user manual

Troubleshooting

139

Problem Solving

The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should

be replaced or refilled with ink.

NOTE

1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp. See page 51

of the Operating Instructions (For Copier) for order number.

Verification Stamp

To remove the stamp

Open the ADF unit.

Peel down the Scanning Pad slighty from the left side to

expose the Stamp Assembly as illustrated.

1. Remove by pulling the Stamp Assembly upward.

2. Remove the Stamp. Replace the stamp with a new one or

refill the stamp with a few drops of the specified ink into the

back of the stamp.

Reinstall the Stamp Assembly.