User Manual , Advanced

4. Focus, Brightness (Exposure) and Color tone Settings

Applicable modes:

You can optimize the focus and brightness for the position you have touched.

Select the menu. (P51)

Touch the subject you want to optimize the

brightness for.

• The brightness optimization position is displayed on the

center of the AF area. The position follows the movement

of the AF area.

• [Metering Mode] is set to [ ], which is used exclusively

for the Touch AE.

• Touching [Reset] returns the brightness optimization position and the AF area to the

center.

Touch [Set].

• The AF area with the same function as [Ø] is displayed on the touched position.

• Touching [ ] ([ ] when [Ø] is selected) will cancel the [AF+AE] setting.

Optimizing the focus and brightness for a touched position

> [Custom] > [Touch Settings] > [Touch AF] > [AF+AE]

When the background has become too bright, etc., the

brightness contrast with the background can be

adjusted by compensating the exposure.

• When recording with the Touch Shutter, the focus and brightness are optimized for the

touched position before recording takes place.

• At the edge of the screen, the metering may be affected by the brightness around the touched

location.

Not available in these cases:

• [AF+AE], which optimizes the focus and brightness, does not work in the following cases.

– When using the Digital Zoom

– When the AF area has been set by using the cursor button

– When [4K Live Cropping] is set

5HVHW

ュリヴヱハ

6HW