Operating Instruction Digital Camera DMC-LC80PP, DMC-LC70PP, DMC-LC50PP

Recording pictures (advanced)
68
Using the AF Trigger
(DMC-LC80/DMC-LC70)
Prefocus is a technique to focus on the point where the subject comes in advance,
and it is used when taking a picture of the subject with quick motion.
This function is suitable when the distance between the camera and the subject is
certain.
Preparation
Set the mode dial except for [ ]/[ ]/[ ]. (P29)
1 Select [AF TRIGGER] and set it to
[FOCUS].
Close the menu by pressing
[MENU] button after finishing the
setting.
2 Aim the AF area to the point
where you want to focus (P30) and
press the [FOCUS] button.
When the subject is focused, the
AF area turns from white to green
and the focus indication 1 lights up
for 1 second. If the subject is out of
the focus range, the focus
indication will keep on blinking.
Even when pressing the shutter
button halfway, the focus will not be
changed unless you press the
[FOCUS] button again.
When you press the shutter button
halfway, [ ] indication
disappears and then the aperture
value and the shutter speed are
displayed.
When you press the shutter button
halfway without pressing the
[FOCUS] button, the [ ]
indication turns to red.
WBWB
SELECT SET EXIT
MENU
REC
2
/
3
SETUP
AF TRIGGER
AUDIO REC.
SHUTTER
D.ZOOM
OFF
FOCUS
OFF
SPOT MODE
OFF
1600
19
AF
FOCUS
AF
FOCUS
AF
FOCUS
DMC-LC80.book 68 ページ 2004年6月15日 火曜日 午後5時49分