Operating Instructions

Streaming Function – Notes When Using the Streaming Function
722
Notes When Using USB Tethering/Wired LAN
• When the streaming function is not to be used, set [Streaming Function] to
[OFF].
When set to [ON], if the [Connection Method] is set to [USB Tethering] or [LAN],
power is supplied from the battery of this camera to the connected device, so the
battery will be consumed faster.
• For information about the high temperature display (For information about
the high temperature display: 129)
• The network connection light does not light when connected to the internet via USB
tethering.
• After connecting via USB tethering or wired LAN, when charging the battery in the
camera, make sure that the charging light of the camera lights red.
If the charging light does not light, reconnect the USB connection cable while the
camera is turned off.