User Manual- Advanced

239
9. Using Menu Functions
• The erasure operation can only be performed
by touching. [Clear Retouch] automatically
enables the touch operation.
> [Playback] >
[Clear Retouch]
1 Press 2/1 to select a picture, and then press
[MENU/SET].
2 Drag your finger over the part you want to delete.
•
The parts to be erased are colored.
• Touching [Undo] will return the colored part back to its
previous state.
3 Touch [Set].
4 Touch [Save] or press [MENU/SET].
•
Pictures may appear unnatural because the background of deleted parts is artificially created.
• For group pictures, perform [Clear Retouch] on each picture.
(They cannot be edited at once.)
• When [Clear Retouch] is performed on group pictures, they are saved as new pictures separate
from the original ones.
Not available in these cases:
•
Not available when the viewfinder is in use.
• This function is not available in the following cases:
– Pictures taken in Panorama Shot Mode
– Motion pictures
– 4K burst files
– Images recorded with [Post Focus]
– Pictures taken with [ ]
[Clear Retouch]
Erasing details (enlarging the display)
1 Touch [SCALING].
•
Pinching out/pinching in (P51) the screen allows you
to enlarge/reduce it.
• Enlarge/reduce can also be performed by rotating
the rear dial.
• Dragging the screen allows you to move the
enlarged part.
2 Touch [REMOVE].
•
This will bring you back to the operation of dragging your finger over the part you
want to delete. The part you want to delete can be dragged even while the picture is
enlarged.
MENU
6HW
6&$/,1*
5(029(
8QGR
8QGR
6&$/,1*
5(029(
6HW