Operating Instructions DVD Recorder DMR-ES35V

AUDIO
L
R
OUT
DIGITALAUDIO OUT
(PCM/BITSTREAM)
AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R
AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R
S VIDEO-cable
Audio cable
L - White
R - Red
Audio/Video cable
Video - Yellow
L - White
R - Red
LR
AUDIO IN
OPTICAL
Amplifier (example)
Optical digital audio cable
Amplifier (example)
Push the jack all the way into the
socket with this side facing up.
Audio cable
L - White
R - Red
49
Connect this unit to a device with
a DTS decoder in order to be able
to play DVDs with this symbol.
This device can playback stereo
sound in Dolby Digital (2 channels).
Connect an amplifier with built-in Dolby Digital
decoder in order to be able to enjoy Surround
Sound.
External units
Connection to AV3 (e.g. camcorder)
If the audio output of the other unit is mono, connect it to the L/MONO socket.
Both the left and the right channel will be recorded.
Connection to DV IN
Before you connect the DV cable, make sure that all units are switched off.
After you have connected the cable, switch on the units.
Connect the DV output of the DV unit (e.g. digital camcorder) with the
DV input socket of the DVD Recorder. Use a DV cable.
After you have connected the cable, switch on both units.
!
!
You can connect a DV-compatible camcorder to the DVD Recorder. The DV IN
connection is available for this purpose.
Digital satellite tuners and digital VHS video recorders are not compatible with this unit.
The DVD Recorder cannot be controlled via an external unit that is connected to the
DV IN socket.
DV means digital video and is a video standard.
13
For all connections described:
Before you connect cables, make sure that all units are switched off.
Switch on the units after you have connected the cables.
Connecting an analogue amplifier or an analogue system component
In order to enjoy stereo or Dolby Pro Logic, connect a corresponding amplifier
or an analogue audio component.
!
!
Connect the AUDIO OUT (L/R) output e.g. with a Dolby Pro Logic amplifier.
Connect the audio cable according to the colours and markings on the
connection sockets (white/L, red/R).
Connecting a digital amplifier or a digital system component
If an amplifier equipped with Dolby Digital, DTS or an MPEG-decoder is connected,
a DVD-Video-Disc with multi-channel surround sound can be played back.
!
Select one of the two connection options.
The connection with S VIDEO cable and audio cable (L/R) delivers the best quality.
It is not possible to copy to a VHS cassette
via DV IN..
!
!
!
!
Connect an amplifier with a Dolby Digital, DTS or an MPEG decoder.
Use an Optical digital audio cable.
Change the [Digital Audio Output] setting in the Setup menu Audio according
to your connected digital amplifier.
Select audio channel (M1) or (M2) on the external unit.
You cannot use
DTS Digital Surround decoders that are not suitable for DVD.
The DV input of this unit is only intended for DV units. For example, a computer
cannot be connected. Some DV units do not allow for proper input of the picture
and sound signal.
AUDIO
L
R
OPTICAL
DIGITALAUDIO OUT
(PCM/BITSTREAM)
OUT