User Manual , Advanced

5. 4K Photo and Drive Settings
118
4
Record a 4K photo.
[]
[4K Burst]
1 Press the shutter button
halfway.
A Press and hold
B Recording is performed
2 Press and hold the shutter
button fully for as long as you
want to perform recording.
• Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
• If you are using Auto Focus, [Continuous AF] will work during
recording. Focus will be adjusted continuously.
• If you remove your finger from the shutter button immediately
after the start of recording, up to a period of approximately
1.5 seconds after the moment that the finger has been
removed may be recorded.
[]
[4K Burst(S/S)]
“S/S” is an
abbreviation of
“Start/Stop”.
1 Press the shutter button fully.
C Start (First)
D Stop (Second)
E Recording is performed
• If you are using Auto Focus,
[Continuous AF] will work during
recording. Focus will be adjusted continuously.
2 Press the shutter button fully again to stop recording.
Adding markers to select and save
pictures
You can add markers if you press [Fn5] during recording. (Up to
40 markers per recording) When selecting and saving
pictures
from a 4K burst file, you can skip to the positions where you
added markers.




