User Manual- Advanced

121
5. 4K Photo and Drive Settings
1 Select [ ] ([4K Burst]). (P118)
A Available recording time
2 Press the shutter button halfway.
3 Press and hold the shutter button fully for as long
as you want to perform recording.
•
Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
• A 4K burst file will be recorded while the shutter button is
pressed and held.
• If you are using Auto Focus, [Continuous AF] will work during recording. Focus will be
adjusted continuously.
• For information on how to select and save pictures from recorded 4K burst files, refer to P126.
• If you remove your finger from the shutter button immediately after the start of recording, up to
a period of approximately 1.5 seconds after the moment that the finger has been removed may
be recorded.
1 Select [ ] ([4K Burst(S/S)]). (P118)
A Available recording time
2 Press the shutter button fully.
•
Recording will start.
• If you are using Auto Focus, [Continuous AF] will work
during recording. Focus will be adjusted continuously.
3 Press the shutter button fully again.
•
Recording will stop.
• For information on how to select and save pictures from recorded 4K burst files, refer to P126.
Recording with [4K Burst]
Recording with [4K Burst(S/S)]
Recording tips
Adding markers to select and save pictures
You can add markers if you press [Fn1] during recording. (Up to 40 markers per
recording) When selecting and saving
pictures from a 4K burst file, you can skip
to the positions where you added markers.
60
p
AFSAFS
4K
4:3
0
R 5m0404s R 5m04s
A
60
p
AFSAFS
4K
4:3
0
R 5m0404s R 5m04s
A