Operating Instructions

Video Settings – XLR Microphone Adaptor (Optional)
392
1
Attach the XLR Microphone Adaptor to the hot shoe,
and then turn on the camera.
≥  []  []  [XLR Mic Adaptor Setting]
•
When the XLR Microphone Adaptor is attached, [XLR Mic Adaptor Setting]
automatically turns [ON].
[ON]
Records audio using the XLR microphone.
[OFF]
Records audio using the built-in microphone of the camera.
2
Make settings for the sound quality of the audio to be
recorded in [Sound Rec Quality] (
[Sound Rec Quality]:
382).
• While an XLR Microphone Adaptor is attached, [ ] is displayed on the screen.
• When [XLR Mic Adaptor Setting] is set to [ON] and [4ch Mic Input] is [OFF], the
following settings are fixed:
– [Sound Rec Level Limiter]: [OFF]
– [Wind Noise Canceller]: [OFF]
– [Sound Output]: [REC SOUND]
• When [XLR Mic Adaptor Setting] is set to [ON] and [4ch Mic Input] is [OFF],
[Sound Rec Gain Level] and [Sound Rec Level Adj.] are not available.
• When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.]
automatically turns [ON], and the recording level is displayed on the screen.
• When the XLR Microphone Adaptor is attached, do not carry the camera by
holding the XLR Microphone Adaptor. It may become detached.
• If noises are recorded when using the AC adaptor, use the battery.
• For details, refer to the operating instructions for the XLR Microphone Adaptor.