Operating Instructions

Connecting to Other Devices – Tethered Recording
739
Using “LUMIX Tether” with a Wired LAN Connection
Getting started:
• Turn on the camera and PC.
• Install “LUMIX Tether” on PC.
1
Set the camera as a DHCP server.
≥  []  []  [LAN / Wi-Fi]  [LAN / Wi-Fi Setup]  [IP
Address Setting (LAN)]  [DHCP Server]
•
If you have modified settings in [IP Address Setting (LAN)], turn the camera
off and on again.
2
Set to wired LAN tethering connection.
≥  []  []  [USB]  [Tether(USB ethernet adaptor)] 
[ON]
3
Connect the commercially available USB ethernet
adaptor to the camera, then use a commercially
available LAN cable to connect the camera and the PC.
(A) USB ethernet adaptor (commercially available)
(B) LAN cable (commercially available)
(C) A PC on which “LUMIX Tether” is installed
(A) (B) (C)