S P E C P ro d u c t N u m b e r : PT-D10000 P ro d u c t N a m e : 3-Chip DLP™ Projector F I L E As of November 2008. Appearance and specifications are subject to change without notice.
S P E C F I L E PT-D10000 3-Chip DLP™ Projector Specifications Main Unit Power supply: North America: 120 V AC, 15 A, 60 Hz Europe, Asia 220–240 V AC, 15 A, 50/60 Hz Power consumption: DLP™ chip: 1,450 W (25 W in standby mode with fan stopped) Panel size: 0.
S P E C F I L E PT-D10000 3-Chip DLP™ Projector VIDEO OUT: BNC x 1, 1.0 Vp-p, active through S-VIDEO IN: Mini DIN 4-pin x 1 Y: 1.0 Vp-p, C: 0.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector Remote Control Unit Number of functions: 35 keys, 39 functions Power supply: 3 V DC (AA battery x 2) Operation range* : Approx. 30 m when operated from directly signal receptor Dimensions (W x H x D): 51 x 22.7 x 176 mm (2˝ x 7/8˝ x 6-15/16˝) Weight: 134 g (4.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector Shape of the plug receptacle 120V AC, 20 A 220-240V AC, 16 A 220-240V AC, 13 A/15 A G W Note: Be sure to use the power plug adaptor cord supplied with the projector. The supplied power plug adaptor can be used with the PT-D10000 only. 607 (23-29/32˝) 643 (25-5/16˝) Dimensions 120 (4-23/32˝) 265 (10-7/16˝) 320 (12-19/32˝) 218 (8-19/32˝) 36 (1-13/32˝) unit : mm (inch) NOTE: This illustration is not drawn to scale.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector Standard setting-up positions 416.5– 536.5 (16-13/32˝– 21-1/8˝) *1 When the lens protrudes to the maximum. 163 L *1 Projected image 414 mm (16-5/16˝) with the ET-D75LE6 316.5 mm (12-15/32˝) with ET-D75LE1 301 mm (11-27/32˝) with the ET-D75LE2 304.5 mm (12˝) with the ET-D75LE3 328.4 mm (12-15/16˝) with the ET-D75LE4 456.5 mm (17-31/32˝) with the ET-D75LE8 404.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. ET-D75LE6 4 : 3 minimum maximum L (mm) = (diagonal screen size in inches) x 20.7 - 56.6 L (mm) = (diagonal screen size in inches) x 24.8 - 73.6 ET-D75LE1 4 : 3 minimum maximum L (mm) = (diagonal screen size in inches) x 30.68 - 76 L (mm) = (diagonal screen size in inches) x 40.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector List of compatible signals This projector supports RGB signals with horizontal frequencies of 15 to 100 kHz, vertical frequencies of 24 to 120 Hz and dot clock frequencies of 20 MHz to 162 MHz. NOTE: The native resolution of this projector is 1,920 x 1,080 pixels.
S P E F C I L E PT-D10000 3-Chip DLP™ Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names No. Signal name Description 1 – NC No.
S P E C F I L E PT-D10000 3-Chip DLP™ Projector Cable specifications Projector 1 PC (DTE) NC NC 3 3 4 NC NC 4 5 5 6 1 2 2 NC NC 6 7 7 8 8 9 NC NC 9 Control commands Command : Parameter Function PON POF IIS:RG1 IIS:RG2 IIS:VID IIS:SVD IIS:DVI IIS:AUX LPM:0 LPM:1 LPM:2 LPM:3 LPM:4 LPM:5 LPM:6 LPM:7 LPM:8 LPM:9 LPM:10 LPM:11 LPM:12 LPM:13 OSH:1 OSH:0 OPP:0 OPP:1 OPP:2 OPP:3 OAS VPM:NAT VPM:STD VPM:DYN VPM:CIN VPM:GRA OTE:0 OTE:1 OTE:2 OTE:4 OTE:9 OTE:10 TSD:y1y2y3y4m1m2d1d2w
S P E C F I L E PT-D10000 3-Chip DLP™ Projector Status asking commands Command : Parameter QPW Function Main power status QSH Shutter function status QIN Input signal status QOS On-screen display status QST Q$L:1 Q$L:2 Q$L:3 Q$L:4 QSL Projector run time Lamp 1 run time Lamp 2 run time Lamp 3 run time Lamp 4 run time Lamp operation mode status QIB Optional board slot status QPP P in P status QGD QGT Date setting status Time setting status Callback 001 000 1 0 RG1 RG2 VID SVD DVI AUX
S P E C F I L E PT-D10000 3-Chip DLP™ Projector Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector’s exhaust openings. 3.