User Manual

288
SQW0021
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
3
(→287)
2
Use to select the item and press [MENU/SET]
• [Multi Select]: Scroll between pictures with , select pictures to print with the
[MENU/SET]. (Press [MENU/SET] again to release selection.)
Use to select [OK], and press [MENU/SET].
• [Select All]: Print all pictures.
• [Print Set (DPOF)]: Print pictures selected in [Print Set]. (→220)
• [Favorite]: Print pictures selected as [Favorite]. (→219)
3
Use to select [Print start] and press [MENU/SET]
(Print settings (→290))
• Select [Yes] if print confirmation screen is displayed.
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Turn off the camera before inserting or removing memory cards.
●
Disconnect USB connection cable (supplied) after printing.
●
Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional). When
the battery starts to run out during connection, a warning beep sounds. Cancel printing and
disconnect USB connection cable.
●
An orange “●” displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures.
(Remaining sheets display may differ from the number of pictures set for printing.)
Not available in the following cases:
●
Motion pictures cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)