Operating Instructions

10. Recording Videos
243
0 If an operation such as a zoom or button operation is performed during video
recording, that operation sound may be recorded.
0 The lens operation sound (AF and image stabilizer) may be recorded to video.
0 If the operation sound of pressing the video rec. button to end recording
bothers you, try the following:
– Record the video about 3 seconds longer, and then divide the last part of the
video using [Video Divide] in the [Playback] ([Edit Image]) menu.
– Use the Shutter Remote Control (DMW-RS2: optional) for recording.
0 Depending on the type of card, the card access indication may appear for a
while after video recording. This is not a malfunction.
0 Even when playback is performed on a supported device, situations may
occur where image or sound quality is poor, recording information is not
displayed correctly, or playback is not possible, for example.
If you experience any of these, play them back on the camera.
0 If the temperature of the camera rises, [ ] may be displayed, recording may
stop, and some functions may become unavailable temporarily. Wait until the
camera cools down.
0 Video recording is not possible while you are using the following functions:
– [Time Lapse Shot]
– [Stop Motion Animation]
– [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/
[Sunshine] ([Filter Settings])
– [HLG Photo]
– [Post-Focus]
0 The available recording time can be displayed during recording standby:
[] ¨ [ ] ¨ [Photos/Videos Remaining] (l 389)
0 You can switch the live view angle of view to the angle of view for video
recording:
[] ¨ [ ] ¨ [Photo/Video Preview] (l 388)
0 You can display a red frame on the recording screen that indicates that video
is being recorded:
[] ¨ [ ] ¨ [Red REC Frame Indicator] (l 393)