User Manual- Advanced

135
5. 4K Photo and Drive Settings
∫ Setting the burst rate
After pressing 3 in step
2 on P134, press 2/1 to select the
burst rate, and press [MENU/SET].
¢1 Number of recordable pictures
¢2 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The picture size will be fixed to [S] when [Burst Rate] is set to [SH].
• The burst speed may become slower depending on the following settings.
– [Picture Size] (P192)/[Quality] (P193)/[Sensitivity] (P112)/Focus Mode (P95)/[Focus/Release
Priority] (P212)
∫ About the maximum number of pictures that can be taken continuously
When you press the shutter button halfway, the maximum number
of pictures you can take continuously will appear. You can check
the approximate number of pictures that can be taken before the
burst speed slows down.
Example: When 20 pictures can be taken: [r20]
• Once recording starts, the maximum number of pictures that can be taken continuously will
decrease. When [r0] appears, the burst speed will slow down.
• When [r99+] is displayed, you can take 100 or more pictures continuously.
Burst Mode
[SH]
(Super high
speed)
[H]
(High speed)
[M]
(Middle
speed)
[L]
(Low speed)
Burst speed
(pictures/
second)
Mechanical
shutter
—
8 (AFS)
6 (AFC)
62
Electronic Shutter 40
10 (AFS)
6 (AFC)
62
Live View during Burst Mode None None Available Available
¢1
With RAW files — 40 or more
¢
2
Without RAW files Max. 120 100 or more
¢
2
SH H M
LV
L
LV
2020r20
0
2 00