User Manual , Advanced

5. 4K Photo and Drive Settings

114

Taking Pictures using Burst Mode

Applicable modes:

Pictures are taken continuously while the shutter button is pressed.

Set the drive mode dial to [ ].

Focus on the subject and take a picture.

• Hold down the shutter button fully to activate the Burst

Mode.

∫ Changing the burst speed

Select the menu.

• The Burst speed may become slower depending on the following settings.

– [Picture Size] (P196)/[Quality] (P197)/[Sensitivity] (P105)/Focus Mode (P89)/[Focus/Release

Priority] (P222)

• Refer to P197 for information about RAW files.

> [Rec] > [Burst Rate]

[H]

(High speed)

[M]

(Middle speed)

[L]

(Low speed)

Burst speed

(pictures/second)

AFS 12 7 2

AFF/AFC 772

Live View during Burst Mode None Available Available

With RAW files 30 30 30

Without RAW files Depends on the capacity of the card

¢ Number of recordable pictures

When recording is performed under the test conditions specified by Panasonic.

The burst speed will become slower halfway. However, pictures can be taken until the

capacity of the card becomes full. Depending on recording conditions, the number of burst

pictures that can be taken will be reduced.

AFS

3:2

MOV