Operating Instructions
Wi-Fi / Bluetooth – [LAN / Wi-Fi Setup] Menu
697
[IP Address Setting (LAN)]
Sets the IP address when connecting via wired LAN.
You can select to either automatically allocate the IP address with the DHCP, or set
any static IP address.
[DHCP Server]: Select when the camera is to be connected as the DHCP server.
[DHCP Client]: Select when the camera is to be connected as the DHCP client.
(Default setting)
[Static IP Address]: Select when connecting using an IP set in [Static IP Address
Setting].
[Static IP Address Setting]: Set the IP address to be used in [Static IP Address].
[IP Address]: The default setting is <192.168.0.2>.
[Subnet Mask]: The default setting is <255.255.255.0>.
[Default Gateway]: The default setting is <192.168.0.1>.
Use the correct combinations when setting the [IP Address], [Subnet Mask], and
[Default Gateway].
• Consult the administrator of the network you are using for detailed information about
the DHCP settings and static IP address settings.
• If you have modified settings in [IP Address Setting (LAN)], turn the camera off and
on again.
[Wi-Fi Password]
When connecting to a smartphone, you can use a password for enhanced security.
(Using Password Authentication to Connect: 657)
• You can change the password by using [Device Name/Password]. ([Device Name/
Password]: 698)
[PC Connection]
You can set the workgroup.
To send images to a PC, you need to connect to the same workgroup as the
destination PC.
(The default setting is “WORKGROUP”.)
• To change the workgroup name, press or and enter the new workgroup
name.
• To return to the default settings, press [DISP.].