Operating Instructions DVD Recorder Region numbers are allocated to DVD players and DVD-Video according to where they are sold. For Australia and N.Z. 6 For Asia For Australia and N.Z. • The region number of this unit is “3”. • The unit will play DVD-Video marked with labels containing “3” or “ALL”. Example: 3 ALL 2 3 6 For Middle East and South Africa • The region number of this unit is “2”. • The unit will play DVD-Video marked with labels containing “2” or “ALL”.
Caution for AC Mains Lead CAUTION! (For Middle East and South Africa) THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Table of contents Editing Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . .2 Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 The remote control information. . . . . . . . . . . . . . . . . . . . .6 Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc information Discs you can use for recording and play DVD-RAM Disc type Indication in these instructions by RAM DVD-R DVD-R DL 1 (dual layer on single side) DVD-RW +R 2 +R DL 1 (double layer on single side) +RW -R -R DL -RW(V) +R +R DL Before finalization Before finalization Before finalization Before finalization Before finalization DVD-V DVD-V DVD-V DVD-V DVD-V After finalization After finalization After finalization After finalization After finalization –––– –––– ––––
Play-only discs Disc type Indication in these instructions DVD-Video DVD-Audio DVD-RW (VR format) DVD-V DVD-A -RW(VR) High fidelity music discs • Played on this unit in 2 channels. DVD-RW recorded on another DVD Recorder 1 • You can play programmes that allow “One time only recording” if they have been recorded to a CPRM compatible disc. • By formatting (Ô page 36) the disc, you can record to it in DVD-Video format. • It may be necessary to finalize the disc on the equipment used for recording.
The remote control information n Batteries • Insert so the poles (+ and –) match those in the remote control. • Do not use rechargeable type batteries. • Do not mix old and new batteries. • Do not use different types at R6/LR6, AA the same time. • Do not heat or expose to flame. • Do not take apart or short circuit. • Do not attempt to recharge alkaline or manganese batteries. • Do not use batteries if the covering has been peeled off.
Control reference guide Remote control e.g., Australia and N.Z. 1 bp bq 2 br bs 3 4 5 6 bt ck cl 7 8 9 bk bl bm bn cm cn co cp cq cr 1 Turn the unit on (Ô page 11) 2 Select channels and title numbers etc.
STEP 1 Connection Make sure to use the pair of supplied RF coaxial cables Use the pair of supplied RF coaxial cables only when you make connections to the unit through the RF IN and RF OUT terminals. Striping may appear and disrupt images on the TV if you use different cables for connection. • Before connection, turn off all equipment and read the appropriate operating instructions. • Select the connection pattern that matches your environment from patterns A-B.
Connecting a television and VCR To household mains socket For Australia and N.Z. (AC 220 to 240 V, 50 Hz) (AC 220 to 240 V, 50/60 Hz) To the aerial Television’s rear panel AUDIO IN VIDEO R L IN VHF/UHF RF IN Red White Yellow AC mains lead (included) Connect only after all other connections are complete. For Middle East and South Africa • Use the AC mains lead that matches the socket for the area you live in.
STEP 1 Connection Other connections Connecting a television with S VIDEO terminals The S VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal. (Actual results depend on the television.
STEP 2 Channel reception and TV aspect settings Select an item with [w,q] and press [e,r] to change the settings. This is a 24-hour clock. The items change as follows: Hour Minute Second 8 e.g., Australia and N.Z. 4 ^ DVD Day Month Year You can also use the numbered buttons for setting. Reset the clock regularly to maintain accuracy (Ô page 44). (Monthly accuracy +/– 15 seconds.) Press [ENTER] when you have finished the settings. TV aspect setting screen appears.
Set up to match your television and remote control To enjoy progressive video You can enjoy progressive video by connecting this unit’s COMPONENT VIDEO OUT terminals to an LCD/plasma television or LCD projector compatible with progressive scan (Ô page 50). ; OPEN/CLOSE * REC e.g., Australia and N.Z. 1 2 While stopped Press [FUNCTIONS]. Press [e,r] to select “To Others” and press [ENTER]. e.g., Australia and N.Z.
Television operation When other Panasonic products respond to this remote control You can operate the TV through the unit’s remote control. Volume Turn TV on/off Input Select Channel Select Point the remote control at the television While pressing [^ TV], enter the code with the numbered buttons. e.g., 01: [0] Ô [1] Manufacturer and Code No.
Important notes for recording RAM -R Both main and secondary audio can be recorded You can change the audio during playback. (Ô page 22, “Changing audio during play”) Recording of bilingual programme M1 Hello M2 Hallo M1 Hello If you record from external equipment – Select both “M 1” and “M 2” on the external equipment.
Recording modes and approximate recording times DVD-RAM DVD-R, DVD-RW, 9.4 GB +R, +RW (Double4.7 GB 4.7 GB sided 1) 1 h. 2 h. 1 h. 2 h. 4 h. 2 h. 4 h. 8 h. 4 h. 8 h. 16 h. 8 h. (6 h. 2) (12 h. 2) (6 h. 2) 8 h. maximum 8 h. maximum 8 h. maximum for one side Recording Mode XP (High quality) SP (Standard) LP (Long play) EP (Extra long play) FR (Flexible Recording) DVD-R DL, +R DL 3 8.5 GB First layer (L0) Second layer (L1) 55 min. 50 min. 1 h. 50 min. 1 h. 40 min. 3 h. 40 min. 3 h. 20 min. 7 h. 25 min. 6 h.
Recording television programmes ; OPEN/CLOSE EXT LINK DV IN 2 CH To select with the numbered buttons: e.g., 5: [5] 15: [-/--] Ô [1] Ô [5] AV3 2 CH 1 g q * REC 8 Press [1 2 CH] to select the channel. 3 e.g., Australia and N.Z. Press [REC MODE] to select the recording mode (XP, SP, LP or EP). ^ DVD Numbered buttons 1 2 CH 4 Remaining time on the disc Press [* REC] to start recording. -/-- g The elapsed time is shown on the display. Recording will take place on open space on disc.
Playing while you are recording RAM During recording Press [* REC] on the main unit to select the recording time. • The unit’s display changes as shown below. OFF 0:30 OFF 1:00 Counter (cancel) OFF 1:30 OFF 4:00 OFF 2:00 OFF 3:00 • This does not work during timer recordings (Ô page 18) or while using Flexible Recording (Ô below). • If you change the channel or recording mode while recording is paused, the time specified to stop recording is cancelled.
Timer recording For Australia and N.Z. e.g., Australia and N.Z. Using G-CODE system to make timer recordings Entering G-CODE numbers is an easy way of timer recording. You can find these numbers in TV listings in newspapers and magazines. • You can enter up to 16 programmes up to a month in advance. 1 Press [G-Code]. G-Code Record Numbered buttons G-Code Remain 1:57 SP 8:12:34 7. 5. SUN Input G-Code Number 0-9, and press ENTER.
Manually programming timer recordings You can enter up to 16 programmes up to a month in advance. (Each daily or weekly programme is counted as one programme.) Press [PROG/CHECK]. Timer Recording Remain 1:57 SP 8:17:23 7. 5. SUN Drive space No. Name Date Start Stop Mode New Timer Programme Press ENTER to store new programme. ENTER RETURN 2 3 S SUB MENU CANCEL A Timer Off Press [e,r] to select “New Timer Programme” and press [ENTER].
Timer recording To cancel recording when recording has already begun e.g., Australia and N.Z. 1 2 When this unit is on Press [g]. The confirmation screen appears. Press [w,q] to select “Stop Recording” and press [ENTER]. Recording stops and the timer recording is cancelled. (Daily and weekly timers remain and timer recording will start as programmed.) To release the programme from recording standby g PROG/CHECK e,r,w,q ENTER 1 2 Press [PROG/CHECK]. Press [e,r] to select the programme and press [A].
Check, change or delete a programme Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK]. Icons Timer recording standby is activated. This programme is currently recording. W The times overlap those in another programme. Recording of the programme with the later start time starts when the earlier programme finishes recording. You stopped a weekly or daily timer recording. The icon disappears the next time the timer programme starts recording.
Playing discs Selecting recorded programmes (titles) to play –Direct Navigator e.g., Australia and N.Z. RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR) Simply select the recorded programmes (titles) you want to play from the menu. 1 Press [DIRECT NAVIGATOR]. DIRECT NAVIGATOR Title View DVD-RAM 07 Numbered buttons 08 ARD 1. 1. SUN -- u,i g h TIME SLIP DIRECT NAVIGATOR/ Top Menu SUB MENU AUDIO q MANUAL SKIP e,r,w,q ENTER w h, h q RETURN CREATE CHAPTER ARD 1. 1.
Operations during play Press [g]. Stop Playing discs The stopped position is memorized. Resume play function Press [q] (PLAY) to restart from this position. The stopped position is cleared when: – you press [g] several times. – you open the tray. – DVD-A CD VCD and MP3/DivX you turn the unit off. Press [h]. Pause Press again or press [q] (PLAY) to restart play. Press [t] or [y]. • The speed increases up to 5 steps ( +R +R DL +RW up to 3 steps). • Press [q] (PLAY) to restart play.
Using menus to play MP3, DivX and still pictures (JPEG/TIFF) Playing MP3, DivX and still pictures (JPEG/TIFF) e.g., Australia and N.Z. You can play CD-R/CD-RW discs which contain MP3 files, DivX video contents or still pictures that have been recorded on a computer. You can also play DVD-R discs which contain DivX video contents that have been recorded on a computer. ^ DVD 1 Press [DIRECT NAVIGATOR]. n MP3 G: Group no. T: Track no. in the group TOTAL: Track No.
To select other folder (group) MP3, DivX You can display still pictures one by one with constant interval. While the Menu screen is displayed Press [q]. While the JPEG Menu is displayed 1 Press [e,r,w,q] to select “Folder” and press [SUB MENU]. n MP3 G: Selected group No. /Total group No. If the group has no track, “– –” is displayed as group number. G 1 T 1 TOTAL 1/ 91 Number 0 -- 9 Prev. Next SELECT ENTER JPEG Menu CD(JPEG) Folder No.
Using menus to play MP3, DivX and still pictures (JPEG/TIFF) Refer to the control reference on page 24. Regarding DivX VOD content DivX Video-on-Demand (VOD) content is encrypted for copyright protection. In order to play DivX VOD content on this unit, you first need to register the unit. Follow the on line instructions for purchasing DivX VOD content to enter the unit’s registration code and register the unit. For more information about DivX VOD, visit www.divx.com/vod.
Using on-screen menus/FUNCTIONS window and Status message Disc menu–Setting the disc content e.g., Australia and N.Z. Soundtrack DVD-V DVD-A Select the audio and language (Ô below, Audio attribute, Language). -R -R DL -RW(V) +R +R DL +RW -RW(VR) Subtitle DVD-V DVD-A Turn the subtitle on/off and select the language (Ô below, Language). RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR) (Only discs that contain subtitle on/off information) • Subtitle on/off information cannot be recorded using this unit.
Using on-screen menus/FUNCTIONS window and Status message Refer to the control reference on page 27. Picture menu–Change the picture quality Playback NR Reduces noise and picture degradation. On ↔ Off FUNCTIONS window By using the FUNCTIONS window you may access the main functions quickly and easily. 1 Progressive (Ô page 50) While stopped Press [FUNCTIONS]. Functions displayed depend on the type of disc. Select “On” to enable progressive output. Select “Off” if the picture is stretched horizontally.
Deleting titles Using DELETE Navigator to delete titles e.g., Australia and N.Z. 1 2 u,i While stopped Press [FUNCTIONS]. Press [e,r] to select “Delete” and press [ENTER]. DELETE Navigator Title View DVD-RAM 07 ARD h 08 -- Previous e,r,w,q ENTER 3 RETURN 7. 5. SUN -- -- Page ENTER S SUB MENU RETURN FUNCTIONS -- ARD 7. 5. SUN Next 02/02 Select No. Previous 0Next -- 9 Press [e,r,w,q] to select the title and press [ENTER]. To show other pages Press [u] (Previous) or [i] (Next).
Editing titles/chapters Editing titles/chapters and playing chapters e.g., Australia and N.Z. 1 2 During play or while stopped Press [DIRECT NAVIGATOR]. Press [e,r,w,q] to select the title. DIRECT NAVIGATOR Title View DVD-RAM 07 08 ARD -- ARD 7. 5. SUN -- 7. 5. SUN -- -- u,i Previous h SUB MENU Next 02/02 Select No. Previous 0Next -- 9 To show other pages Press [u] (Previous) or [i] (Next). Multiple editing Select with [e,r,w,q] and press [h]. (Repeat.) • A check mark appears.
Title operations After performing steps 1–3 (Ô page 30) RAM -R -R DL -RW(V) +R +R DL +RW Properties RAM -R • Once deleted, the recorded contents are lost and cannot be restored. Make certain before proceeding. • -R -R DL +R +R DL The available recording time on a disc does not increase when you delete titles. • -RW(V) +RW Available recording space on a disc increases only when the last recorded title is deleted. It does not increase if other titles are deleted. Information (e.g.
Creating, editing and playing playlists 3 e.g., Australia and N.Z. 4 Press [e,r] to select “Playlists” and press [ENTER]. Press [e,r,w,q] to select “Create” and press [ENTER]. Playlists DVD-RAM Playlist View -- -- -- -- -- Create -- e,r,w,q ENTER Previous FUNCTIONS 5 RETURN SUB MENU Page ENTER S SUB MENU RETURN 01/01 Next No. Select 0 -- 9 Press [w,q] to select the source title and press [r]. • Press [ENTER] to select all the chapters in the title, then skip to step 7.
Editing and playing playlists/chapters After performing steps 1–5 (Ô left) -RW(VR) (play only) 2 3 4 Delete While stopped RAM Press [FUNCTIONS]. Press [e,r] to select “To Others” and press [ENTER]. Press [e,r] to select “Playlists” and press [ENTER]. Press [e,r,w,q] to select the playlist. Properties To start play Ô Press [ENTER]. To edit Ô Step 5. Create Playlists DVD-RAM Playlist View 01 -- 7. 5. SUN 0:30 Create -- -- Previous 01/01 No. No. Chapters 01 012 RAM RAM Date 7. 5.
Copying from a video cassette recorder DV automatic recording (DV Auto Rec) e.g., Australia and N.Z. RAM -R -RW(V) +R +RW Programmes are recorded as a title while at the same time chapters are created at each break in the images and the playlist is created automatically. When “DV Auto Rec” screen is displayed RAM Numbered buttons DV Auto Rec INPUT SELECT DV unit is connected. Record From the DV unit ? u,i Rec to DVD Cancel Press [w,q] to select “Rec to DVD” and press [ENTER].
Entering text Refer to the control reference on page 34. -R n To add a name -R DL -RW(V) +R +R DL +RW You can give names to recorded titles, etc. The maximum number of characters: -R Characters RAM -R DL Characters -RW(V) +R +R DL +RW Title 64 (44 ) Title 44 Playlist 64 Disc 40 Disc 64 Title name for timer recording If a name is long, parts of it may not be shown in some screens. 1 Show Enter Name screen.
DVD Management Deleting all titles and playlists –Delete all titles FUNCTIONS RAM e,r,w,q ENTER RETURN After performing steps 1–3 (Ô left) 4 Press [e,r] to select “Delete all titles” and press [ENTER]. Press [w,q] to select “Yes” and press [ENTER]. Press [w,q] to select “Start” and press [ENTER]. 5 Common procedures 6 Preparation • RAM 1 Release protection (Ô below). While stopped Press [FUNCTIONS]. Press [e,r] to select “To Others” and press [ENTER].
-R -R DL -RW(V) +R +R DL +RW You can select whether to show the top menu after finalizing. Make selections before finalizing the disc. After performing steps 1–3 (Ô page 36) 4 5 +RW +RW discs contain no Top Menu data. Top Menu is a convenient function. We recommend you to create the menu before playing a +RW disc on other equipment. You cannot use Top Menu for playing on this unit. After performing steps 1–3 (Ô page 36) Press [e,r] to select “Auto-Play Select” and press [ENTER].
Child Lock The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit. Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” appears on the unit’s display. ENTER RETURN If you press a button while the Child Lock is on, “X HOLD” appears on the unit’s display and operation is impossible. To cancel the Child Lock Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
Summary of settings The settings remain intact even if you switch the unit to standby. Tabs Tuning Menus Options (Underlined items are the factory presets.) Manual (Ô page 42) Settings for Playback • Press [ENTER] to show the following settings. Ratings Set a ratings level to limit DVD-Video play. Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password screen is shown. • Do not forget your password. • 8 No Limit: All DVD-Video can be played.
Changing the unit’s settings Refer to the control reference on page 38. Tabs Sound Menus Options (Underlined items are the factory presets.) Dynamic Range Compression DVD-V (Dolby Digital only) • On Change the dynamic range for late night viewing. • Off Bilingual Audio Selection •M2 -R -R DL -RW(V) +R •M1 +R DL +RW Select whether to record the main or secondary audio type when recording to a disc.
Menus Remote Control (Ô page 13) Clock (Ô page 44) Power Save • Refer to the following when “Power Save” is set to “On”. – “FL Display” is automatically set to “Automatic” (Ô page 40). – The “Quick Start” function does not work. (It is automatically turned to “Off”.) Quick Start The Quick Start feature enables this unit to be ready to start recording as quick as approx. 1 second after turning it on. You can start recording soon after deciding you want to record something. Only when recording to DVD-RAM.
Resetting channel setting Refer to the control reference on page 38. You can add or delete channels, or change programme positions. 1 2 3 4 While stopped Press [FUNCTIONS]. Press [e,r] to select “To Others” and press [ENTER]. Press [e,r] to select “Setup” and press [ENTER]. Press [e,r] to select “Tuning” and press [q]. Setup To change detailed station settings After performing steps 1–5 (Ô left) 6 Press [e,r,w,q] to select a programme position and press [ENTER]. e.g., Australia and N.Z.
TV System Refer to the control reference on page 38. You can restart auto channel setting if the channel reception setting (Ô page 11) fails for some reason. After performing steps 1–4 (Ô page 42) 5 6 Press [e,r] to select “Auto-Setup Restart” and press [ENTER]. The confirmation screen appears. Change this setting if you connect an NTSC television or to record NTSC video from another source. 1 2 Press [w,q] to select “Yes” and press [ENTER]. 3 For Australia and N.Z.
Set the clock manually Refer to the control reference on page 38. • In the case of a power failure, the clock setting remains in memory for approximately 60 minutes. 1 2 3 4 5 6 The items change as follows: Hour Minute Second While stopped Press [FUNCTIONS]. Press [e,r] to select “To Others” and press [ENTER]. Press [e,r] to select “Setup” and press [ENTER]. Press [e,r] to select “Others” and press [q]. Press [e,r] to select “Clock” and press [ENTER].
Messages On the television Authorization Error. • You are trying to play the DivX VOD content that was purchased with a different registration code. You cannot play the content on this unit. 26 Cannot finish recording completely. • The programme was copy-protected. • The disc may be full. • The maximum number of times you can record the programme is exceeded. — — — Cannot record on the disc. • The disc may be dirty or scratched. 6 Unable to format. Please check the disc. Cannot record.
Frequently asked questions Set up What equipment is necessary to play multi channel surround sound? Are the headphones and speakers directly connected to the unit? Page • DVD-Video: You can play DVD-Video multi channel surround by digitally connecting an amplifier equipped with a Dolby Digital, DTS or MPEG decoder. • DVD-Audio: This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound. 10 • You cannot directly connect to the unit. Connect through the amplifier etc.
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. The following do not indicate a problem with this unit: Power No power. The unit does not turn on pressing [^ DVD]. The unit switches to the standby mode. TV screen and video Television reception worsens after connecting the unit. Status messages do not appear.
Troubleshooting guide Operation Cannot operate the television. The remote control doesn’t work. Page • Change manufacturer code. Some televisions cannot be operated even if you change the code. • The remote control and main unit are using different codes. Change the code on the remote control. Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds. • The batteries are depleted. Replace them with new ones.
Play fails to start even when [q] (PLAY) is pressed. Play starts but then stops immediately. Audio and video momentarily pause. Page • • • • • Insert the disc correctly with the label facing up. The disc is dirty. You tried to play a blank disc or disc unplayable on this unit. You tried to play a +RW that needs to be finalized on the equipment used for recording. When recording to DVD-RAM using EP ( 8Hours ) mode, play may not be possible on DVD players that are compatible with DVD-RAM.
Glossary Bitstream This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. Component video output Component signal outputs the colour difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colours. If the television is compatible with progressive output, a high quality picture can be output because this unit’s component video output terminal outputs a progressive output signal.
Specifications Quick Start for Recording (Quick Start: On) 1 Sec. Quick Start for Recording on DVD-RAM From the power off state, recording on DVD-RAM starts about 1 second after first pressing the Power button and then sequentially pressing the REC button (Quick Start Mode).
Index Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Audio attribute . . . . . . . . . . . . . . . . . . . . . . .27 language . . . . . . . . . . . . . . . . . . . . . .27 playback . . . . . . . . . . . . . . . . . . . . . . .22 AV-in NR . . . . . . . . . . . . . . . . . . . . . . . . . .28 Change Thumbnail . . . . . . . . . . . . . . . . .31 Channel audio . . . . . . . . . . . . . . . . . . . . . . . . .27 settings. . . . . . . . . . . . . . . . . . . . .11, 42 Chapter . . . . . . . . . .
