Operating Instruction Digital Camera DMC-LC80PP, DMC-LC70PP, DMC-LC50PP

Recording pictures (basic)
45
Taking Pictures with the Self-timer
Preparation
Set the mode dial except for [ ]/[ ]. (P29)
1 Switch the self-timer setting.
: Self-timer set to 10 seconds
;
: Self-timer set to 2 seconds
;
No display (canceled)
2 Focus on the subject to take the
picture.
If you press the [MENU] button
when the self-timer is set, the
self-timer setting is canceled.
¬
Suggestions/Tips
¬
When using a tripod or in other cases,
setting the self-timer to 2 seconds is a
convenient way to stabilize the jitter
caused by pressing the shutter button.
The self-timer
indicator 1 blinks
and the shutter is
activated after
10 seconds (or
2 seconds).
When pressing the button fully with
one stroke, the subject is automatically
focused after the self-timer indicator
turns off.
In Simple mode [ ], the self-timer
can only be set to 10 seconds.
When setting the self-timer in the burst
mode, you can take only 1 picture.
We recommend using a tripod when
setting the self-timer.
WB
1600
19
1600
19
CANCEL
MENU
DMC-LC80.book 45 ページ 2004年6月15日 火曜日 午後5時49分