥ ¨[ ]¨[ ] ¨ [Live Cropping] ¨ [40SEC]/[20SEC] 0 If you have selected a recording quality 5 6 where Live Cropping recording is not available, the camera switches to an FHD video recording quality where recording is possible.
10. Recording Videos 7 Start Live Cropping recording. ≥Press the video rec. button. C Elapsed recording time D Set operating time 0 When the set operating time has elapsed, recording automatically ends. To end recording midway, press the video rec. button again.
10. Recording Videos Operations for Setting the Cropping Frame Button operation Touch operation 3421 Touch / Pinch out/ pinch in s [DISP.] [Reset] / [Set] Description of operation Moves the frame. Enlarges/reduces the frame in small steps. Enlarges/reduces the frame. Start frame: Returns the frame position and size to the default settings. End frame: Cancels the settings for the position and size of the frame. Confirms the frame position and size. 0 AF mode switches to [ ] (face detection).
10. Recording Videos Log Recording Setting [Photo Style] to [V-Log] enables Log recording. Images finished with rich gradation can be created through post-production processing. ¨[ ]¨[ ] ¨ [Photo Style] ¨ Select [V-Log] 0 Post-production processing is enabled by utilizing LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.
10. Recording Videos Exposure When [V-Log] Is Set The [V-Log] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the standard exposure when gray with a reflectance ratio of 18 % is imaged is IRE 42 %.
10. Recording Videos [V-Log View Assist] When [Photo Style] is set to [V-Log], the recording screen and images output via HDMI will darken. Using [V-Log View Assist] means you can show images with LUT data applied on the monitor/viewfinder and output them via HDMI. ¨[ ]¨[ ] ¨ Select [V-Log View Assist] [Read LUT File] Reads LUT data from the card. [LUT Select] Selects the LUT data to be applied from among the preset ([Vlog_709]) and registered LUT data.
10. Recording Videos Reading LUT Files 0 The following LUT data can be used: – The “.vlt” format, which meets the requirements specified in the “VARICAM 3DLUT REFERENCE MANUAL Rev.1.0” – File names consisting of up to 8 alphanumeric characters (excluding extension) 0 Save the LUT data with a file extension of “.vlt” in the root directory of the card (the folder opened when the card is opened on a PC). 1 Insert a card on which LUT data is saved into the camera. 2 Select [Read LUT File].
10. Recording Videos HLG Videos Record videos with the wide dynamic range of the HLG format. You can record in very bright light where overexposure can occur or in dark areas where underexposure can occur, maintaining the rich yet subtle colors you can see with your naked eye. You can view the video that you record by outputting via HDMI to devices (TVs, etc.) that support the HLG format, or playing back directly on supporting devices. 0 “HLG (Hybrid Log Gamma)” is an international standard (ITU-R BT.
10. Recording Videos 3 Select a recording quality with which you can record HLG video. ≥ ¨[ Quality] ]¨[ ] ¨ [Rec 0 Items available for recording with HLG video are indicated as [HLG available]. 4 0 Recording qualities with which you can record HLG video: l 287 Set [Photo Style] to [Like2100(HLG)]. ≥ /LNH +/* ¨[ ]¨[ ] ¨ [Photo Style] ¨ [Like2100(HLG)] ±0 ±0 0 The monitor and viewfinder on this camera do not support display of HLG format images.
10. Recording Videos [HLG View Assist] At recording or playback of [HLG Photo] and HLG video, this displays images with converted color gamut and brightness on the camera monitor/ viewfinder, or outputs these over HDMI. ¨[ ]¨[ ] ¨ [HLG View Assist] ¨ [Monitor] or [HDMI] [AUTO]¢ Converts images before outputting them via HDMI while applying the effect of [MODE2]. This conversion setting works only when the camera is connected to a device that does not support HDR (HLG format).
10. Recording Videos Anamorphic Recording This camera can record video with a resolution of 4K-A (anamorphic (4:3) video) that is compatible with anamorphic recording with an aspect ratio of 4:3. Along with the normal 16:9 video aspect ratio, you can select the recording quality suited to anamorphic recording. 4K30p/25p/24p, FHD (16:9)/Full 4K-A (4:3)/APS-C 4K/FHD (16:9)/APS-C 0 The above shows some of the recording qualities available when a full-frame lens is attached.
10. Recording Videos [Anamorphic(4:3)] You can record video with an aspect ratio of 4:3 and 4K-A resolution compatible with anamorphic recording. 1 2 Set the mode dial to [ ]. Set the image quality for [Anamorphic(4:3)]. ≥ ¨[ ]¨[ ]¨ [Anamorphic(4:3)] 0 [Rec. File Format] changes to [MOV].
10. Recording Videos Setting Items ([Anamorphic(4:3)]) 0 Audio format: LPCM (2ch) A Recording frame rate B Bit rate (Mbps) C Video compression format (HEVC: H.265/HEVC, AVC: H.264/MPEG-4 AVC) [Switch NTSC/PAL]: [NTSC] [Rec Quality] Resolution YUV/bit A B C [4K-A/30p/422/10-L]¢ 3328k2496 4:2:2/10 bit 29.97p 150 AVC [4K-A/30p/420/8-L] 3328k2496 4:2:0/8 bit 29.97p 100 AVC [4K-A/24p/422/10-L]¢ 3328k2496 4:2:2/10 bit 23.98p 150 AVC [4K-A/24p/420/8-L] 3328k2496 4:2:0/8 bit 23.
10. Recording Videos [Anamorphic Desqueeze Display] Display the desqueezed images suited to the magnification of the anamorphic lens on this camera. Using the [Frame Marker], it is also possible to superimpose on display the frame of the angle of view when cropping after desqueeze editing. 1 2 Set the mode dial to [ ] or [S&Q]. Set [Anamorphic Desqueeze Display]. ≥ ¨[ ]¨[ ]¨ [Anamorphic Desqueeze Display] Settings: [ [ [ [ [ ]([2.0k])/ ]([1.8k])/ ]([1.5k])/ ]([1.33k])/ ]([1.
10. Recording Videos List of Recording Qualities That Enable Special Videos to be Recorded S&Q : Recording qualities with which you can record Slow & Quick video Live Crop : HLG Recording qualities that enable use of [Live Cropping] : Recording qualities with which you can record HLG video [Rec.
10. Recording Videos [Rec.
11. Connections with External Devices (Video) HDMI Devices (HDMI Output) You can record while outputting the camera images to an external monitor or external recorder connected with an HDMI micro cable. 0 HDMI output control differs between during recording and during playback. Refer to page 401 for HDMI output settings during playback. Getting started: 0 Turn off the camera and the external monitor/external recorder.
11. Connections with External Devices (Video) 0 Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D–Type A plug, up to 2 m (6.6 feet) long) Images Output via HDMI The images output via HDMI differ depending on the recording mode. [ ]/[S&Q] Mode Resolution and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu.
11. Connections with External Devices (Video) [iA]/[P]/[A]/[S]/[M] Mode While recording video or when [Photo/Video Preview] is set to [ ], output is the same as [ ]/[S&Q] mode. Output is with a 16:9 aspect ratio during recording standby. Resolution, frame rate, YUV, and bit value output matches the connected device. 0 When set to any [Aspect Ratio] other than 16:9, bands are added to the images and they are output with a 16:9 aspect ratio.
11. Connections with External Devices (Video) [HDMI Rec Output] Sets HDMI output during recording. ¨[ ]¨[ ] ¨ Select [HDMI Rec Output] [Info Display] Output the camera information display to an external device connected by HDMI. [HDMI Recording Control] Recording start and stop control information is output to an external recorder connected by HDMI. 0 [HDMI Recording Control] can be set when [HDMI Time Code Output] is set to [ON] in [ ] mode.
11. Connections with External Devices (Video) External Microphones (Optional) With a Stereo Shotgun Microphone (DMW-MS2: optional) or Stereo Microphone (VW-VMS10: optional), you can record higher-quality audio compared to the built-in microphone. 1 Set the [Mic Socket] that suits the device to be connected. ≥ ¨[ ]¨[ ] ¨ [Mic Socket] [Mic Input (Plug-in Power)] When connecting an external microphone that requires a power supply from the camera [MIC] socket.
11. Connections with External Devices (Video) 3 Connect the camera and external microphone. 0 If mounting the external microphone on the camera hot shoe A, remove the hot shoe cover. (l 227) 0 Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more. Setting the Sound Pickup Range (DMW-MS2: Optional) When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range. 1 Select [Special Mic.].
11. Connections with External Devices (Video) Reduction of Wind Noise This reduces wind noise when an external microphone is connected. ¨[ ]¨[ ] ¨ Select [Wind Cut] Settings: [HIGH]/[STANDARD]/[LOW]/[OFF] 0 While the external microphone is connected, [ ] is displayed on the screen. 0 When an external microphone is connected, [Sound Rec Level Disp.] automatically turns [ON], and the recording level is displayed on the screen.
11. Connections with External Devices (Video) XLR Microphone Adaptor (Optional) By attaching an XLR Microphone Adaptor (DMW-XLR1: optional) to the camera, you can use a commercially available XLR microphone to enable the recording of superior-quality stereo audio. A Hot shoe B Commercially available XLR microphone Getting started: 0 Turn off the camera, and remove the hot shoe cover. (l 227) Attach the XLR Microphone Adaptor to the hot shoe, and then turn on the camera.
11. Connections with External Devices (Video) 0 While an XLR Microphone Adaptor is attached, [ ] is displayed on the screen. 0 When [XLR Mic Adaptor Setting] is set to [ON], the following settings are fixed: – [Sound Rec Level Limiter]: [OFF] – [Wind Noise Canceller]: [OFF] – [Sound Output]: [REC SOUND] 0 [Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set to [ON]. 0 When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.
11. Connections with External Devices (Video) Headphones You can record videos while monitoring their sound by connecting commercially available headphones to the camera. 0 Do not use the headphone cables with the length of 3 m (9.8 feet) or more. 0 When headphones are connected, beep sounds, AF beep, and electronic shutter sounds are muted. Switching the Sound Output Method ¨[ ]¨[ [REALTIME] [REC SOUND] ] ¨ Select [Sound Output] Audio without time lag.
11. Connections with External Devices (Video) Adjusting the Headphone Volume Connect the headphones and rotate . : Reduces the volume. : Increases the volume. 0 You can also adjust the volume by touching [ ]/[ ] on the playback screen. To adjust the volume using the menu: 1 Select [Headphone Volume]. ¨[ 0 ]¨[ ] ¨ [Headphone Volume] 2 Press 34 to adjust the headphone volume and then press or . 0 It can be adjusted in a range of [0] to [LEVEL15].
12. Playing Back and Editing of Images This chapter explains how to play back and delete pictures and videos. It also explains editing using [RAW Processing] (l 312) and [Video Divide] (l 318). 0 Images recorded on devices other than this one may not be played back or edited correctly on this camera. 0 For [Playback] menus other than [RAW Processing] and [Video Divide], refer to “[Playback] Menu” beginning on page 406. Playing Back Pictures 1 300 Display the playback screen. ≥Press [(].
12. Playing Back and Editing of Images 2 Select a picture. 1/999 ≥Select the pictures by pressing 21. ≥You can move continuously through images by pressing and holding 21. ≥You can also select by rotating or . ≥You can also move through images by dragging the screen horizontally. By leaving your finger touching the left or right edge of the screen after dragging to change the image, you can continuously move through images. A Card slot 3 Stop playback. ≥Press the shutter button halfway.
12. Playing Back and Editing of Images Switching the Card to Display You can switch the card displayed just by pressing [ ] during playback. 0 You can also perform the same operation by pressing the Fn button assigned with [Card Slot Change]. For information about the Fn button, refer to page 321. 1 Press [ ]. 2 Press 34 to select [Card Slot 1] or [Card Slot 2] and then press .
12. Playing Back and Editing of Images Playing Back Videos 1 Display the playback screen. 2 Select a video. ≥Press [(]. 0 For information about how to select 8m30s images, refer to page 301. ] video icon is displayed for a video. 0 The video recording time A is displayed on the screen. Example) When 8 minutes 30 seconds: 8m30s 0 h: hour, m: minute, s: second 0 The [ 3 4 Play back the video. ≥Press 3. ≥You can also start playback by touching [ ] at the center of the screen.
12. Playing Back and Editing of Images Operations During Video Playback Button operation Touch operation Description of operation 3 / 4 — Stops. — Performs fast-rewind playback. 0 If you press 2 again, the fast-rewind speed increases. 2 Plays/pauses. Performs frame-by-frame rewinding (while paused). 1 — Performs fast-forward playback. 0 If you press 1 again, the fast-forward speed increases. Performs frame-by-frame forwarding (while paused). — / Selects the frame to display.
12. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. 1 Pause playback at the position you wish to extract a picture. ≥Press 3. 0 To fine-adjust the position, press 21 (rewind frame-by-frame or forward frame-by-frame). 2 00:06:10 00:08:30 Save the picture. ≥Press or . ≥You can also save the picture by touching [Save]. 0 The picture created from the video is saved with a [FINE] picture quality.
12. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multi-playback). You can also switch to calendar display to show images of a selected recording date. Enlarged Display Playback images can be displayed enlarged (Playback Zoom). Enlarging the playback screen. 2.0X ≥ Rotate to the right.
12. Playing Back and Editing of Images Operations During Enlarged Display Button operation Touch operation s Pinch out/ pinch in 3421 Drag s / s Description of operation Enlarges/reduces the screen. Enlarges/reduces the screen in small steps. Moves the enlarged display position. Forwards or rewinds images while maintaining the same zoom magnification and zoom position. 0 You can display the point focused with AF.
12. Playing Back and Editing of Images Thumbnail Screen 1 Switch to thumbnail display. 1/999 ≥Rotate to the left. ≥The display is switched in the order of 12-image screen 30-image screen. A Card 0 Rotating 2 to the left during 30-image screen display switches to calendar display. (l 309) 0 Rotating to the right returns to the previous display. 0 You can also switch the display by touching an icon.
12. Playing Back and Editing of Images Calendar Playback 1 2 3 Switch to calendar playback. ≥Rotate to the left. ≥The display is switched in the order of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. 0 Rotating SUN MON TUE WED THU FRI SAT 2020 12 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 to the right returns to the previous display. Select the recording date.
12. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Shooting are handled as group images in the camera, and can be deleted and edited on a group basis. (For example, if you delete a group image, all images in the group are deleted.) You can also delete and edit each image in a group individually. Images Handled as Group Images by the Camera Group images saved with [6K/4K PHOTO Bulk Saving]. 1/999 SLF Group images recorded with Focus Bracket.
12. Playing Back and Editing of Images Deleting Images 0 Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. 0 You can only delete the images in the card of the selected card slot. 0 If you delete a group image, all images in the group are deleted. 1 2 Press [ ] in playback state. Press 34 to select the deletion method and then press or . [Delete Single] [Delete Multi] Deletes the selected image. Selecting and deleting multiple images.
12. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. You can also save images recorded with [HLG Photo] in the RAW format as HLG format. 1 Select [RAW Processing]. 2 Select the RAW image. ≥ ¨[ ]¨[ Processing] ] ¨ [RAW ≥Press 21 to select an image and then press or . 0 When group images are selected, press 4 and then select an image in the group. 6HW Press 4 again to return to the normal selection screen.
12. Playing Back and Editing of Images 4 Change the setting. ≥Rotate , , or . 0 The image can be enlarged/reduced by pinching out/pinching in the screen. DISP. -2 5 0 +1 +2 Confirm the setting. ≥Press or . ≥The screen of Step reappears. To set another item, repeat Steps 3 6 -1 3 to 5. Save the image. ≥Press 34 to select [Begin Processing] and then press .
12. Playing Back and Editing of Images Setting Items ([RAW Processing]) 314 [Begin Processing] Saves the image. [White Balance] Selects and adjusts the white balance. Selecting the item with [ ] enables processing with the same setting as at the time of recording. 0 If you press 4 in the [White Balance] selection screen, the white balance adjustment screen appears. 0 If you press 3 while [ 1 ] to [ 4 ] is selected, the color temperature setting screen appears.
12. Playing Back and Editing of Images [Saturation]/ [Color Tone] Adjusts the saturation or color tone. [Hue] Adjusts the hue. [Filter Effect] Selects filter effects. [Grain Effect] 0 You cannot set this for images recorded in [High Selects a grain effect setting. Resolution Mode]. S [Noise Reduction] Sets noise reduction. [Sharpness] Adjusts the sharpness. [More Settings] [Revert To Original]: Returns the settings to the ones from the time of recording.
12. Playing Back and Editing of Images 0 The items that can be adjusted depend on the selected [Photo Style].
12. Playing Back and Editing of Images Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. 1 Press [DISP.] in the screen of Step 4. 0 The image with the current setting A is displayed at the center. 0 Touching the image with the current setting enlarges it. Touching [ ] returns to the original display. 0 A comparison screen cannot be displayed while [Noise Reduction] or [Sharpness] is selected.
12. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 6K/4K burst file into two. 0 Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. 0 Do not remove the card or battery from the camera during the divide process. The images may be lost. 1 Select [Video Divide]. 2 Select and play the image. 3 ≥ ¨[ Divide] ]¨[ ] ¨ [Video ≥Press 21 to select an image and then press or .
12. Playing Back and Editing of Images 4 Divide the video. ≥Press or . ≥You can also divide the video by touching [Divide]. 0 Dividing the video at a point close to the start or end may not be possible. 0 Videos with a short recording time cannot be divided.
13. Camera Customization This chapter describes the customization function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. [Fn Button Set] l 321 [Dial Operation Switch Setup] l 330 Register the currently set information of the camera. Custom mode l 337 Change menu display items. Quick menu l 332 My Menu l 341 Import camera settings information onto another camera.
13. Camera Customization Fn Buttons You can register functions to the Fn (Function) buttons. Additionally, you can register other functions to specialized buttons such as [WB] button, in the same way as with the Fn buttons. Different functions can be set for both during recording and playback.
13. Camera Customization Fn3 Fn4 Fn5 Fn6 OFF Fn7 OFF 11 12 Fn buttons 11 [Setting in REC mode] [Fn3] [Wi-Fi] [Fn4] [Histogram] [Fn5] [Boost I.S. (Video)] [Fn6] [Off (Disable Press and Hold)] [Fn7] [Off (Disable Press and Hold)] [Fn8] [Fn9] 12 [Fn13] [Fn14] [Fn15] [Fn16] 322 [Setting in PLAY mode] 0 Cannot be used as Fn [Fn10] [No Setting] [Fn11] [Fn12] 13 13 [No Setting] buttons during playback.
13. Camera Customization Register Functions to the Fn Buttons 0 With default settings, [Fn8] to [Fn12] on the joystick cannot be used. When using functions, set the [Joystick Setting] in the [Custom] ([Operation]) menu to [Fn]. (l 381) 1 Select [Fn Button Set]. 2 Select the button. ≥ ¨[ ]¨[ ] ¨ [Fn Button Set] ¨ [Setting in REC mode]/ [Setting in PLAY mode] ≥Press 34 to select the button and then press or . ≥Selection is also possible by rotating or . 0 Press [DISP.] to change the page.
13. Camera Customization 4 Register the function. ≥Press 34 to select a function and then press or . ≥Selection is also possible by rotating or . 0 Select items with [N] by selecting the item again. 0 Depending on the button, some functions cannot be registered. 0 You can also touch [ Fn ] on the control panel (l 67) to display the screen in Step 2. 0 You can also press and hold the Fn button (2 sec.) to display the screen in 4 Step .
13. Camera Customization Setting Items ([Fn Button Set]/[Setting in REC mode]) [1] tab [Image Quality] [Focus/Shutter] [Exposure Comp.
13. Camera Customization [Others (Photo)] [Drive Mode] l 128 [1 Shot "6K/4K PHOTO"] 0 Performs 6K/4K photo recording only once. [Bracketing] l 156 [Silent Mode] l 174 [Image Stabilizer] l 177 [Shutter Type] l 175 [Ex. Tele Conv.] l 125 [Live View Composite] l 162 [Post-Focus] l 166 [2] tab [Video Record] l 240 [Rec. File Format] l 249 [LVF/Monitor Switch] l 66 [Rec Quality] l 250 [Operation Lock] 0 A certain type of operation is disabled.
13. Camera Customization [LVF/Monitor Disp. Style] 0 Switches the displayed monitor or viewfinder display style. [Photo/Video Preview] l 388 [Zebra Pattern] l 393 [LUT View Assist (Monitor)] l 278 [LUT View Assist (HDMI)] l 278 [LUT Select] l 278 [HLG View Assist (Monitor)] l 282 [HLG View Assist (HDMI)] l 282 [Sheer Overlay] l 390 [I.S.
13. Camera Customization Setting Items ([Fn Button Set]/[Setting in PLAY mode]) [1] tab [Playback Mode] [Edit Image] [Magnify from AF Point] l 408 [LUT View Assist (Monitor)] l 278 [HLG View Assist (Monitor)] l 392 [Anamorphic Desqueeze Display] l 286 [Process Image] [RAW Processing] l 312 [6K/4K PHOTO Bulk Saving] l 144 [Copy] [Rec / Playback Switch] 0 Switches to the recording screen.
13. Camera Customization Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, usage of the functions registered in [Setting in PLAY mode]. 1 2 Press the Fn button. Select a setting item. ≥Press 21 to select a setting item and then press or . ≥Selection is also possible by rotating , or . 0 Display and selection methods of a setting item differ depending on the menu item.
13. Camera Customization [Dial Operation Switch] This temporarily changes the functions operated with (rear dial). (front dial) and Register Functions to the Dials 1 Select [Dial Operation Switch Setup]. ≥ 2 ¨[ ]¨[ ] ¨ [Dial Set.] ¨ [Dial Operation Switch Setup] ¨ [ ]/[ ] Register the function. ≥Press 34 to select a function and then press or . Functions That Can Be Registered [Exposure Comp.
13. Camera Customization Temporarily Change Dial Operation 1 2 Set [Dial Operation Switch] to the Fn button. (l 321) Switch dial operation. 1 ≥Press the Fn button set in Step . ≥A guide will display the functions registered to and . WB 0 If no operations are performed, then ISO several seconds later, the guide disappears. 3 Set the registered function. ≥Rotate or is displayed. while the guide ISO WB 4 AWB AWBc AWBw Confirm your selection. ≥Press the shutter button halfway.
13. Camera Customization Quick Menu Customization You can change Quick menu items depending on the recording mode. Additionally, you can change the items to display on the Quick menu and their order to suit your preferences. For information about Quick menu operation methods, refer to page 69. Register to the Quick Menu Change the menus to be displayed in the Quick menu. These can be set separately for [ ]/[S&Q] mode (Video) and for other recording modes (Photo). 1 2 332 Select [Q.MENU Settings].
13. Camera Customization 3 Find the function to register. 4 Register menu items. ≥Rotate to select the sub tab where the function to register is categorized (l 334) and then press or . ≥You can also select by pressing 2 to select the sub tab, pressing 34 or rotating , and then pressing 1. ≥Each press of [Q] switches between tabs [1] and [2]. ≥Press 34 to select an item and then press or . ≥Selection is also possible by rotating or . 0 Select items with [N] by selecting the item again.
13. Camera Customization Menu Items That Can Be Registered [1] tab [Image Quality] [Others (Photo)] [Exposure Comp.] l 196 [Drive Mode] l 128 [Sensitivity] l 199 [Bracketing] l 156 [White Balance] l 202 [Silent Mode] l 174 [Photo Style] l 208 [Image Stabilizer] l 177 [Metering Mode] l 184 [Shutter Type] l 175 [Aspect Ratio] l 83 [Ex. Tele Conv.] l 125 [Picture Quality] l 86 [Post-Focus] l 166 [Picture Size] l 85 [Image Format] [HLG Photo] l 225 [Rec.
13. Camera Customization [2] tab [Monitor / Display] [Lens / Others] [Constant Preview] l 383 [Focus Ring Control] [Level Gauge] l 391 [Card/File] [Histogram] l 384 [Luminance Spot Meter] l 266 [Frame Marker] l 268 [Photo Grid Line] l 385 [Live View Boost] l 386 [Monochrome Live View] l 392 [Night Mode] l 387 [LVF/Monitor Disp.
13. Camera Customization Quick Menu Detailed Settings Change the appearance of the Quick menu and the operation of during menu display. ¨[ ]¨[ ] ¨ Select [Q.MENU Settings] [Layout Style] Changes the appearance of the Quick menu. [MODE1]: Displays the live view and the menu simultaneously. [MODE2]: Displays the menu in full screen. [Front Dial Assignment] Changes the operation of in the Quick menu. [Item]: Selects menu items. [Value]: Selects setting values.
13. Camera Customization Custom Mode Recording modes and menu settings that match your preferences can be registered in Custom mode. You can use registered settings by switching the mode dial to [C1] to [C3] modes. Register in Custom Mode You can register the currently set information of the camera. At the time of purchase, the default settings of the [P] mode menus are registered with all Custom modes. 1 Set to recording mode and menu settings of the state you wish to save.
13. Camera Customization Custom Mode Detailed Settings You can create additional Custom mode sets, and how long to retain temporarily changed settings details. ¨[ ]¨[ [Limit No. of Custom Mode] ] ¨ Select [Custom Mode Settings] Sets the number of Custom modes that can be registered in [C3]. A maximum of 10 sets can be registered; 3 sets are available as default settings. [Edit Title] Changes the Custom mode name. A maximum of 22 characters can be entered.
13. Camera Customization Using Custom Mode Set the mode dial to one of [C1] to [C3]. ≥ If [C3], the last-used Custom mode will be called up. [C3] Custom Mode Selection 1 Set the mode dial to [C3]. 2 Press . 0 The Custom mode selection menu appears. 3 Press 34 to select the Custom mode and then press or . 0 The selected Custom mode icon will be displayed on the recording screen.
13. Camera Customization Calling Up Settings Call up registered Custom mode settings to the selected recording mode and overwrite the current settings with these. 1 2 3 Set to the mode dial to use. Select [Load Custom Mode]. ≥ ¨[ ]¨[ Custom Mode] ] ¨ [Load Select the Custom mode to call up. ≥Select the Custom mode and then press or . 0 Calling up of Custom modes is not possible between those created from [P]/ [A]/[S]/[M] modes and those created from [ 340 ]/[S&Q] modes.
13. Camera Customization My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registered menus can be called up from [ ] to [ ]. Registration in My Menu 1 Select [Add]. 2 Register. ≥ ¨[ ]¨[ ] ¨ [Add] ≥Select the menu to register and then press or . Calling up My Menu Call up the menus registered in My Menu.
13. Camera Customization Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. ¨[ ] ¨ Select [ [Add] Selects and registers the menus to be displayed in My Menu. [Sorting] Changes the order of My Menu. Select the menu to change, then set the destination. [Delete] Deletes menus that are registered to My Menu. [Delete Item]: Selects the menu, then deletes. [Delete All]: Deletes all menus registered in My Menu.
13. Camera Customization [Save/Restore Camera Setting] Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. ¨[ ]¨[ ] ¨ Select [Save/Restore Camera Setting] Saves the camera’s settings information to the card. 0 If saving new data, then select [New File], and if overwriting an existing file, select that existing file.
14. Menu Guide Camera customization and many function settings are performed with menus on this camera. This chapter provides a list of menus and describes them in detail. Menus explained in detail in other chapters are indicated with page numbers. 0 For information about menu operation methods, refer to page 73.
14. Menu Guide List of Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. [Photo] menu l 350 [Flash] l 357 [Photo Style] [Image Quality] l 350 [Flash Mode] l 357 [Metering Mode] l 350 [Firing Mode] l 357 [Aspect Ratio] l 350 [Flash Adjust.] l 357 [Picture Quality] l 350 [Flash Synchro] l 357 [Picture Size] l 350 [Manual Flash Adjust.] l 357 [HLG Photo] l 350 [Auto Exposure Comp.
14. Menu Guide [Video] menu [Image Quality] l 364 [Audio] l 368 [Exposure Mode] l 364 [Sound Rec Level Disp.] l 368 [Photo Style] l 364 [Sound Rec Level Adj.] l 368 [Metering Mode] l 364 [ISO Sensitivity (video)] l 364 [Sound Rec Level Limiter] l 368 [Flicker Decrease (Video)] l 365 [Wind Noise Canceller]/ l 368 [Wind Cut] l 368 [i.Dynamic Range] l 365 [Mic Socket] l 368 [Vignetting Comp.] l 354 [Special Mic.
14. Menu Guide [Custom] menu [Image Quality] l 370 [Fn Button Set] l 378 [Photo Style Settings] l 370 [WB/ISO/Expo. Button] l 379 [ISO Increments] l 370 [ISO Displayed Setting] l 379 [Extended ISO] l 371 [Exposure Offset Adjust.] l 371 [Exposure Comp. Disp. Setting] l 379 [Color Space] l 371 [Dial Set.] l 380 [Exposure Comp. Reset] l 372 [Joystick Setting] l 381 [Auto Exposure in P/A/S/M] l 372 [Video Rec.
14.
14. Menu Guide [Setup] menu (Continued) l 404 [Sensor Cleaning] l 404 [Clock Set] l 404 [Language] l 405 [Time Zone] l 404 [Firmware Version] l 405 [Pixel Refresh] l 404 [Online Manual] l 405 [Others] [My Menu] [Page 1] l 341 [Page 2] l 341 [Page 3] l 341 [Edit My Menu] l 342 [Add] l 342 [Sorting] l 342 [Delete] l 342 [Display from My Menu] l 342 [Add/Delete Info.
14. Menu Guide [Photo] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. `: Default settings [Photo] menu ¨ [Photo Style] [Image Quality] `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.
14. Menu Guide [Photo] menu ¨ [Image Quality] [Start] [High Resolution Mode] [Picture Size] `[XL]/[LL] [Picture Quality] `[COMBINED]/[FINE]/ [RAWiFINE]/[RAW] [Simul Record Normal Shot] `[ON]/[OFF] [Shutter Delay] [30 SEC] to [1/8 SEC] (`[2 SEC])/[Off] [Motion Blur Processing] `[MODE1]/[MODE2] l 221 Merges pictures with a high resolution from multiple recorded images.
14. Menu Guide [Photo] menu ¨ [ISO Sensitivity (photo)] [Image Quality] [ISO Auto Lower Limit Setting] `[100] to [25600] [ISO Auto Upper Limit Setting] `[AUTO]/[200] to [51200] — Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. 0 When the following function is being used, [ISO Sensitivity (photo)] is not available: – [Live View Composite] `[AUTO]/[1/8000] to [1/1] [Min.
14. Menu Guide [Photo] menu ¨ [Image Quality] [AUTO]/[HIGH]/[STANDARD]/[LOW]/`[OFF] Contrast and exposure are compensated when the brightness difference between the background and subject is great. 0 Compensation effect may not be achieved [i.Dynamic Range] depending on the recording conditions. — 0 When the following functions are being used, [i.
14. Menu Guide [Photo] menu ¨ [Image Quality] `[ON]/[OFF] When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected. 0 Compensation effect may not be achieved depending on the recording conditions. 0 Noise in the periphery of the picture may stand [Vignetting Comp.] out with higher ISO sensitivity. — 0 When the following function is being used, [Vignetting Comp.
14. Menu Guide [Photo] menu ¨ [Filter Settings] [Image Quality] [Filter Effect] [ON]/`[OFF]/[SET] [Simultaneous Record w/o Filter] [ON]/`[OFF] l 215 This mode records with additional image effects (filters). [Photo] menu ¨ [Focus] `[Set 1]/[Set 2]/[Set 3]/[Set 4] [AF Custom Setting(Photo)] Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene.
14. Menu Guide [Photo] menu ¨ [Focus] `[ON]/[OFF] [SET] [Focus Peaking Sensitivity] [Display Color] [Display While AFS] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color. 0 If the [Focus Peaking Sensitivity] is adjusted to [Focus Peaking] 0 0 0 0 0 the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus. With [Display Color], you can set the display color of the in-focus portion.
14. Menu Guide [Photo] menu ¨ [Flash Mode] `[‰]/[ [Flash] ]/[ ]/[ ]/[Œ] Sets the flash mode. l 229 `[TTL]/[MANUAL] [Firing Mode] You can select whether to set the flash output automatically or manually. l 232 [j3 EV] to [i3 EV] (`[±0 EV]) [Flash Adjust.] [Flash Synchro] [Manual Flash Adjust.] [Auto Exposure Comp.] When [Firing Mode] is set to [TTL], you can adjust the flash output. `[1ST]/[2ND] Sets the flash mode to Second Curtain Synchro.
14. Menu Guide [Photo] menu ¨ [Flash] [ON]/`[OFF] [Wireless FP] Uses FP firing for an external flash when recording with a wireless flash. [Communication Light] `[HIGH]/[STANDARD]/[LOW] [Wireless Setup] l 239 l 239 Set the strength of communication light. [External Flash] [Firing Mode]/[Flash Adjust.]/[Manual Flash Adjust.] [A Group]/[B Group]/ [C Group] [Firing Mode]/[Flash Adjust.]/[Manual Flash Adjust.] l 238 Sets details for wireless flash recording.
14. Menu Guide [Photo] menu ¨ [Image Stabilizer] [Others (Photo)] [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.)] [ ]/`[ [When to Activate] [ALWAYS]/ `[HALF-SHUTTER] [E-Stabilization (Video)] [ON]/`[OFF] [Boost I.S. (Video)] [ON]/`[OFF] [Anamorphic (Video)] [ ]/[ ]/[ [ ]/[ ]/`[OFF] [Focal Length Set] ]/ ] l 177 ]/ [0.1 mm] to [1000.0 mm] (`[35.0 mm]) Configures image stabilizer settings.
14. Menu Guide [Photo] menu ¨ [Shutter Type] [Others (Photo)] [AUTO]/`[MECH.]/[EFC]/[ELEC.]/[ELEC.+NR] Selects the shutter type to use for taking pictures. l 175 [8SEC]/[4SEC]/[2SEC]/[1SEC]/`[OFF] [Shutter Delay] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed.
14. Menu Guide [Photo] menu ¨ [Others (Photo)] [Start] [Shutter Delay] [Live View Composite] [Self Timer] [6K/4K PHOTO] [8 SEC]/[4 SEC]/[2 SEC]/ [1 SEC]/`[OFF] Images are recorded over several times and only the parts that change to become brighter form part of the composition. `[ ]/[ ]/[ ] Sets the self-timer duration.
14. Menu Guide [Photo] menu ¨ [Others (Photo)] [6K 18M]/[4K 8M]/`[OFF] [Post-Focus] Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. l 166 [Start] [Auto Gain] `[ON]/[OFF] [Overlay] [ON]/`[OFF] You can apply an effect equivalent to four exposures on a single image. [Multiple Exposure] [Start]: Starts exposure for multiple exposures.
14. Menu Guide [Photo] menu ¨ [Others (Photo)] 0 To finish multiple exposure recording before 0 0 0 [Multiple Exposure] (Continued) 0 0 starting the recording, press [Q] on the recording screen. Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures. [Overlay] can be set only for RAW images recorded with the camera.
14. Menu Guide [Video] Menu : Menu items common to the [Photo] menu and [Video] menu. Their settings are synchronized. `: Default settings [Video] menu ¨ [Image Quality] `[P]/[A]/[S]/[M] [Exposure Mode] [Photo Style] Sets the exposure mode to use in [ mode. ]/[S&Q] `[Standard]/[Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[Monochrome]/[L.Monochrome]/ [L.
14. Menu Guide [Video] menu ¨ [Image Quality] [1/50]/[1/60]/[1/100]/[1/120]/`[OFF] [Flicker Decrease (Video)] The shutter speed can be fixed to reduce the flicker or striping in the video. 0 This can be set when [Auto Exposure in P/A/S/ M] is [ON]. — [AUTO]/[HIGH]/[STANDARD]/[LOW]/`[OFF] [i.Dynamic Range] Contrast and exposure are compensated when the brightness difference between the background and subject is great. l 353 `[ON]/[OFF] [Vignetting Comp.
14. Menu Guide [Video] menu ¨ [Image Area of Video] [Rec Quality] [Slow & Quick Setting] [Image Format] `[FULL]/[APS-C]/[PIXEL/PIXEL] Sets the image area during video recording. Sets the video recording image quality. l 249 l 250 [1fps] to [180fps] (`[30fps]) Varies the recording frame rate to record slow motion video and quick motion video. l 270 [NTSC]/`[PAL] [Switch NTSC/PAL] [Rec.
14. Menu Guide [Video] menu ¨ [Focus] [ON]/`[OFF] [AF Custom Setting(Video)] [SET] [AF Speed] [AF Sensitivity] l 258 You can fine-adjust the focusing method for video recording using [Continuous AF]. `[MODE1]/[MODE2]/[OFF] [Continuous AF] You can select how to set the focus in AF when recording videos. l 256 `[ON]/[OFF] [AF Assist Light] When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus.
14. Menu Guide [Video] menu ¨ [Sound Rec Level Disp.] [Sound Rec Level Adj.] [Audio] [ON]/`[OFF] The sound recording level is displayed on the recording screen. [MUTE]/[j12dB] to [i6dB] (`[0dB]) Manually adjust the sound recording level. l 263 l 263 `[ON]/[OFF] [Sound Rec Level Limiter] The sound recording level is adjusted automatically to minimize sound distortion (crackling noise).
14. Menu Guide [Video] menu ¨ [Headphone Volume] [Audio] [0] to [LEVEL15] (`[LEVEL3]) l 299 Adjusts the volume when headphones are connected. [Video] menu ¨ [Others (Video)] [ON]/`[OFF] [Silent Mode] [Image Stabilizer] Disables all operation sounds and light output at once. [Operation Mode] `[ [ ]/[ ]/[ ]/[OFF] [Body(B.I.S.) / Lens(O.I.S.)] [ ]/`[ [When to Activate] [ALWAYS]/ `[HALF-SHUTTER] [E-Stabilization (Video)] [ON]/`[OFF] [Boost I.S.
14. Menu Guide [Custom] Menu `: Default settings [Custom] menu ¨ [Image Quality] [Show/Hide Photo Style] [Vivid]/[Natural]/[Flat]/[Landscape]/ [Portrait]/[L.Monochrome]/ [L.Monochrome D]/[Cinelike D2]/ [Cinelike V2]/[Like709]/[V-Log]/ [Like2100(HLG)]/[MY PHOTO STYLE 1] to [MY PHOTO STYLE 10] Sets Photo Style items to be displayed on the menu. [Photo Style Settings] [My Photo Style Settings] [Add Effects] [Load Preset Setting] Enables detailed image quality adjustment settings for My Photo Style.
14. Menu Guide [Custom] menu ¨ [Image Quality] [ON]/`[OFF] [Extended ISO] [Exposure Offset Adjust.] Setting of ISO sensitivity to a minimum of [ISO50] and a maximum of [ISO204800] is possible. [Multi Metering] [j1EV] to [i1EV] (`[n0EV]) [Center Weighted] [j1EV] to [i1EV] (`[n0EV]) [Spot] [j1EV] to [i1EV] (`[n0EV]) [Highlight Weighted] [j1EV] to [i1EV] (`[n0EV]) Adjusts the exposure level that is the standard exposure for each setting item of [Metering Mode].
14. Menu Guide [Custom] menu ¨ [Exposure Comp. Reset] [Image Quality] [ON]/`[OFF] This resets the exposure value when you change the recording mode or turn off the camera. `[ON]/[OFF] [Auto Exposure in P/A/S/M] Selects the setting method for aperture value, shutter speed, and ISO sensitivity for the video being recorded in the [P]/ [A]/[S]/[M] modes. [ON]: Records with values set automatically by the camera. [OFF]: Records with manually set values. [CreativeVideo Combined Set.
14. Menu Guide [Custom] menu ¨ [Focus/Shutter Priority] [Focus/Shutter] [AFS] `[FOCUS]/[BALANCE]/[RELEASE] [AFC] [FOCUS]/`[BALANCE]/[RELEASE] This sets whether to give priority to focus or shutter release during AF. [FOCUS]: Disables recording when focus is not achieved. [BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing. [RELEASE]: Enables recording even when focus is not achieved.
14. Menu Guide [Custom] menu ¨ [Focus/Shutter] [Focus Ring] `[ON]/[OFF] [AF Mode] `[ON]/[OFF] [Press Joystick] [ON]/`[OFF] [MF Assist Display] [FULL]/`[PIP] This sets the display method of MF Assist (enlarged screen). [MF Assist] [Focus Ring]: The screen is enlarged by focusing with the lens. [AF Mode]: The screen is enlarged by pressing [ ]. [Press Joystick]: Press the joystick to enlarge the display. (if [Joystick Setting] is set to [D.
14. Menu Guide [Custom] menu ¨ [Show/Hide AF Mode] [Focus/Shutter] [Face/Eye/Body/ Animal Detect.] `[ON]/[OFF] [Tracking] `[ON]/[OFF] [225-Area] `[ON]/[OFF] [Zone (Vert./ Horz.)] `[ON]/[OFF] [Zone (Square)] [ON]/`[OFF] [Zone (Oval)] `[ON]/[OFF] [1-Area+] `[ON]/[OFF] [Pinpoint] `[ON]/[OFF] [Custom1] [ON]/`[OFF] [Custom2] [ON]/`[OFF] [Custom3] [ON]/`[OFF] Sets the AF mode items to be displayed on the AF mode selection screen.
14. Menu Guide [Custom] menu ¨ [AF-Point Scope Setting] [Focus/Shutter] [Keep Enlarged Display] [ON]/`[OFF] [PIP Display] [FULL]/`[PIP] Changes the enlarged screen settings of AF-Point Scope (l 97). [Keep Enlarged Display]: Setting this to [ON] maintains the enlarged screen after pressing the Fn button until it is pressed again. [PIP Display]: Sets the display method (full screen mode/ windowed mode) of the enlarged screen.
14. Menu Guide [Custom] menu ¨ [Focus/Shutter] [ON]/`[OFF] [Looped Focus Frame] When moving the AF area or MF Assist, this enables its position to loop from one edge to the other edge of the screen. [ON]/`[OFF] [AFC Start Point (225-Area)] When the focus mode is set to [AFC] in the [ you can specify which area to start [AFC]. 0 For details, refer to page 107. [Custom] menu ¨ [Q.
14. Menu Guide [Custom] menu ¨ [Operation Lock Setup] [Operation] [Cursor] `[ ]/[ ] [Joystick] `[ ]/[ ] [Touch Screen] `[ ]/[ ] [Dial] `[ ]/[ ] [DISP. Button] `[ ]/[ ] This sets the control functions to be disabled with the Fn button [Operation Lock]. (Only for recording screen) [Cursor]: Cursor buttons, [MENU/SET] button, and [Joystick]: Joystick [Touch Screen]: Touch screen [Dial]: , , and [DISP. Button]: [DISP.
14. Menu Guide [Custom] menu ¨ [Operation] [WHILE PRESSING]/[AFTER PRESSING1]/`[AFTER PRESSING2] This sets the operation to be performed when [WB] (White balance), [ISO] (ISO sensitivity) or [ ] (Exposure compensation) is pressed. [WB/ISO/Expo. Button] [WHILE PRESSING]: Allows you to change the setting while pressing and holding the button. Release the button to confirm the settings value, and to return to the recording screen. [AFTER PRESSING1]: Press the button to change settings.
14. Menu Guide [Custom] menu ¨ [Operation] [Assign Dial (F/SS)] `[SET1]/[SET2]/[SET3]/[SET4]/ [SET5] Sets the operations to be assigned to the dials in [P]/[A]/[S]/ [M] modes. : Program Shift, F: Aperture value, SS: Shutter speed [P] [SET1] s [SET2] s [SET3] s [SET4] [Dial Set.
14. Menu Guide [Custom] menu ¨ [Operation] [Exposure Comp.] [ ]/[ ]/`[OFF] Assigns exposure compensation to or . (Except in [M] mode) 0 The [Assign Dial (F/SS)] setting takes priority. [Dial Operation Switch Setup] [Dial Set.] (Continued) [ ] [ ] In the Fn button [Dial Operation Switch], this sets the functions to be registerd temporarily to or . (l 330) [Rotation (Menu Operation)] `[ [ ]/[ ]/[ ]/ ] Changes the rotational direction of the dials when operating menus. `[D.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [Duration Time (photo)] [HOLD]/[5SEC] to [0.5SEC]/`[OFF] [Duration Time (6K/ 4K PHOTO)] `[HOLD]/[OFF] [Duration Time (Post-Focus)] `[HOLD]/[OFF] [Playback Operation Priority] [ON]/`[OFF] This displays an image immediately after it is recorded. [Auto Review] [Duration Time (photo)]: Sets the Auto Review time when taking pictures. [Duration Time (6K/4K PHOTO)]: Sets the Auto Review when recording 6K/4K photos.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] [SET] [Effect] [Preview While MF Assist] [Constant Preview] You can always confirm the effects of aperture on the recording screen when in [A]/[M] mode. You can also confirm the shutter speed at the same time when in [M] mode. 0 You can set the combination of the aperture effect and the shutter speed effect in [Effect]. 0 Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON].
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press 3421 to set the position. 0 You can also move the position by dragging the histogram on the recording screen. 0 A histogram is a graph that displays [Histogram] brightness along the horizontal axis, and the number of pixels at each brightness level on the vertical axis.
14. Menu Guide [Custom] menu ¨ [ [Photo Grid Line] [Monitor / Display (Photo)] ]/[ ]/[ ]/`[OFF] Sets the grid line pattern to be displayed on the recording screen. When using [ ], you can press 3421 to set the position. 0 When using [ ], you can also drag [ ] on the grid lines on the recording screen to move the position. [ON]/`[OFF] [SET] [Frame Aspect] [Frame Color] [Frame Marker] [Frame Mask] A frame with the set aspect ratio is displayed on the recording screen.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [MODE1]/[MODE2]/`[OFF] [SET] [P/A/S/M]/`[M] Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment. [MODE1]: Setting for low brightness, with priority given to a soft display. [MODE2]: Setting for high brightness, with priority given to image visibility. 0 You can change the recording mode in which [Live View [Live View Boost] Boost] works by using [SET].
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [Monitor] [ON]/`[OFF] [LVF] [ON]/`[OFF] Displays the monitor and viewfinder in red. In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see. You can also set the luminance of the red display. 1 [Night Mode] 2 3 Press 3421 to select [ON] on the monitor or viewfinder (LVF). Press [DISP.] to display the brightness adjustment screen.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] This displays the exposure meter. SS F [Expo.Meter] 125 30 60 4.0 30 5.6 15 8.0 8 11 F5.6 0 Set to [ON] to display the exposure meter when performing Program Shift, setting aperture, and setting shutter speed. 0 If no operations are performed for a certain period of time, the exposure meter disappears. `[ON]/[OFF] [Focal Length] Displays the focal length on the recording screen during zoom control.
14. Menu Guide [Custom] menu ¨ `[ [Monitor / Display (Photo)] ]/[ ] This will switch display between the number of recordable pictures and available recording time. [ [ ]: Displays the number of recordable pictures. ]: Displays the available recording time for video. 0 Even when this is set to [ [Photos/Videos Remaining] ], the number of recordable pictures is displayed for a while after a picture is taken.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] [ON]/`[OFF] [SET] [Transparency] [Image Select] [Reset at Power Off] [Disp. Image (shutter-press)] Displays recorded pictures by overlapping on the recording screen. [Sheer Overlay] 0 Use [Image Select] to select the pictures to be displayed. Press 21 to select pictures and then press or to confirm. 0 If you set [Disp.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Photo)] `[ON]/[OFF] Displays the level gauge which is useful in correcting camera tilt. [Level Gauge] A Horizontal B Vertical C Green (no tilt) 0 Even after correcting the tilt, there may still be an error of approx. n1o. 0 When the camera is tilted significantly upwards or downwards, the level gauge may not be displayed correctly. 0 You can adjust the level gauge and reset the adjusted values in [Level Gauge Adjust.
14. Menu Guide [Custom] menu ¨ [Monitor / Display (Video)] [Read LUT File] [LUT Select] [V-Log View Assist] [LUT View Assist (Monitor)] [ON]/`[OFF] [LUT View Assist (HDMI)] [ON]/`[OFF] You can show images with LUT data applied on the monitor/ viewfinder, or output them via HDMI. 0 For details, refer to page 278.
14. Menu Guide [Custom] menu ¨ [Center Marker] [Monitor / Display (Video)] [ON]/`[OFF] The center of the recording screen will be displayed as [i]. [ZEBRA1]/[ZEBRA2]/[ZEBRA1+2]/`[OFF] [SET] [Zebra 1] [Zebra 2] [Zebra Pattern] Parts that are brighter than the base value are displayed with stripes. 0 For details, refer to page 267. [ON]/`[OFF] [Waveform Monitor] [Red REC Frame Indicator] You can display in the recording screen a waveform. You can check detailed information about the brightness.
14. Menu Guide [Custom] menu ¨ [Lens Focus Resume] [Lens / Others] [ON]/`[OFF] The camera saves the focus position when you turn it off.
14. Menu Guide [Setup] Menu `: Default settings [Setup] menu ¨ [Card/File] [Card Slot 1]/[Card Slot 2] [Card Format] Formats the card (initialization). 0 For details, refer to page 48. [Recording Method] [Double Card Slot Function] [Folder / File Settings] `[ ]/[ ]/[ ] This sets the way recording to the card slots 1 and 2 is performed. 0 For details, refer to page 88. [Select Folder]/[Create a New Folder]/[File Name Setting] Set the folder and file name where to save the images.
14. Menu Guide [Setup] menu ¨ [Power Save Mode] [Monitor / Display] [Sleep Mode] [10MIN.]/`[5MIN.]/[2MIN.]/[1MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] `[ON]/[OFF] [Auto LVF/Monitor Off] `[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Power Save LVF Shooting] [Time to Sleep] [Method of Activation] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. 0 For details, refer to page 44.
14. Menu Guide [Setup] menu ¨ [Monitor / Display] `[60fps]/[120fps] Sets the display speed for live view on the viewfinder when recording pictures. [60fps]: Reduces the power consumption for a longer operating time. [120fps]: Enables smooth display of movements. 0 [LVF120] is displayed on the viewfinder when it is displayed at [120fps]. [LVF Frame Rate] 0 When set to [120fps], the images in the viewfinder will not be as smooth as with [60fps], but there will be no change to the images recorded.
14. Menu Guide [Setup] menu ¨ [Monitor / Display] `[AUTO]/[j3] to [i3] Adjusts monitor/viewfinder luminance. [AUTO]: The brightness is adjusted automatically depending on how bright it is around the camera. [Monitor Backlight]/ [LVF Luminance] 0 Adjusts the monitor luminance when displaying the monitor, and the viewfinder luminance when displaying the viewfinder. 0 When either [AUTO] is set, or the adjusted value is set to positive side, the usage period will shorten.
14. Menu Guide [Setup] menu ¨ [Beep] [IN/OUT] [Beep Volume] [ ] (High)/`[ (Off) ] (Low)/[ ] [AF Beep Volume] [ ] (High)/`[ (Off) ] (Low)/[ ] [AF Beep Tone] `[ [ [E-Shutter Vol] [ ] (High)/`[ (Off) [E-Shutter Tone] `[ [ ] (Pattern 1)/[ ] (Pattern 3) ] (Pattern 1)/[ ] (Pattern 3) ] (Pattern 2)/ ] (Low)/[ ] ] (Pattern 2)/ Sets the beep sounds, AF beep, and electronic shutter sounds.
14. Menu Guide [Setup] menu ¨ [IN/OUT] [Bluetooth] (l 420) [Send Image (Smartphone)] (l 447) [Remote Wakeup] (l 440) [Returning from Sleep Mode] (l 434) [Auto Transfer] (l 437) [Bluetooth] [Location Logging] (l 439) [Auto Clock Set] (l 441) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points used to connect the camera to Wi-Fi networks will be registered automatically.
14. Menu Guide [Setup] menu ¨ [IN/OUT] [BODY]/`[BG] [Battery Use Priority] Selects which battery to use first when the batteries are installed in both the camera and the Battery Grip. 0 For details, refer to page 490. [HDMI Mode (Playback)] `[AUTO]/[4K/50p]/[4K/25p]/[1080p]/ [1080i]/[720p]/[576p] Sets the HDMI output resolution for playback. [AUTO]: Outputs with a resolution suited to the connected TV.
14. Menu Guide [Setup] menu ¨ [IN/OUT] [VIERA Link (CEC)] [ON]/`[OFF] You can use the device remote control to operate the camera when it is connected to a VIERA Link compatible device using an HDMI micro cable. 0 For details, refer to page 476. [Background Color(Playback)] [TV Connection] (Continued) [ ]/`[ ] Sets the color of the bands displayed on the top and bottom or the left and right of images output on a TV or similar display.
14. Menu Guide [Setup] menu ¨ [Save to Custom Mode] [Setting] [C1]/[C2]/[C3-1] to [C3-10] You can register the currently set information of the camera. 0 For details, refer to page 337. [C1]/[C2]/[C3-1] to [C3-10] [Load Custom Mode] Calls up registered Custom mode settings to the selected recording mode and overwrites the current settings with these. 0 For details, refer to page 340. [Limit No.
14. Menu Guide [Setup] menu ¨ [Clock Set] [Others] Sets the date and time. 0 For details, refer to page 54. Sets the time zone. Press 21 to select the time zone and then press to confirm. [Time Zone] or A Current time B Time difference from GMT (Greenwich Mean Time) 0 If you are using Daylight Savings [ ], press 3. (The time will move forward by 1 hour.) To return to the normal time, press 3 again. This optimizes the image sensor and image processing.
14. Menu Guide [Setup] menu ¨ [Others] This set the language displayed on the screen. [Language] 0 If you set a different language by mistake, select [ ] from the menu icons to set the desired language. [Firmware Update]/[Software info] You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Version] [Firmware Update]: Updates firmware. 1 Download the firmware from the site on page 19.
14. Menu Guide [Playback] Menu How to Select an Image(s) in the [Playback] Menu Follow the steps below when the image selection screen is displayed. 0 Images are displayed separately by card slot. To switch the card to display, press [ ] and select the card slot. 0 The only images you can select and edit at one time are those on a single card. When [Single] has been selected 1 Press 21 to select the image. 2 Press or .
14. Menu Guide `: Default settings [Playback] ¨ [Playback Mode] `[Normal Play]/[Picture Only]/[Video Only]/[HLG Only]/ [Rating]/[6K/4K PHOTO]/[Post-Focus] [Playback Mode] Filters the type of images to play back. 0 When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.]. [All]/[Picture Only]/[Video Only]/[HLG Only]/[Rating]/[6K/4K PHOTO]/[Post-Focus] Selects image types and plays them back at regular intervals in order.
14. Menu Guide [Playback] ¨ [Playback Mode] [FILE NAME]/`[DATE/TIME] This sets the order in which the camera displays images during playback. [Picture Sort] [FILE NAME]: Displays images by folder name/file name. [DATE/TIME]: Displays images by recording date. 0 If you insert another card, it may take some time to read all data, therefore pictures may not be displayed in the set order. [ON]/`[OFF] [Magnify from AF Point] Displays the point focused with AF.
14. Menu Guide [Playback] ¨ [Playback Mode] [MODE1]/`[MODE2]/[OFF] [HLG View Assist (Monitor)] At recording or playback of [HLG Photo] and HLG video, this converts their color gamut and brightness for display. 0 This functions in tandem with [Monitor] in [HLG View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. 0 For details, refer to page 282.
14. Menu Guide [Playback] ¨ [Process Image] [RAW Processing] Processes pictures taken in RAW format on the camera and saves them in JPEG format. In addition, RAW images recorded using [HLG Photo] can be saved in HLG format. 0 For details, refer to page 312. [6K/4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 6K/4K burst file all at once. 0 For details, refer to page 144.
14. Menu Guide [Playback] ¨ [Add/Delete Info.] [Single]/[Multi]/[Cancel] [Protect] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will also be deleted. 0 For information about how to select images, refer to page 406. 0 Be careful because the [Protect] setting may be disabled on a device other than this camera.
14. Menu Guide [Playback] ¨ [Edit Image] [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. 0 For information about how to select images, refer to page [Resize] 406. – When [Single] is selected, after choosing the image, press 34 to select the size, then press or . – When [Multi] is selected, before choosing the images, press 34 to select the size, then press or .
14. Menu Guide [Playback] ¨ [Edit Image] [Copy Direction] `[ ]/[ ] [Select Copy]/[Copy All in Folder]/[Copy All in Card] You can copy the images in one of the cards to the other card. 0 Copied images will be saved in a new folder. [Copy] [Select Copy]: Copies selected images. 1 Select the folder containing the images to copy. 2 Select the images. (l 406) [Copy All in Folder]: Copies all images in a folder. 1 Select the folder to copy.
14. Menu Guide [Playback] ¨ [Copy] (Continued) [Playback] ¨ [Edit Image] 0 You can set up to 100 images at once with [Select Copy]. 0 The [Protect] setting is not copied. 0 Copying may take a while.
14. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed. 1 Enter characters. ≥Press 3421 to select characters and then press or until the character to enter is displayed. (Repeat this) 0 To repeatedly enter the same character, 2 rotate or to the right to move the entry position cursor.
15. Wi-Fi/Bluetooth This chapter explains the Wi-Fi® and Bluetooth® functions of the camera. Remote Operations from a Smartphone You can use the “LUMIX Sync” smartphone app for remote recording and image transfers. l 418 Transferring Images from This Camera You can transfer images to another device, such as a smartphone or PC, by operating the camera. l 443 This document refers to both smartphones and tablets as smartphones.
15. Wi-Fi/Bluetooth 0 Do not remove the card or battery or move to an area without any reception while sending images. 0 The camera cannot be used to connect to a public wireless LAN connection. 0 We strongly recommend that you set an encryption to maintain information security. 0 We recommend that you use a sufficiently charged battery when sending images. 0 When the remaining battery level is low, it may not be possible to connect to or maintain communication with other devices.
15. Wi-Fi/Bluetooth Connecting to a Smartphone Connect with a smartphone which has the “Panasonic LUMIX Sync” (below: “LUMIX Sync”) smartphone app installed. Use “LUMIX Sync” for remote recording and image transfers. Flow of connecting a smartphone 1 Install “LUMIX Sync ” on your smartphone. (l 419) Connect to a smartphone.
15. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS 1 2 3 4 Android™: Android 5 or higher iOS: iOS 11 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”. Enter “LUMIX” or “panasonic lumix sync” into the search box. Select and install the “Panasonic LUMIX Sync ” . 0 Use the latest version. 0 Supported OSs are current as of September 2020 and are subject to change.
15. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. 0 For the first-time connection, pairing settings are required. For information about connecting for the second and subsequent times, refer to page 423. 0 Supported smartphones Android™: Android 5 or higher with Bluetooth 4.
15. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. 3 Set the camera to Bluetooth pairing standby state. ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Pairing] ≥The camera enters pairing standby state and the device name A is displayed. ≥ 4 On the smartphone, select the camera’s device name. 0 (iOS devices) When a message to XXXXXXXXXXXX confirm the change of destination is displayed, select [Join].
15. Wi-Fi/Bluetooth End Bluetooth Connection To terminate the Bluetooth connection, turn off the Bluetooth function of the camera. ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ Select [OFF] 0 Even if you terminate the connection, the pairing information for it will not be deleted.
15. Wi-Fi/Bluetooth Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. 1 Enable the Bluetooth function of the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [ON] 2 On the smartphone, start up “LUMIX Sync”. 0 If a message is displayed indicating that the smartphone is searching for cameras, close the message. 3 Select [ ]. 4 Select [Bluetooth Setup]. LUMIX Sync 5 Turn Bluetooth ON. 6 From [Camera registered] items, select the camera’s device name.
15. Wi-Fi/Bluetooth Canceling Pairing 1 Cancel the pairing setting of the camera. ¨[ 0 ]¨[ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [SET] ¨ [Delete] 2 Select the smartphone for which to cancel the pairing. 0 Also cancel the pairing setting on the smartphone. 0 When [Reset] in the [Setup] ([Setting]) menu is used to reset the network settings, the information for registered devices is deleted. Connecting to a Smartphone ([Wi-Fi connection]) Use Wi-Fi to connect the camera and a smartphone.
15. Wi-Fi/Bluetooth 2 3 In the setting menu of the smartphone, turn the Wi-Fi function ON. Wi-Fi Wi-Fi Select the SSID displayed on the camera. XXXXXXXX i i 4 5 On the smartphone, start up “LUMIX Sync”. (At the first connection) Confirm the device name displayed on the camera and then select [Yes]. 0 When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes].
15. Wi-Fi/Bluetooth Using Password Authentication to Connect You can enhance Wi-Fi connection security by using password authentication through either QR code or manual input. Scanning QR code to connect 1 Set [Wi-Fi Password] on the camera to [ON]. 0 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [Wi-Fi Password] ¨ [ON] 2 Display the QR code A.
15. Wi-Fi/Bluetooth Manually entering a password to connect 1 Display the screen in Step 2 on page 426. 2 In the setting menu of the smartphone, Wi-Fi turn the Wi-Fi function ON. Wi-Fi XXXXXXXX i i 3 On the Wi-Fi setup screen, select the SSID B displayed on the camera. 4 (At the first connection) Enter the password B displayed on the camera. 5 On the smartphone, start up “LUMIX Sync”.
15. Wi-Fi/Bluetooth Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: 1 Display the connection method setting screen for the camera. 0 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Remote Shooting & View] 2 Press [DISP.]. Connecting via network 1 Select [Via Network] and then press or . 0 Follow the connection method on page 460 to connect the camera to a wireless 2 3 4 access point.
15. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. 1 Press the shutter button halfway to put the camera in recording mode. 2 Terminate the Wi-Fi connection. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] 0 You can also perform the same operation by pressing the Fn button assigned with [Wi-Fi]. For information about the Fn button, refer to page 321. 0 3 On the smartphone, close the “LUMIX Sync”.
15. Wi-Fi/Bluetooth Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ( Bluetooth ) symbol require a smartphone that supports Bluetooth Low Energy. Home Screen When you start up “LUMIX Sync”, the home screen is displayed. 430 A App settings (l 423, 426, 440) This allows connection settings, camera power operations, and displays Help.
15. Wi-Fi/Bluetooth [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. Getting started: 0 Connect the camera to a smartphone. (l 420, 424) 0 On the smartphone, start up “LUMIX Sync”. 1 2 Select [ ] ([Remote shooting]) in the home screen. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. Start recording.
15. Wi-Fi/Bluetooth Operation Method During Remote Recording Set either the camera or the smartphone as the priority control device to be used during remote recording. ¨[ ]¨[ Remote Device] ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ Select [Priority of [Camera] Operation is possible on both the camera and the smartphone. 0 The camera’s dial settings, etc. cannot be changed with the smartphone. [Smartphone] Operation is possible only on the smartphone. 0 The camera’s dial settings, etc.
15. Wi-Fi/Bluetooth [Shutter Remote Control] Bluetooth You can use the smartphone as a remote control for the shutter. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 420) 0 On the smartphone, start up “LUMIX Sync”. 1 2 Select [ screen. ] ([Shutter Remote Control]) in the home Start recording.
15. Wi-Fi/Bluetooth Shortening the Return Time from [Sleep Mode] You can shorten the time it takes for the camera to return from [Sleep Mode] when the [Shutter Remote Control] is used. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 420) 0 Set [Remote Wakeup] in [Bluetooth] to [ON]. (l 440) ¨[ ]¨[ ] ¨ [Bluetooth] ¨ Select [Returning from Sleep Mode] [Import / Remote Priority] Shortens the time to return when using [Import images] or [Remote shooting].
15. Wi-Fi/Bluetooth [Import images] Transfer an image stored on the card to the smartphone connected via Wi-Fi. Getting started: 0 Connect the camera to a smartphone. (l 420, 424) 0 On the smartphone, start up “LUMIX Sync”. 1 2 Select [ ] ([Import images]) in the home screen. 0 (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. Select the image to transfer. 0 You can switch the card displayed by touching A. 3 Transfer the image. ≥Select [ ].
15. Wi-Fi/Bluetooth 0 When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording. Depending on the smartphone and on the usage conditions, the image quality may deteriorate or the sound may skip during video or picture playback. 0 It is not possible to transfer images with file sizes exceeding 4 GB.
15. Wi-Fi/Bluetooth [Auto Transfer] Bluetooth You can automatically transfer recorded pictures to a smartphone as they are taken. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 420) 1 Enable [Auto Transfer] on the camera. ≥ ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ [ON] 0 If a confirmation screen is displayed on 2 the camera asking you to terminate the Wi-Fi connection, select [Yes] to terminate it.
15. Wi-Fi/Bluetooth To Stop the Automatic Transfer of Images ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Auto Transfer] ¨ Select [OFF] ≥ A confirmation screen is displayed, asking you to terminate the Wi-Fi connection. 0 If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the camera automatically connects to the smartphone via Wi-Fi and Bluetooth when you turn on the camera. Start up the “LUMIX Sync” on the smartphone to connect to the camera.
15. Wi-Fi/Bluetooth [Location Logging] Bluetooth The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: 0 Enable the GPS function on the smartphone. 0 Connect the camera to a smartphone by Bluetooth. (l 420) 1 Enable [Location Logging] on the camera.
15. Wi-Fi/Bluetooth [Remote Wakeup] Bluetooth Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: 1 Connect to a smartphone using Bluetooth. (l 420) 2 Enable [Remote Wakeup] on the camera. 0 ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Remote Wakeup] ¨ [ON] 3 Set the camera on/off switch to [OFF]. 4 On the smartphone, start up “LUMIX Sync”.
15. Wi-Fi/Bluetooth [Auto Clock Set] Bluetooth Synchronize the clock and the time zone setting of the camera with those of a smartphone. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 420) Enable [Auto Clock Set] on the camera.
15. Wi-Fi/Bluetooth [Camera settings copy] Bluetooth This saves the camera’s settings information to the smartphone. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. Getting started: 0 Connect the camera to a smartphone by Bluetooth. (l 420) 1 2 Select [ ] ([Camera settings copy]) in the “ LUMIX Sync” home screen. Save or load settings information.
15. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. 1 Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus. Select the destination (type of the destination device). 2 – – – – – [Smartphone] (l 447) [PC] (l 451) [Cloud Sync.
15. Wi-Fi/Bluetooth Detailed information about connection methods for each destination device is described on pages 447 to 459. Refer to the following pages for the steps common to all devices. – Wi-Fi connections: [Via Network] (l 460)/[Direct] (l 463) – Image send settings (l 466) – Selecting images (l 467) 0 When recording, recording is prioritized so it will take time for sending to complete.
15. Wi-Fi/Bluetooth Images That Can be Sent Images that can be sent differ depending on the destination device. Images that can be sent Destination device [Smartphone] (l 447) [Send Images While Recording] [Send Images Stored in the Camera] JPEG/RAW JPEG/RAW/MP4 [PC] (l 451) JPEG/RAW JPEG/RAW/MP4/MOV/ 6K/4K burst files/ Post-Focus images [Cloud Sync.
15. Wi-Fi/Bluetooth Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 321. [Terminate the Connection] Terminates the Wi-Fi connection. [Change the Destination] Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection.
15. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: 0 Install “LUMIX Sync” on your smartphone. (l 419) 1 Select the method for sending the images on the camera. ≥ 2 3 4 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to [Smartphone]. Connect the camera to a smartphone by Wi-Fi.
15. Wi-Fi/Bluetooth 5 6 7 Select the destination smartphone on the camera. Check the send settings and then press or . 0 To change the send settings of images, press [DISP.]. (l 466) When [Send Images While Recording] is selected: Take pictures. 0[ ] is displayed in the recording screen of the camera while a file is being sent. 0 To end the connection, follow the steps below: ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] When [Send Images Stored in the Camera] is selected: Select an image.
15. Wi-Fi/Bluetooth Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing [Q] during playback. You can also use the menu to connect easily. 0 You can also perform the same operation by pressing the Fn button registered with [Send Image (Smartphone)]. For information about the Fn button, refer to page 321. Getting started: 0 Install “LUMIX Sync” on your smartphone.
15. Wi-Fi/Bluetooth Using the menu to transfer easily ¨[ ]¨[ ] ¨ [Bluetooth] ¨ [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] 0 If [Single Select], press 21 to select the image and then press or execute. 0 If [Multi Select], use the same operation as with “Send multiple images”.
15. Wi-Fi/Bluetooth [PC] Send recorded images to the PC connected with Wi-Fi. Supported OS Windows: Windows 10/Windows 8.1/Windows 8 Mac: OS X v10.5 to v10.11, macOS 10.12 to macOS 10.15 Getting started: 0 Turn on the PC. 0 Create a destination folder for images. 0 If the workgroup of the destination PC has been changed from the standard setting, change the corresponding setting of the camera in [PC Connection].
15. Wi-Fi/Bluetooth 0 Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters. A destination folder may not be created if the account name includes non-alphanumeric characters. 0 When the computer name (NetBIOS name for Mac) contains a space (blank character), etc., it may not be recognized. In that case, we recommend changing the name to one consisting only of 15 or less alphanumeric characters.
15. Wi-Fi/Bluetooth 4 Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). 0 How to enter characters (l 415) 5 Select a folder for storing images. 0 Folders sorted by sent date will be created in the selected folder, and images will be saved there. 6 7 Check the send settings and then press or . 0 To change the send setting, press [DISP.]. (l 466) When [Send Images While Recording] is selected: Take pictures.
15. Wi-Fi/Bluetooth [Printer] You can send images to a PictBridge (wireless LAN)¢-supported printer connected by Wi-Fi for printing. ¢ DPS over IP standard-compliant 1 Select the method for sending images on the camera. ≥ 2 3 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images Stored in the Camera] Set the destination to [Printer]. Connect the camera to a printer by Wi-Fi. ≥Select [Via Network] (l 460) or [Direct] (l 463), and then connect.
15. Wi-Fi/Bluetooth 5 Select and print images. 0 The procedure for selecting images is the same as the one for when the USB connection cable is connected. (l 487) ]. 0 To terminate the connection, press [ 0 For details about PictBridge (wireless LAN-compatible) printers, contact their manufacturers. 0 When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not available.
15. Wi-Fi/Bluetooth [Web service] You can use “LUMIX CLUB” to upload recorded images to web services such as social networking sites. Getting started: 0 Register with “LUMIX CLUB”. (l 469) 0 Before sending images to a service, register that web service. (l 471) 1 Select the method for sending images on the camera. ≥ 2 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New Connection] ¨ [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to [Web service].
15. Wi-Fi/Bluetooth 5 Check the send settings and then press 6 When [Send Images While Recording] is selected: or . 0 To change the send settings of images, press [DISP.]. (l 466) Take pictures. 0[ ] is displayed in the recording screen of the camera while a file is being sent. 0 To end the connection, follow the steps below: ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes] When [Send Images Stored in the Camera] is selected: Select an image. 0 To end the connection, select [Exit].
15. Wi-Fi/Bluetooth [Cloud Sync. Service] This camera can automatically transfer recorded images to a cloud sync service via “LUMIX CLUB” to send them to a PC or smartphone. To use [Cloud Sync. Service] (As of September 2020) 0 You need to register to the “LUMIX CLUB” (l 469) and set up cloud synchronization to send images to a cloud folder. To set up cloud synchronization, use “PHOTOfunSTUDIO”. 0 Sent images are temporarily saved in the cloud folder.
15. Wi-Fi/Bluetooth 3 Connect to the cloud sync service. ≥Select [Via Network] and then connect. (l 460) 4 5 Check the send settings and then press or . 0 To change the send settings of images, press [DISP.]. (l 466) When [Send Images While Recording] is selected: Take pictures. 0[ ] is displayed in the recording screen of the camera while a file is being sent.
15. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] ([IN/OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings. [Via Network] Connect the camera and destination device through the wireless access point.
15. Wi-Fi/Bluetooth [WPS (Push-Button)] Example) Press the WPS button on the wireless access point to set up a connection. Press the wireless access point WPS button until it switches to WPS mode. [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. 1 On the camera screen, select the wireless access point you are connecting to. 2 Enter the PIN code displayed on the camera screen into the wireless access point. or 3 Press of the camera.
15. Wi-Fi/Bluetooth Connecting by Manual Input 0 Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. 1 In the screen in Step 1 of “[From List]”, select [Manual Input]. (l 461) 2 Enter the SSID of the wireless access point you are connecting to, and then select [Set]. 0 How to enter characters (l 415) 3 Select the network authentication.
15. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. [WPS Connection] [Manual Connection] [WPS (Push-Button)] Press the WPS button on the destination device to connect. 0 On the camera, press [DISP.] to extend the connection wait time. [WPS (PIN code)] Enter the PIN code into the camera, and connect. Search for the camera on the destination device to connect.
15. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. 1 Display the Wi-Fi connection history. ≥ 2 ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination from History]/[Select a destination from Favorite] Select the History item to connect to. 0 Press [DISP.] to confirm details of the connection history. Register to Favorite You can register the Wi-Fi connection history to Favorite.
15. Wi-Fi/Bluetooth Editing Items Registered in Favorite 1 Display items registered to Favorite. 0 ¨[ ]¨[ from Favorite] ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Select a destination 2 Select the History item to edit in Favorite and then press 1. [Remove from Favorite] — [Change the Order in Favorite] Specify the destination location of the desired item to change the display order. [Change the Registered Name] Enter characters to change the registered name.
15. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. 1 2 After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings. [Size] Resize the image to send. [Original]/[Auto]/[Change] ([L], [M], [S], or [VGA]) 0 The [Auto] image size changes depending on the status of the destination device.
15. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. 1 2 Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting 1 Press 21 to select an image. 2 Press or . 6HW [Multi Select] setting 1 Press 3421 to select an image and then press or . (Repeat this) 0 To cancel the setting, press or again. 0 Images are displayed separately by card slot. To switch the card to display, press [ ].
15. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. ≥ ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] [Priority of Remote Device] This sets either the camera or the smartphone as the priority control device to be used during remote recording. (l 432) [Wi-Fi Password] You can use a password to connect for enhanced security.
15. Wi-Fi/Bluetooth To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password. [Wi-Fi Function Lock] [Network Address] [Setup]: Enter any 4-digit numbers as the password. 0 How to enter characters (l 415) [Cancel]: Cancel the password. 0 Once a password is set, you are required to enter it each time you use the Wi-Fi function.
15. Wi-Fi/Bluetooth Acquire a New Login ID from the Camera From the camera menu, acquire a “LUMIX CLUB” login ID. 1 Follow the menu path. ¨[ ]¨[ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [LUMIX CLUB] ¨ [Set/Add Account] ¨ [New account] 0 Connect to the network. Proceed to the next page by selecting [Next]. 0 2 Select and set the method for connecting to a wireless access point, and set. (l 460) 0 Except for the first-time connection, the camera will connect to the previously-used wireless access point.
15. Wi-Fi/Bluetooth Register a Web Service with “LUMIX CLUB” 0 Confirm web services supported by “LUMIX CLUB” in “FAQ/Contact us” at the following site: https://lumixclub.panasonic.net/eng/c/lumix_faqs/ Getting started: 0 Make sure that you have created an account on the web service you want to use, and have the login information available. 1 Connect to the “LUMIX CLUB” site using a smartphone or PC. https://lumixclub.panasonic.net/eng/c/ 2 Enter your “LUMIX CLUB” login ID and password to log in.
15. Wi-Fi/Bluetooth Checking the “LUMIX CLUB” Terms of Use Check the details if the terms of use have been updated, for example. ¨[ ]¨[ [Terms of use] ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [LUMIX CLUB] ¨ Select Deleting Your Login ID and Closing Your “LUMIX CLUB” Account Delete the login ID from the camera when transferring it to another party or disposing of it. You can also close your “LUMIX CLUB” account. 0 You can only change or delete the login ID acquired with the camera. 1 Follow the menu path.
16. Connecting to Other Devices This chapter describes connections with other devices, such as TVs and PCs. Connect using either the [HDMI] socket or the USB port on the camera. Refer to the sections below for more details about connections. 0 Check the direction of the terminals and plug in/out straight holding onto the plug. (Inserting these at an angle may cause deformation or malfunction) 0 Do not connect the cable to the wrong terminals. This may cause a malfunction.
16. Connecting to Other Devices USB port Use a USB connection cable to connect the camera to a PC, recorder, or printer. 0 Do not use any other USB connection cables except the supplied one.
16. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: 0 Turn off the camera and TV. 1 2 3 4 5 Connect the camera and TV with a commercially available HDMI micro cable. (l 473) Turn on the TV. Switch the TV input to HDMI input. Turn on the camera. Display the playback screen. ≥Press [(]. ≥The recorded images are displayed on the TV. (The monitor and viewfinder of the camera will turn off.
16. Connecting to Other Devices 0 With the default settings, pictures are output at the optimal resolution for the connected TV. The output resolution can be changed in [HDMI Mode (Playback)]. (l 401) 0 Depending on the aspect ratio, gray bands may be displayed on the top and bottom or the left and right of images. You can change the band color in [Background Color(Playback)] in [TV Connection] of the [Setup] ([IN/OUT]) menu.
16. Connecting to Other Devices 1 Connect the camera to a Panasonic TV compatible with VIERA Link using a commercially available HDMI micro cable. (l 473) 2 Turn on the camera. 3 Turn on the VIERA Link. 0 ¨[ ]¨[ ] ¨ [TV Connection] ¨ [VIERA Link (CEC)] ¨ [ON] 4 Display the playback screen. 0 Press [(]. 5 Operate with the remote control for the TV. Power off link If you turn off the TV with its remote control, the camera will also turn off.
16. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. When using Windows, you can also copy using the “PHOTOfunSTUDIO” software for LUMIX. You can also use software to perform operations such as organizing and correcting recorded images, processing RAW images, and editing videos. (l 480) Copying Images to a PC After connecting to the PC, you can copy the recorded images by dragging files and folders on this camera to the PC.
16. Connecting to Other Devices Getting started: 0 Turn on the camera and PC. 1 2 3 Connect the camera and PC with the USB connection cable. (l 474) Press 34 to select [PC(Storage)] and then press . or ≥Windows: A drive (“LUMIX”) is displayed in [This PC]. ≥Mac: A drive (“LUMIX”) is displayed on the desktop. Drag the files and folders from the camera to the PC. Folder Structure Inside Card LUMIX AD_LUMIX CAMSET DCIM 100XXXXX PXXX0001.
16. Connecting to Other Devices Copying Images to a PC Using “PHOTOfunSTUDIO” Getting started: 0 Turn on the camera and PC. 0 Install “PHOTOfunSTUDIO” on PC. (l 480) 1 Connect the camera and PC with the USB connection cable. (l 474) 2 Press 34 to select [PC(Storage)] and then press or . 3 Copy images to the PC using “PHOTOfunSTUDIO”. 0 Do not delete or move the copied files and folders in, for example, Windows Explorer. Playback and editing using “PHOTOfunSTUDIO” will become no longer possible.
16. Connecting to Other Devices PHOTOfunSTUDIO 10.1 PE This software allows you to manage your images. For example, it allows you to import pictures and videos to your PC and then sort them by recording date, model name. You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs101pe.
16. Connecting to Other Devices SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software: http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows Windows 10, Windows 8.1 (64-bit recommended) Mac OS X v10.10 to v10.11 macOS 10.12 to macOS 10.
16. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: 0 Turn on the camera and recorder. 0 Insert a card into card slot 1. 1 2 3 Connect the camera and recorder with the USB connection cable. (l 474) Press 34 to select [PC(Storage)] and then press . or Operate the recorder to store the images.
16. Connecting to Other Devices Tethered Recording If you install the “LUMIX Tether” camera control software on your PC, you can connect the camera to the PC via USB and then control the camera from the PC and record while checking the live view on the PC screen (tethered recording). In addition, you can output via HDMI to an external monitor or TV during tethered recording. Installing Software “LUMIX Tether” This software is for controlling the camera from a PC.
16. Connecting to Other Devices Operating the Camera from a PC Getting started: 0 Turn on the camera and PC. 0 Install “LUMIX Tether” on PC. 1 2 3 Connect the camera and PC with the USB connection cable. (l 474) Press 34 to select [PC(Tether)] and then press . ≥[ or ] is displayed on the camera’s screen. Use “ LUMIX Tether” to operate the camera from the PC.
16. Connecting to Other Devices Printing If you connect the camera to a printer that supports PictBridge, you can select pictures on the camera’s monitor and then print them. Getting started: 0 Turn on the camera and printer. 0 Set the print quality and other settings on the printer. 1 Play back the card that contains the picture you want to print. ≥Press [(]. ≥After pressing [ ], press 34 to select [Card Slot 1] or [Card Slot 2], and then press or .
16. Connecting to Other Devices 4 Press 21 to select a picture and then press or . PictBridge ≥To print multiple pictures, press 3, set the picture selection method, and then select pictures. 0XOWL 3ULQW 3ULQW [Multi Select] Selects the picture to print. 1 Press 3421 to select a picture and then press or . 2 [Select All] [Rating] 0 To cancel the setting, press Press [DISP.] to end selection. or again. Prints all the stored pictures. Prints all pictures with [Rating] levels from [¿1] to [¿5].
16. Connecting to Other Devices Setting Items (Print Settings) [Print start] Starts printing. [Print with Date] Sets printing with date. 0 If the printer does not support printing with date, the date cannot be printed. [Num.of prints] Sets the number of prints to be printed (up to 999). [Paper Size] [Page Layout] 488 Sets the paper size. Sets whether to add borders and how many images to be printed on each sheet of paper.
16. Connecting to Other Devices 0 If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (l 400) 0 Take care not to turn off the camera while printing is in progress. 0 When connecting with the printer is not possible, set [USB Power Supply] to [OFF] and then try connecting again.
17. Materials Using Optional Accessories 0 For information on the external flash, refer to page 227. 0 For information on the external microphone, refer to page 293. 0 For information on the XLR Microphone Adaptor, refer to page 296. 0 Some optional accessories may not be available in some countries. Battery Grip (Optional) When mounted on the camera, the Battery Grip (DMW-BGS5: optional) improves ease of operation and grip when the camera is held vertically.
17. Materials 0 When the battery in the Battery Grip is used, [ ] is displayed on the monitor. 0 You can register functions of your choice to the [Fn] button on the Battery Grip. (l 321) The [WB] button, [ISO] button, [ ] button, [AF ON] button, and joystick each work the same as the buttons and joystick on the camera body. 0 Refer to the operating instructions for the Battery Grip for details.
17. Materials Tripod Grip (Optional) Attach a Tripod Grip (DMW-SHGR1: optional) to use it as a grip for recording while walking, a tripod, or a Shutter Remote Control. 0 Connect the grip cable to the [REMOTE] socket on the camera. 0 Always use a genuine Panasonic Tripod Grip (DMW-SHGR1: optional). 0 The [Video Rec. Button (Remote)] menu does not work with the Tripod Grip. 0 Do not carry just by holding the hand strap when the camera is attached.
17. Materials Monitor/Viewfinder Displays 0 The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to [ ]. Recording Screen BKT HLG 4K AWB RAW + FINE L AFS GPS APS-C Fn3 Fn4 MINI Fn5 Fn6 OFF 24m59s AEL BKT 60 F3.
17.
17. Materials 4 BKT F3.
17.
17. Materials Control Panel 1/60 F3.5 ISO 100 AFS 0 0 0 FINE 3:2 AWB 1 Fn 999 999 3 Recording mode (l 60) 1/60 Shutter speed (l 59) F3.
17. Materials 4 Photo Style (l 208) AWB White balance (l 202) i.
17. Materials Playback Screen 2020.12.1 10:00 100-0001 3 1/999 8m30s GPS 60 F3.5 ±0 FINE L ISO100 1 2 Playback mode (l 407) 2020.12.
17.
17. Materials Detailed information display AFS 3:2 L ISO 100 STD. 0 Photo Style display 1/5 FINE sRGB 1 5500 ISO F3.5 60 3/5 100 0 2020.12. 1 10:00 2020.12. 1 10:00 100-0001 1 2 3 4 5 0 F3.5 60 100-0001 White balance display Card slot (l 46) Recording date and time (l 54) Folder/file number (l 479) Recording information (basic) Recording information (advanced) 4/5 1 5500K ISO 100 0 G A B F3.5 60 M 2020.12.
17. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. Card [Memory Card Error]/[Format this card?] 0 It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (l 48) [Memory Card Error]/[This memory card cannot be used] 0 Use a card compatible with the camera. (l 24) [Insert memory card again.]/[Try another card] 0 Unable to access the card. Reinsert the card.
17. Materials Lens [The lens is not attached properly. Do not push lens release button while lens is attached.] 0 Remove the lens once, and then attach it again without pressing the lens release button. (l 49) Turn on the camera again, and if it is still displaying, contact the dealer. [Lens attachment failed. Please make sure the lens is attached correctly.] 0 Remove the lens from the camera body and gently wipe the contacts on the lens and the camera body using a dry cotton swab.
17. Materials Others [Some pictures cannot be deleted]/[This picture cannot be deleted] 0 Images that do not comply with the DCF standard cannot be deleted. Back up any necessary data before formatting the card. (l 48) [A folder cannot be created] 0 The maximum number of folder numbers has been reached, so new folders cannot be created. After formatting the card, execute [File Number Reset] in the [Setup] ([Card/File]) menu.
17. Materials Troubleshooting First, try out the following procedures (l 505 to 515). If the problem is not resolved, it may be improved by selecting [Reset] (l 76) on the [Setup] ([Setting]) menu. Power, Battery The camera turns off automatically. 0 [Power Save Mode] is enabled. (l 44) The battery becomes flat too quickly. 0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster. Set these settings only when recording. 0 When connected to Wi-Fi, the battery drains quickly.
17. Materials Cannot record images. The shutter will not operate immediately when the shutter button is pressed. 0 If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until focus is achieved. (l 373) The recorded image is whitish. 0 Images may look whitish when the lens or image sensor gets dirty with fingerprints or similar. If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry cloth.
17. Materials The recorded image looks rough. Noise appears on the picture. 0 Try the following: – Reduce the ISO sensitivity. (l 199) – Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (l 211) – Set [Long Exposure NR] to [ON]. (l 351) The subject appears distorted on the image. 0 When a moving subject is recorded while using the following functions, the subject may appear distorted in the picture: – [ELEC.
17. Materials Stripes appear in high ISO sensitivity. 0 Stripes may appear in high ISO sensitivity or depending on the lens you use. Decrease the ISO sensitivity. (l 199) The brightness or coloring of the recorded image is different from the actual scene. 0 When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or coloring. These are a result of the characteristics of the light source and do not indicate a malfunction.
17. Materials Video Cannot record videos. 0 When using a large capacity card, you may not be able to record for a while after turning on the camera. Video recording stops in the middle. 0 Recording video requires a card of a supported speed class. Use a compatible card. (l 25) In videos, abnormal clicking and buzzing sounds are recorded. The recorded audio is very quiet. 0 Depending on the recording conditions or the lens used, the sound of aperture and focus actions may be recorded in videos.
17. Materials Playback Cannot play back. There are no recorded pictures. 0 Folders and images processed on a PC cannot be played on the camera. We recommend using the software “PHOTOfunSTUDIO” to write images from the PC to the card. 0 Some images are not displayed when the [Playback Mode] is set. Set to [Normal Play]. (l 407) Red part of the recorded image has changed color to black. 0 When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
17. Materials Monitor/Viewfinder The monitor/viewfinder turns off when the camera is turned on. 0 If no operations are performed during the set time period, [Auto LVF/Monitor Off] (l 44) is activated, and the monitor/viewfinder turns off. 0 When an object or your hand is positioned near the eye sensor, the monitor display may switch to the viewfinder display. It may flicker for an instant or the brightness of the screen may change significantly for an instant.
17. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection 0 Use within the communication range of the device to be connected. 0 Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost. Use the camera at a sufficient distance from these devices.
17. Materials Cannot connect with a wireless access point. 0 The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (l 462) 0 Radio waves from other devices may block the connection to a wireless access point. Check the status of other devices that are connected to the wireless access point as well as the status of other wireless devices. Wi-Fi connection on an iOS device fails.
17. Materials The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function. 0 At the time of purchase, this camera is set to use a workgroup name of “WORKGROUP”. If you have changed the workgroup name of the PC, this will not be recognized. In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC to which to connect. (l 468) 0 Check that the login name and password are correctly typed.
17. Materials TV, PC, Printer The TV images are displayed with gray bands. 0 Depending on the [Aspect Ratio], gray bands may be displayed on the top and bottom or the left and right of the images. You can change the band color in [Background Color(Playback)] in [TV Connection] of the [Setup] ([IN/OUT]) menu. (l 402) Images cannot be imported even when connected to a PC. 0 Set the [USB Mode] of the camera to [PC(Storage)]. (l 400) 0 Turn the camera off and on.
17. Materials Cautions for Use The Camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). 0 If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. 0 Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
17. Materials Cleaning Before cleaning the camera, remove the battery or the DC Coupler, and disconnect the power plug from the electrical outlet. Then wipe the camera with a dry, soft cloth. 0 When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. 0 Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
17. Materials Removing dirt on the image sensor The image sensor is very precise and delicate, so be sure to observe the following when you do have to clean it yourself. 0 Blow dust off the surface of the image sensor using a commercially available blower. Do not blow the dust off with excessive power. 0 Do not put the blower further inside than the lens mount. The blower can scratch the image sensor if it touches. 0 Do not use any objects except a blower to clean the image sensor.
17. Materials Monitor/Viewfinder 0 Do not push hard on the monitor. This may cause irregular coloration or malfunction. 0 Extremely high precision technology is employed to produce the monitor/viewfinder screen. However there may be some dark or bright spots, or spots that light constantly (red, blue, or green) on the screen. This is not a malfunction. Though the monitor/viewfinder screen parts are produced with highly controlled precision technology, some pixels may be inactive or always lit.
17. Materials Battery The battery is a rechargeable lithium ion battery. It is highly sensitive to temperature and humidity, and the effect on performance increases as the temperature rises or drops. Always remove the battery after use. 0 Place the removed battery in a plastic bag, etc., and keep away from metallic objects (clips, etc.) for storage or transport. If you drop the battery accidentally, check to see if the body of the battery and the contacts are deformed.
17. Materials Charger, AC Adaptor 0 The charging lights may blink under the influence of 0 0 0 0 static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging. If you use the AC adaptor near a radio, the radio reception may be disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from radio. During usage, the AC adaptor may emit an electrical hum; this is not a malfunction.
17. Materials Personal Information Personal information is stored within the camera and in recorded images. We recommend that you enhance security by setting a Wi-Fi password and Wi-Fi function lock to protect personal information. (l 468, 469) 0 Images may contain information that can be used to identify the user, such as recording dates and times, and location information. Confirm details carefully before uploading images to a web service.
17. Materials When Not Using the Camera for a Long Period of Time 0 Ensure you remove the battery and card from the camera. 0 0 0 0 If the battery is left in the camera, it may over-discharge, and be rendered unusable even after charging. Store the battery in a cool and dry place with a relatively stable temperature.
17. Materials Wi-Fi Function Use the camera as a wireless LAN device. When using devices or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using the camera for any purpose other than as a wireless LAN device. Use of the Wi-Fi function of the camera is presumed to be in countries where it is sold.
17. Materials Number of Pictures That Can Be Taken and Available Recording Time with the Battery Listed below are the numbers of pictures that can be taken and the time lengths available for recording when the supplied battery is being used. 0 The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. 0 Using a Panasonic SDHC memory card. 0 Using the interchangeable lens (S-R2060). 0 The values listed are approximate.
17.
17. Materials Playback (When Using the Monitor) Playback time (minutes) 280 0 The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions. For example, these will reduce in the following case: – In low-temperature environments, such as on ski slopes. 0 If the usage duration drops significantly even when the battery is fully charged, then the battery is at the end of its service life. Replace with a new battery.
17. Materials Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. 0 The values listed are approximate. Number of Still Images That Can Be Taken 0 [Aspect Ratio]: [3:2]; [Picture Quality]: [FINE] [Picture Size] Card capacity 32 GB 64 GB [L] (24M) 2460 4940 128 GB 9780 [M] (12M) 4520 8980 17790 [S] (6M) 7940 15440 30570 [Full-Res.
17. Materials Video Recording Time 0 “h” is an abbreviation for hour, “m” for minute and “s” for second. 0 Video recording time is the total time of all the videos which have been recorded. 0 [Rec.
17. Materials 0 [Rec.
17.
17. Materials Menu [Photo]: Default setting [Focus] [AF Custom Setting(Photo)] [Set 1] 3 3 3 [AF Assist Light] [ON] 3 3 3 [ON]/[OFF] [ON] 3 3 3 [SET] — 3 3 3 [FAST] 3 3 3 [Flash Mode] [‰] 3 3 3 [Firing Mode] [TTL] 3 3 3 [Flash Adjust.] [±0 EV] 3 3 3 [Flash Synchro] [1ST] 3 3 3 [Manual Flash Adjust.] [1/1] 3 3 3 [Auto Exposure Comp.
17. Materials Menu Default setting [Burst Shot 1 Setting] [H] [Burst Shot 2 Setting] [ [Shutter Type] 3 3 3 3 3 3 [MECH.] 3 3 3 [Shutter Delay] [OFF] 3 3 3 [Ex. Tele Conv.
17. Materials Menu Default setting [Flicker Decrease (Video)] [OFF] 3 3 3 [i.Dynamic Range] [OFF] 3 3 3 [Vignetting Comp.
17. Materials Menu [Video]: Default setting [Focus] [ON]/[OFF] [OFF] 3 3 3 [SET] — 3 3 3 [Continuous AF] [MODE1] 3 3 3 [AF Assist Light] [ON] 3 3 3 [ON]/[OFF] [ON] 3 3 3 [SET] — 3 3 3 [FAST] 3 3 3 [Sound Rec Level Disp.] [OFF] 3 3 3 [Sound Rec Level Adj.] [0dB] 3 3 3 [Sound Rec Level Limiter] [ON] 3 3 3 [Wind Noise Canceller] [STANDARD] 3 3 3 [Wind Cut] [OFF] 3 3 3 [Mic Socket] [ 3 3 3 [Special Mic.
17. Materials Menu [Custom]: [Photo Style Settings] Default setting [Image Quality] [Show/Hide Photo Style] — 3 3 3 [My Photo Style Settings] — 3 3 3 [Reset Photo Style] — [ISO Increments] [1/3 EV] 3 3 3 [Extended ISO] [OFF] 3 3 3 [Multi Metering] [n0EV] 3 3 3 [Center Weighted] [n0EV] 3 3 3 [Spot] [n0EV] 3 3 3 [Highlight Weighted] [n0EV] 3 3 3 [Color Space] [sRGB] 3 3 [Exposure Comp. Reset] [OFF] 3 [Auto Exposure in P/A/S/M] [ON] [Exposure Offset Adjust.
17. Materials Menu [Custom]: Default setting [Focus/Shutter] [AFS] [FOCUS] 3 3 3 [AFC] [BALANCE] 3 3 3 [Focus Switching for Vert / Hor] [OFF] 3 3 3 [AF/AE Lock Hold] [OFF] 3 3 3 [AF+MF] [OFF] 3 3 3 [Focus Ring] [ON] 3 3 3 [AF Mode] [ON] 3 3 3 [Press Joystick] [OFF] 3 3 3 [MF Assist Display] [PIP] 3 3 3 [Focus/Shutter Priority] [MF Assist] [MF Guide] [ ] 3 3 3 [Focus Ring Lock] [OFF] 3 3 3 [Face/Eye/Body/Animal Detect.
17.
17. Materials Menu [Dial Set.] Default setting [Assign Dial (F/SS)] [SET1] [Rotation (F/SS)] [ [Control Dial Assignment] [ 3 3 3 3 3 3 ] 3 3 3 [Exposure Comp.] [OFF] 3 3 3 [Dial Operation Switch Setup] — 3 3 3 [Rotation (Menu Operation)] [ ] ] 3 3 3 [Joystick Setting] [D.FOCUS Movement] 3 3 3 [Video Rec.
17. Materials Menu Default setting [Expo.Meter] [OFF] 3 3 3 [Focal Length] [ON] 3 3 3 [Photo/Video Preview] [ 3 3 3 [Photos/Videos Remaining] [ 3 3 3 [Blinking Highlights] [OFF] 3 3 3 [ON]/[OFF] [OFF] 3 [SET] [Sheer Overlay] ] ] — 3 [I.S.
17.
17. Materials Menu Default setting [Monitor Frame Rate] [60fps] 3 3 [LVF Frame Rate] [60fps] 3 3 [Monitor Settings]/[Viewfinder] — 3 [Monitor Backlight]/[LVF Luminance] [Eye Sensor] [Level Gauge Adjust.] [Setup]: [AUTO] 3 3 [Sensitivity] [HIGH] 3 3 [LVF/Monitor Switch] [LVF/MON AUTO] 3 3 [Adjust.
17. Materials Menu [Setup]: Default setting [Setting] [Save to Custom Mode] — 3 3 [Load Custom Mode] — 3 3 [3] 3 3 [Edit Title] — 3 3 [How to Reload Custom Mode] — 3 3 [Select Loading Details] — 3 3 [Save] — [Load] — [Delete] — [Keep Settings While Format] [OFF] 3 3 [Limit No.
17. Materials Menu [My Menu]: Default setting [Edit My Menu] [Add] — [Sorting] — [Delete] — 3 3 [OFF] 3 3 [Playback Mode] [Normal Play] 3 3 [Slide Show] — 3 3 [Rotate Disp.
17.
17. Materials Menu [ON]/[OFF] [Focus Peaking] [SET] [1-Area AF Moving Speed] [Photo]: iA P A S M 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 [Flash] [Flash Mode] 3 3 3 3 [Firing Mode] 3 3 3 3 [Flash Adjust.] 3 3 3 3 [Flash Synchro] 3 3 3 3 [Manual Flash Adjust.] 3 3 3 3 [Auto Exposure Comp.
17. Materials iA P A S M [Burst Shot 1 Setting] Menu 3 3 3 3 3 [Burst Shot 2 Setting] 3 3 3 3 3 [Shutter Type] 3 3 3 3 3 [Shutter Delay] 3 3 3 3 3 [Ex. Tele Conv.
17. Materials Menu iA P A S M [Image Area of Video] 3 3 3 3 3 3 [Rec Quality] 3 3 3 3 3 3 [Video]: S&Q [Image Format] [Slow & Quick Setting] [Switch NTSC/PAL] 3 3 3 3 3 3 [Rec.
17. Materials Menu [Video]: [Silent Mode] [Image Stabilizer] [Live Cropping] iA P A S M S&Q [Others (Video)] 3 3 3 3 3 3 3 [Operation Mode] 3 3 3 3 3 3 3 [Body(B.I.S.) / Lens(O.I.S.)] 3 3 3 3 3 3 3 [When to Activate] 3 3 3 3 3 [E-Stabilization (Video)] 3 3 3 3 3 3 [Boost I.S.
17. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-S5): Information for your safety Power source: Power consumption: 8.4 V 4.3 W (when recording with the monitor), 3.
17. Materials Recording format for still images File format for still images JPEG (DCF compliant, Exif 2.31 compliant) / RAW / HLG photo (CTA-2072 compliant) File format for 6K/4K 6K photo: MP4 (H.265/HEVC, AAC (2ch)) photos 4K photo: MP4 (H.
17. Materials Picture size (pixels) When the aspect ratio setting is [1:1] [L]: 4000k4000 (2656k2656)¢ [M]: 2848k2848 (1920k1920)¢ [S]: 2016k2016 (1376k1376)¢ [High Resolution Mode] ([XL]): 8000k8000 [High Resolution Mode] ([LL]): 5664k5664 4K photo: 2880k2880 (2880k2880)¢ [HLG Photo] ([Full-Res.]): 4000k4000 [HLG Photo] ([4K-Res.
17. Materials Recording format for video Video format MP4 (H.264/MPEG-4 AVC, H.265/HEVC) / MOV (H.264/MPEG-4 AVC, H.265/HEVC) Audio format MP4 AAC (2ch) MOV LPCM (2ch, 48 kHz/16-bit) Image quality for video Refer to page 250 and 285 in this document for information about resolution, recording frame rate, and other elements of recording quality.
17. Materials Viewfinder System Aspect ratio 4:3, 0.39 inches, approx. 2,360,000 dots, organic EL (OLED) live view viewfinder Field of view ratio Approx. 100 % Magnification Approx. 0.74k (j1.0 mj1 50 mm at infinity, with aspect ratio set to [3:2]) Eye point Approx. 20.0 mm (at j1.0 mj1) Diopter adjustment range j4.0 to i4.0 diopter Eye sensor Yes Monitor System Aspect ratio 3:2, 3.0 inches, approx. 1,840,000 dots monitor, capacitive touch screen Field of view ratio Approx.
17. Materials Exposure control Light metering 1728-zone metering, multi-metering / center-weighted system, metering / spot metering / highlight-weighted metering Light metering mode Metering range EV 0 to EV 18 (F2.
17. Materials Shutter Format Focal-plane shutter Shutter speed Pictures: Mechanical shutter: Bulb (max. approx. 30 minutes), 60 seconds to 1/8000 of a second Electronic front curtain: Bulb (max. approx. 30 minutes), 60 seconds to 1/2000 of a second Electronic shutter: Bulb (max. approx.
17. Materials Maximum number of [FINE] / [STD.]: 999 frames or more frames recordable [RAWiFINE] / [RAWiSTD.] / [RAW]: 24 frames or more (When recording is performed under the test conditions specified by Panasonic (Using a card in card slot 1 compatible with UHS-II)) Zoom Extended Tele Conversion (Picture) Max. 2k¢ (when a picture size of [S] is selected.) ¢ Max. 1.9k when using APS-C lenses Microphone / Speaker Microphone Stereo Speaker Monaural Interface USB USB Type-C™, SuperSpeed USB3.
17. Materials External dimensions / Mass External dimensions Approx. 132.6 mm (W)k97.1 mm (H)k81.9 mm (D) (5.22q (W)k3.82q (H)k3.22q (D)) (excluding the projecting parts) Mass Approx. 714 g/1.58 lb (camera body, with battery and one card) Approx. 630 g/1.
17. Materials 35 mm full-frame interchangeable lens: S-R2060 “LUMIX S 20-60 mm F3.5-5.6” Mount Leica Camera AG L-Mount Focal length f=20 mm to 60 mm Lens construction 11 elements in 9 groups (2 aspherical lenses, 3 ED lenses, 1 UHR lens) Aperture type 9 diaphragm blades/Circular aperture diaphragm Maximum aperture F3.5 (Wide) to F5.6 (Tele) Minimum aperture value F22 Angle of view 94o (Wide) to 40o (Tele) In focus distance 0.15 m (0.49 feet) to ¶ (Wide to focal length 26 mm)/ 0.4 m (1.
Index Numerics 1 Shot "6K/4K PHOTO"...................... 326 1 Shot RAW+JPG .............................. 325 1 Shot Spot Metering ......................... 325 1-Area (AF) ........................................ 110 1-Area AF Moving Speed................... 356 1-Area+ (AF) ...................................... 110 225-Area (AF) .................................... 107 4K/50p Bit Mode ....................... 292, 393 4K/60p Bit Mode ....................... 292, 393 6K/4K Burst..........................
Index Burst rate ........................................... 130 Burst Shot .......................................... 129 Burst Shot 1 Setting .......... 129, 133, 359 Burst Shot 2 Setting .......... 129, 133, 359 C Calendar screen................................. 309 Card ................................ 24, 46, 88, 521 Card Access Light ................................ 46 Card Format................................ 48, 395 Card Slot Change ..................... 302, 328 Center Marker ..................
Index External microphone .......................... 293 External monitor/external recorder..... 289 Eye cup .............................................. 518 Eye Sensor ................................. 66, 398 Eye Sensor AF................................... 376 F Face/Eye/Body/Animal Detect. ... 79, 102 File number ................. 89, 479, 499, 501 File Number Reset ...................... 91, 395 Filter Effect................................ 215, 355 Filter Settings ............................
Index Intelligent Auto mode ........................... 77 iOS ..................................................... 419 ISO Displayed Setting ........................ 379 ISO Increments .................................. 370 ISO sensitivity .................................... 199 ISO Sensitivity (photo) ....................... 352 ISO Sensitivity (video)............... 262, 364 J Joystick ................................................ 63 Joystick Setting .................................. 381 K Knee.
Index Number of pictures that can be taken continuously ....................................... 131 Number of prints ................................ 488 Number of still images that can be taken ........................................................... 528 O One Push AE ..................................... 325 Online Manual.................................... 405 Operation Lock................................... 326 Operation Lock Setup ........................ 378 Optical zoom ........................
Index Resize ................................................ 412 Restore to default...................... 327, 328 Returning from Sleep Mode ...... 400, 434 Rotate ................................................ 412 Rotate Display.................................... 407 S Saturation........................................... 211 Save to Custom Mode .............. 337, 403 Save/Restore Camera Setting .................................................. 343, 403 SD Speed Class...............................
Index U UHS Speed Class ................................ 25 USB.................................................... 400 USB connection cable ..... 35, 39, 474, 479, 480, 483, 485, 486 USB Mode.......................................... 400 USB port ..................................... 39, 474 USB Power Supply ............................ 400 V Vertical orientation detection function ............................................................. 58 Video Divide..............................
Trademarks and Licenses 0 L-Mount is a trademark or registered trademark of Leica Camera AG. 0 SDXC Logo is a trademark of SD-3C, LLC. 0 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo 0 0 0 0 0 0 0 are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc.
Trademarks and Licenses 0 Final Cut Pro, Mac, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. 0 App Store is a service mark of Apple Inc. 0 Google, Android and Google Play are trademarks of Google LLC. 0 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth 0 0 0 0 0 0 0 SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
Trademarks and Licenses This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Firmware Update Firmware Has Been Updated A firmware update has been made available to improve camera capabilities and to add functionality. The subsequent sections describe functions that have been added or modified. Also refer to the “Operating Instructions”. 0 To check the firmware version of the camera, select [Firmware Version] in the [Setup] ([Others]) menu. 0 For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.
Contents Before Use F-3 About Applications/Software ............................................................F-3 Firmware Ver. 2.0 F-4 Additions/Changes to AF Functions ........................................ F-4 Automatic Detection AF Has Been Added to [1-Area+]/[1-Area]......F-4 Support for the [AF+MF] Function During Recording of Video.........F-5 Additions/Changes to Video Functions.................................... F-6 C4K Recording Qualities Have Been Added ................................
Before Use About Applications/Software When you have updated the firmware for the camera, use the latest version of the application for your smartphone or the software for your PC. “LUMIX Sync” 0 Install or update the application on your smartphone. “PHOTOfunSTUDIO 10.1 PE” 0 Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs101pe_up.html (English only) https://panasonic.
Firmware Ver. 2.0 Additions/Changes to AF Functions Automatic Detection AF Has Been Added to [1-Area+]/ [1-Area] Automatic detection is now available in the [1-Area+]/[1-Area] AF modes. When a part of a human or animal enters the [1-Area+]/[1-Area] AF area, the automatic detection AF area is indicated in yellow. Eye detection works when a person’s face is inside the AF area. The item names have been changed from [Face/Eye/Body Detection] to [Human Detect AF], and from [Face/Eye/Body/Animal Detect.
Firmware Ver. 2.0 Support for the [AF+MF] Function During Recording of Video During video recording, the MF mode is engaged when you rotate the focus ring, and the AF mode is engaged when you stop rotating the focus ring. ¨[ ]¨[ ] ¨ [AF+MF] 0 When [Continuous AF] is set to [MODE2], the focus can be adjusted manually even during recording standby.
Firmware Ver. 2.0 Additions/Changes to Video Functions C4K Recording Qualities Have Been Added C4K recording qualities are now supported. ¨[ ]¨[ ] ¨ Select [Rec Quality] [Rec. File Format]: [MOV] 0 Audio format: LPCM (2ch) A Recording frame rate B Bit rate (Mbps) C Video compression format (AVC: H.264/MPEG-4 AVC) [Switch NTSC/PAL]: [NTSC] [Rec Quality] Resolution YUV/bit A B C [C4K/60p/420/8-L]¢ 4096k2160 4:2:0/8 bit 59.94p 150 AVC [C4K/30p/422/10-L]¢ 4096k2160 4:2:2/10 bit 29.
Firmware Ver. 2.0 0 In this document, videos are indicated as follows according to their resolution: – C4K (4096k2160) video: C4K video 0 All videos will be recorded using Long GOP to compress the images. 0 When recording to an SD card, use a card rated at UHS Speed Class 3 or higher.
Firmware Ver. 2.0 Video Recording Time for Cards Listed below are the time lengths of videos that can be recorded on a card. 0 Video recording time is the total time of all the videos which have been recorded. 0 The values listed are approximate. 0 [Rec. File Format]: [MOV] 0 “h” is an abbreviation for hour, “m” for minute and “s” for second.
Firmware Ver. 2.0 Support for Vector Scope Display It is now possible to display the vector scope in the recording screen. Accordingly, [Waveform Monitor] has been changed to [WFM/Vector Scope]. ¨[ ]¨[ [WAVE] [VECTOR] ] ¨ Select [WFM/Vector Scope] Displays a waveform. Displays the vector scope. [OFF] — Screen Displays (Vector Scope) A B C D E F G R (Red) YL (Yellow) G (Green) MG (Magenta) B (Blue) CY (Cyan) Display example 0 The vector scope is not output through HDMI.
Firmware Ver. 2.0 [Master Pedestal Level] Has Been Added You can adjust the black level, which serves as the reference for images. 1 2 Set the mode dial to [ ] or [S&Q]. Select [Master Pedestal Level]. ≥ 3 ¨[ ]¨[ ]¨ [Master Pedestal Level] Adjust master pedestal. ≥Rotate , or . +4 MPL -15 -10 -5 0 5 10 15 0 Set in the range between j15 and i15.
Firmware Ver. 2.0 [SS/Gain Operation] Has Been Added It is now possible to set the shutter speed by angle and the gain (sensitivity) by dB units. ¨[ ]¨[ ] ¨ Select [SS/Gain Operation] [SEC/ISO] Displays the shutter speed in seconds and the gain in ISO. [ANGLE/ISO] Displays the shutter speed in degrees and the gain in ISO. 0 The angle can be set in a range between 11° and 358°. [SEC/dB] Displays the shutter speed in seconds and the gain in dB. 0 0 dB is equivalent to [ISO100].
Firmware Ver. 2.0 Support for Output of RAW Video Data 12-bit RAW Video Data with a maximum resolution of 5.9K can now be output via HDMI to a compatible external recorder. 5.9K(16:9)/FULL 29.97p/25.00p/23.98p 4K(17:9)/APS-C 59.94p/50.00p/29.97p/25.00p/23.98p 3.5K(4:3)/APS-C 50.00p/29.97p/25.00p/23.98p HDMI A RAW Video B External recorder 0 Recording of the RAW Video Data of this camera has been confirmed on the following external recorder.
Firmware Ver. 2.0 Outputting RAW Video Data via HDMI [HDMI RAW Data Output] has been added to the [Video] menu. The image quality for the output images is set in either [Rec Quality] or [Anamorphic(4:3)]. Getting started: 1 Turn off the camera and the external recorder. 2 Connect the camera and the external recorder with a commercially available HDMI micro cable. 0 Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work.
Firmware Ver. 2.0 3 Select [Rec Quality]. ≥ 4 ¨[ ]¨[ ] ¨ [Rec Quality]/[Anamorphic(4:3)] Set the HDMI input on the external recorder. 0 When the connection is complete, images will be displayed on the screen of the external recorder. There are differences from normal HDMI output operation. 0 [HDMI Rec Output] in the [Custom] ([IN/OUT]) menu. – [Info Display] is not available. You cannot output the camera information display to an external recorder connected by HDMI.
Firmware Ver. 2.0 [Rec Quality] (When [HDMI RAW Data Output] Is Selected) [Image Area of Video] Resolution [5.9K/30p/16:9] [FULL] 5888k3312 29.97p [5.9K/24p/16:9] [FULL] 5888k3312 23.98p [Rec Quality] [4K/60p/17:9] [Switch NTSC/ PAL] [NTSC] Frame rate [APS-C] 4128k2176 59.94p [4K/30p/17:9] [APS-C] 4128k2176 29.97p [4K/24p/17:9] [APS-C] 4128k2176 23.98p [5.9K/25p/16:9] [FULL] 5888k3312 25.00p [APS-C] 4128k2176 50.00p [APS-C] 4128k2176 25.
Firmware Ver. 2.0 Monitor/Viewfinder Display When Outputting RAW Video Data Images equivalent to those recorded when recording with V-Log are displayed on the monitor/viewfinder of the camera for monitoring purposes. [LUT View Assist (Monitor)] with the [Vlog_709] preset applied can be used for the [V-Log View Assist]. 0 The LUT for the monitor display cannot be changed.
Firmware Ver. 2.0 [HDMI Time Code Output]/[HDMI Recording Control] The time code of the camera can be added and output via HDMI to the external recorder. In addition, recording can be started and stopped on the external recorder by using the video rec. button and shutter button of the camera. 1 Set [HDMI Time Code Output] to [ON]. 0 ¨[ ]¨[ ] ¨ [Time Code] ¨ [HDMI Time Code Output] ¨ [ON] 2 Set [HDMI Recording Control] to [ON].
Firmware Ver. 2.0 Additions/Changes to Other Functions [L.ClassicNeo] and [L.Monochrome S] Have Been Added to [Photo Style] [L.ClassicNeo] and [L.Monochrome S] have been added to [Photo Style]. ¨[ ]/[ ]¨[ ] ¨ Select [Photo Style] [L.ClassicNeo] A setting for a film-like effect that has a nostalgic, soft coloring. [L.Monochrome S] A setting for a black and white effect with a gentle touch suited to portraits. 0 When [Photo Style] is set to [L.Monochrome S], [ F-18 ] operates as [Ø].
Firmware Ver. 2.0 [Color Noise] Has Been Added to the [Photo Style] Image Quality Adjustments Grainy color noise can be added to pictures recorded with [L.ClassicNeo]. Settings Items (Image Quality Adjustment) [Color Noise] [On]/ [Off] Color can be added with a grainy texture. 0 The items that you can adjust the image quality for depend on the Photo Style type.
Firmware Ver. 2.0 [L.ClassicNeo] and [L.Monochrome S] Have Been Added to the [Photo Style] of [RAW Processing] [L.ClassicNeo] and [L.Monochrome S] have been added to the [Photo Style] of [RAW Processing]. Furthermore, when [L.ClassicNeo] has been set, the [Color Noise] setting item can be selected. 0 The items that can be adjusted depend on the selected [Photo Style].
Firmware Ver. 2.0 [Horizontal Image Flip(Monitor)] and [Vertical Image Flip(Monitor)] Have Been Added to [LVF/Monitor Disp. Set] It is now possible to set whether the screen flips or not depending on the facing or angle of the monitor during recording. ¨[ ]¨[ ] ¨ [LVF/Monitor Disp.
Firmware Ver. 2.0 Fn Buttons/Quick Menu Usage of the following functions is enabled. Fn buttons ¨[ ]¨[ [Setting in REC mode] ] ¨ [Fn Button Set] [1] tab [Image Quality] [2] tab [Monitor / Display] [Photo Style] – [L.ClassicNeo] – [L.Monochrome S] – [WFM/Vector Scope] Quick menu ¨[ ]¨[ ] ¨ [Q.
Firmware Ver. 2.0 Added Menus Specifications information for the menus added by the firmware update.
Firmware Ver. 2.0 List of Functions That Can Be Set in Each Recording Mode Menu [Video]: iA P A S M S&Q [Image Quality] [Master Pedestal Level] 3 3 [SS/Gain Operation] 3 3 [Video]: [Image Format] [HDMI RAW Data Output] 0 Ninja V / ATOMOS are registered trademarks of ATOMOS Limited.
