Operating Instructions

Wi-Fi / Bluetooth – [LAN / Wi-Fi Setup] Menu
698
[Device Name/Password]
You can change the camera name (SSID) and password.
• Press [DISP.] to change the device name and password.
• The number of characters you can enter is a maximum of 32 for the device name
and between 8 and 63 for the password.
[LAN / Wi-Fi Function Lock]
You can set a password to prevent incorrect operation and use of the wired LAN/Wi-Fi
functions by a third party and to protect personal information that may be found either
in the camera itself or in images recorded with the camera.
[Setup]: Enter any 4-digit numbers as the password.
• Once a password is set, you are required to enter it when you select [LAN / Wi-Fi
Setup] or [Streaming].
[Cancel]: Cancel the password.
[Network Address Display (LAN)]
Displays the MAC address and IP address of the camera when connecting via wired
LAN.
[Network Address Display (Wi-Fi)]
Displays the MAC address and IP address of the camera when connecting via Wi-Fi.
• If you forget your password, you can use [Reset] in the [Setup] ([Setting]) menu
to reset the network settings and thereby reset the password.
• How to enter characters (Entering Characters: 101)