User Manual

235

8. Stabilizer, Zoom and Flash

• Press [DISP.] to fire a test-flash.

A Firing Mode

B Flash output

C Luminosity ratio

[External

Flash]

[Firing Mode]

[TTL]: The camera automatically sets the output.

[AUTO]: Flash output is set by the external flash.

[MANUAL]: Set the luminosity ratio of the external flash manually.

[OFF]: The flash on the camera side emits only communication light.

[Flash Adjust.]

Set the flash output of the camera manually when [Firing Mode] is set to

[TTL].

[Manual Flash Adjust.]

Set the luminosity ratio of the external flash when [Firing Mode] is set to

[MANUAL].

• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.

[A Group]/

[B Group]/

[C Group]

[Firing Mode]

[TTL]: The camera automatically sets the output.

[AUTO]: The wireless flashes automatically set the output.

[MANUAL]: Set the luminosity ratio of the wireless flashes manually.

[OFF]: The wireless flashes of the specified group will not fire.

[Flash Adjust.]

Adjust the output of the wireless flashes manually when [Firing Mode] is set to

[TTL].

[Manual Flash Adjust.]

Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to

[MANUAL].

• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.