Operating Instructions

Connecting to Other Devices – Tethered Recording

741

Remote Control of Multiple Cameras

A number of cameras can be remotely controlled using “LUMIX Tether”.

Getting started:

• Turn on the camera and PC.

• Install “LUMIX Tether” on PC.

Set the camera as a DHCP client (default setting).

≥  []  []  [LAN / Wi-Fi]  [LAN / Wi-Fi Setup]  [IP

Address Setting (LAN)]  [DHCP Client]

•

If there is no DHCP server in the LAN, it is also possible to make the

connection by setting one camera as [DHCP Server], and the remainder as

[DHCP Client].

• If you have modified settings in [IP Address Setting (LAN)], turn the camera

off and on again.