Operating Instructions

Streaming Function – Stream by Operating the Camera

706

Set the streaming destination on the PC.

1 Start up “LUMIX Network Setting Software”.

2 Login to a video sharing website and retrieve a streaming destination

(URL, stream key).

3 Input the streaming destination (URL, stream key) to “LUMIX Network

Setting Software” and select [Next].

4 Set the output destination (card) and file name, and select [Save].

• Characters that can be set in [File Name]: Alphabet (uppercase),

numbers, up to 8 characters.

• To prevent usage from a third party, you can secure the streaming

destination with a password.

– Put a check mark in [Password].

– When you set a password, password input will be required when

loading the streaming destination.

– You can enter any 4-digit numbers as the password.

• The settings set at step 3 is saved in the card.

Set the camera’s recording mode to [ ].

≥Set the mode dial. (Selecting the Recording Mode: 76)

Insert into the camera the card onto which you have

saved the streaming destination in Step