Manual

193

8. Functions Customized for Various Subjects and Purposes

Using screens and displays suitable for

recording

Applicable modes:

The center of the recording screen will be displayed as [+].

This is convenient for operating the zoom while keeping the

subject at the center of the screen.

Settings: [ON]/[OFF]

Applicable modes:

You can check areas that may be white saturated by displaying areas above a certain

luminance level in a zebra pattern. You can also set the minimum luminance level

(brightness) to be processed as a zebra pattern.

Displaying the center of the screen ([Center Marker])

> [Custom] > [Center Marker]

Checking areas that may be white saturated ([Zebra Pattern])

> [Custom] > [Zebra Pattern]

[ZEBRA1]

Displays areas above a certain luminance level by a

right-leaning zebra pattern.

[ZEBRA2]

Displays areas above a certain luminance level by a

left-leaning zebra pattern.

[OFF] —

[SET]

Sets the minimum brightness level for each zebra pattern.

[Zebra 1]/[Zebra 2]

Press 3/4 to select the brightness, and press [MENU/SET].

•

You can select a brightness value between [50%] and [105%]. In [Zebra 2],

you can select [OFF]. If you select [100%] or [105%], only the areas that

are already white saturated are displayed in a zebra pattern. The smaller

the value is, the wider the brightness range to be processed as a zebra

pattern will be.