Operating Instructions

Drive / Shutter / Image Stabilizer – Recording with Time Lapse Shot
222
3
Set the recording settings.
[Mode]
Switches between Time Lapse Shot and Stop Motion Animation.
[Shooting Interval Setting]
[ON]: Sets the interval before the next recording takes place.
[OFF]: Takes pictures without leaving recording intervals.
[Start Time]
[Now]: Starts recording when the shutter button is pressed fully.
[After 2 Seconds]: Starts recording 2 seconds after the shutter button is
pressed fully.
[Start Time Set]: Starts recording at the set time.
[Image Count]/[Shooting Interval]
Sets the number of pictures and the recording interval to be taken.
The number of pictures and the recording interval to be taken can be
automatically calculated and set. (Setting Assistant for Time Lapse Shot
Recording: 224)
• [Shooting Interval] is not available when [Shooting Interval Setting] is set to
[OFF].
[Exposure Leveling]
Adjusts the exposure automatically to prevent large changes in brightness
between adjacent frames.
[Create New Folder At Rec]
[Create a New Folder]: When set to [ON], a new folder is created each time
that Time Lapse Shot recording is started.
[File Number Reset]: When set to [ON], the file number is reset each time a
new folder is created.