Owner manual
Advanced (Recording pictures)
- 90 -
• Refer to P126 for the [MOTION PICTURE] Mode menu.
• The flash setting is fixed to [Œ].
• Refer to P206 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
• When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• Zoom speed may be slower than normal in recording motion pictures.
• If the Extended Optical Zoom was used before pressing the motion picture button, recordable
area will be changed drastically since these settings are canceled.
• Even if the aspect ratio setting is the same in still and motion pictures,
the angle of view may change at the start of the motion picture
recording. When [ REC AREA] (P27) is set to [ON], angle of view
during motion picture recording is displayed.
• [STABILIZER] is fixed to [MODE1] in recording motion pictures.
• When recording motion pictures, the following functions cannot be used.
– [], [ƒ], [Ù] in the AF Mode
(It will switch to [
Ø].)
– Direction Detection function
–
Extended
Optical Zoom
– [FACE RECOG.]
– [ISO LIMIT SET]
• It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
• If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power outage or if the AC adaptor (optional) is disconnected etc., the motion picture
being recorded will not be recorded.
A Example
image:
When [REC MODE] is set to [AVCHD(1080i)] and the
[ASPECT RATIO] is set to [W].
B : This section is not recorded in motion pictures.
A
B