User Manual , Advanced

121

5. 4K Photo and Drive Settings

Selecting pictures from 4K burst file and saving

This section describes how to select pictures from a 4K burst file and save them.

For information on how to record 4K burst files, refer to P117.

1 Select an image with the [ ] icon on the playback screen, and

press 3.

• You can also perform the same operation by touching the icon [ ].

• If the image was recorded with [ ] ([4K Pre-Burst]), proceed to step

3 Drag the frames to select the frame you want to save

as a picture.

• You can also perform the same operation by pressing

2/1.

4 Touch [ ] to save the picture.

• The picture will be saved in JPEG format.

• The picture will be saved with recording information (Exif information), including its shutter

speed, aperture and ISO sensitivity information.

2 Drag the slide bar to make a rough selection of

scenes.

• For information on how to use the slide view screen, refer

to P122.

• If the image was recorded with [ ] ([4K Burst]) or [ ]

([4K Burst(S/S)]), you can select its scenes on the 4K

burst playback screen by touching [ ] (Fn4). (P123)

Slide view screen

You can save pictures taken during a 5 second period at once by using [4K PHOTO

Bulk Saving] in the [Playback] menu. (P244)

Fn5

Fn4