Operating Instructions
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabilizer
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- [Live View Composite]
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabilizer
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- Recording Videos
- Recording Modes Specifically for Video (Creative Video/S&Q)
- Video Recording Settings
- Time Code
- Using AF (Video)
- Video Brightness and Coloring
- Audio Settings
- Main Assist Functions
- Slow & Quick Video
- [Live Cropping]
- Log Recording
- HLG Videos
- Anamorphic Recording
- List of Recording Qualities That Enable Special Videos to be Recorded
- 11. Connections with External Devices (Video)
- 12. Playing Back and Editing of Images
- 13. Camera Customization
- 14. Menu Guide
- 15. Wi-Fi/Bluetooth
- 16. Connecting to Other Devices
- 17. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licenses
- Firmware Update
10. Recording Videos
248
This section describes the settings used when video recording.
[Switch NTSC/PAL]
The image qualities you can select in [Rec Quality] are switched to the
image qualities with the frame rate to suit the NTSC/PAL TV broadcast
system.
The default setting is for the frame rate to be set to suit the TV broadcast
system for the region where the camera was purchased.
¨ [ ] ¨ [ ] ¨ Select [Switch NTSC/PAL]
Video Recording Settings
0
In “4. Image Recording”, the functions described work with both pictures and
video.
Please also refer to that section.
– [Double Card Slot Function]: l 88
– [Folder / File Settings]: l 89
– [File Number Reset]: l 91
[NTSC] The image qualities for NTSC can be selected in [Rec Quality].
[PAL] The image qualities for PAL can be selected in [Rec Quality].
0
If you record using the setting that differs from the broadcasting system of
your region, it may not be possible for you to properly play back videos on
your TV.
We recommend using the setting as it was at the time of purchase if you are
unsure about broadcasting systems.