Operating Instructions
Materials – Troubleshooting
782
Striping or flicker may appear under lighting such as fluorescent
or LED lighting.
•
This is characteristic of CMOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• When using the electronic shutter ([Shutter Type]: 252), lowering the shutter
speed may reduce the effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] ([Flicker Decrease (Video)]: 403), or fix the
shutter speed with the [ ]/[S&Q] mode (Recording Modes Specifically for
Video (Creative Video/S&Q): 359).
Stripes appear in high ISO sensitivity.
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
Decrease the ISO sensitivity. (ISO Sensitivity: 295)