Manual

3. Basic Operation

∫ About focus range

The focus range is displayed when operating the zoom.

•

The focus range is displayed in red when it is not focused after

pressing the shutter button halfway.

The focus range may change gradually depending on the zoom

position.

e.g.: Range of focus during the Program AE Mode

• When [Duration Time] is set to [HOLD], [Playback Operation Priority] is fixed to [ON].

Subjects and recording conditions which are difficult to focus

•

Fast-moving subjects, extremely bright subjects or subjects without contrast

• When recording subjects through windows or near shiny objects

• When it is dark or when jitter occurs

• When the camera is too close to the subject or when taking a picture of both distant and near

subjects

Displaying a picture right after it is taken

> [Custom] > [Auto Review]

[Duration Time]

Set the length of time that the picture is displayed after taking the

still picture.

[HOLD]:

The pictures are displayed until shutter button is pressed halfway.

[5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]

[Playback Operation

Priority]

[ON] Switching the display of the playback screen, deleting

pictures, etc. are possible during [Auto Review].

[OFF] Button operations during [Auto Review] become the

same as those for recording.

400

∞

0.98ft.

1 m (3.3 feet)

30 cm (0.98 feet)