Manual

49
2. Getting Started/Basic Operations
3 Press [MENU/SET] and set.
•
When the recording screen is displayed, the original assignment settings for the dials are
restored.
• You can also complete this step by performing either of the operations below:
– Press the shutter button halfway
– Press [Fn11]
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1) or setting screen (step 2) is displayed. If you display a menu or turn off the camera
while making adjustments, the original assignment settings will be restored.
Setting the operation methods of the front dial and rear dial
> [Custom] > [Dial Set.]
Item Description of settings
[Assign Dial (F/SS)]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
[Rotation (F/SS)]
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[]/[]
[Exposure Comp.]
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[] (Front Dial)/[ ] (Rear Dial)/[OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[] ([Front dial operation])/[ ] ([Rear dial operation])
• Items that can be set are as follows.
– [Sensitivity] (P175)
– [White Balance] (P136)
– [AF Mode/MF] (P151)
– [Photo Style] (P130)
– [Filter Select] (P115, 132)
– [Aspect Ratio] (P140)
– [4K PHOTO] (P185)
– [Highlight Shadow] (P135)
– [i.Dynamic] (P143)
– [i.Resolution] (P143)
– [Flash Mode] (P234)
– [Flash Adjust.] (P237)
• [Highlight Shadow] uses the two dials. It will be automatically
assigned to both of the dials when you assign it to either of
them.
MENU