User Manual , Advanced

6. Stabilizer, Zoom and Flash

150

Setting the Flash Functions

Applicable modes:

Select whether to set the flash output automatically or manually.

1 Select the menu. (P51)

2 (When [MANUAL] is selected)

Select the menu.

3 Press 2/1 to select an item and then press [MENU/SET].

• You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].

Changing the firing mode

> [Rec] > [Flash] > [Firing Mode]

[TTL] The camera automatically sets the flash output.

[MANUAL]

Set the luminosity ratio of the flash manually. In [TTL] you can shoot the

photograph you want even when shooting dark scenes that may

otherwise be too brightly lit by the flash.

• When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on

the flash icon on the screen.

> [Rec] > [Flash] > [Manual Flash Adjust.]

• This item is available only when the built-in flash is used.