Operating Instructions
Table Of Contents
- About Operating Instructions
- Chapters
- Contents
- Contents by Function
- 1. Introduction
- 2. Getting Started
- 3. Basic Operations
- 4. Image Recording
- 5. Focus/Zoom
- 6. Drive/Shutter/Image Stabilizer
- Selecting the Drive Mode
- Taking Burst Pictures
- 6K/4K Photo Recording
- Selecting Pictures from a 6K/4K Burst File
- Recording with Time Lapse Shot
- Recording with Stop Motion Animation
- Time Lapse Shot/Stop Motion Animation Videos
- Recording Using the Self-timer
- Bracket Recording
- [Live View Composite]
- Post-Focus Recording
- [Silent Mode]
- [Shutter Type]
- Image Stabilizer
- 7. Metering/Exposure/ISO Sensitivity
- 8. White Balance/Image Quality
- 9. Flash
- 10. Recording Videos
- Recording Videos
- Recording Modes Specifically for Video (Creative Video/S&Q)
- Video Recording Settings
- Time Code
- Using AF (Video)
- Video Brightness and Coloring
- Audio Settings
- Main Assist Functions
- Slow & Quick Video
- [Live Cropping]
- Log Recording
- HLG Videos
- Anamorphic Recording
- List of Recording Qualities That Enable Special Videos to be Recorded
- 11. Connections with External Devices (Video)
- 12. Playing Back and Editing of Images
- 13. Camera Customization
- 14. Menu Guide
- 15. Wi-Fi/Bluetooth
- 16. Connecting to Other Devices
- 17. Materials
- Using Optional Accessories
- Monitor/Viewfinder Displays
- Message Displays
- Troubleshooting
- Cautions for Use
- Number of Pictures That Can Be Taken and Available Recording Time with the Battery
- Number of Still Images That Can Be Taken and Video Recording Time with Cards
- List of Default Settings/Custom Saving/Settings Available for Copying
- List of Functions That Can Be Set in Each Recording Mode
- Specifications
- Index
- Trademarks and Licenses
- Firmware Update
17. Materials
503
Lens
0
Remove the lens once, and then attach it again without pressing the lens release
button. (l 49)
Turn on the camera again, and if it is still displaying, contact the dealer.
0
Remove the lens from the camera body and gently wipe the contacts on the lens and
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
Battery
0
Use a genuine Panasonic battery.
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
0
If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
[Lens attachment failed. Please make sure the lens is attached
correctly.]
[This battery cannot be used]